基于小波的全局多源遥感图像信息融合方法

提出的图像信息融合方法用于解决传统方法在空间分辨率等方面的不足。原始图像经过小波变换，分解成子图像，再进行分块处理，高、低分辨率图像根据全局方差准则分别计算融合的权值系数，进行图像融合重建，然后，对图像采用全局法进行信息融合，实验表明，方法切实可行，能使低分辨率图像接近于高分辨率图像。     

Optical and thermal properties of poly(ethylene oxide) doped with MnCl2 salt

The optical and thermal properties of prepared poly(ethylene oxide)/MnCl₂ films were studied as a function of MnCl₂ concentration at room temperature. The observed optical energy gap (E_opt) and energy gap tail (ΔE) were determined from the measured absorption spectra. It was found that the optical energy gap decreases with MnCl₂ concentration, and the absorption coefficient reduces sharply at concentration of 5 wt% MnCl₂ compared with the neat PEO. Differential scanning calorimetry (DSC) measurement shows that the heat of fusion increases with the MnCl₂ concentration, while the melting point decreases. Correlation between the observed optical energy gap and heat of fusion is presented.     

电路板故障诊断中神经网络信息融合技术的应用

将信息融合技术应用到导弹电子设备的电路板故障诊断之中．提出了一种基于红外热成像实验的温度故障隶属度函数构造形式以及改进的BP神经网络算法。进行了BP神经网络信息融合故障诊断的实验研究．从结果看信息融合能较好地解决电路板元件故障诊断的不确定性问题。     

Development of a Sensor Fusion Strategy for Robotic Application Based on Geometric Optimization

Fusion of multi-sensor information is an important technology, which is growing exponentially due to its tremendous application potential in many areas. Effective fusion of data from sensors is very critical in increasing an intelligent system's capability to accomplish complex tasks. Appropriate fusion technologies are needed to be developed specially when a system requires redundant sensors to be used. More the redundancy in sensors, more is the computational complexity for controlling the system and more is its intelligence level. This research presents a strategy developed for multiple sensor fusion, based on geometric optimization. Each sensor's uncertainty has been modeled using classical Lagrangian optimization techniques. However, the uniqueness and effectiveness of the present technique lies on the fact that starting from the optimized value as initial estimate the accuracy of the sensory information has further been improved up to any pre defined bounded range, by developing two architectures – FFA (fission–fusion architecture) and FDD (fusion in differential domain). Sufficient evidences and analyses have been provided in the paper to show its effectiveness in various applications.     

钢骨架塑料(PE)复合管的安装技术

钢骨架塑料复合管既有钢管的耐压又有塑料管的耐腐蚀性，且易于敷设，使用寿命长，本文结合实际施工中的应用。介绍其要点。     

一种多传感器信息融合点目标识别方法（二）

提出了一种多传感器信息融合识别空间复杂弹道式目标及其伴随诱饵的识别模型。将人工神经网络和确定性理论结合起来，以神经网络的输出代替应用确定性理论所需的有关领域专家的知识和经验，并用确定性理论进行不同空域和时域的信息融合。仿真结果表明，经过融合后，大大改善了识别效果。     

基于距离信息扩展原理的物体识别方法

利用稀疏距离图象与灰度图象相结合，通过射影变换可使灰度图象特征有条件地获取距离信息，这称为 基于射影变换的距离信息扩展原理。利用这些距离信息可计算物体表面平面图形的欧氏空间不变量并对景物中的 物体产生假设。由于初始假设建立在可靠的基础上，并使用了带反馈的混合控制策略，使这种基于模型的物体识别 定位技术具有实用的前景。此文讨论了整个方法的原理及其实施方案，并实验验证了原理的正确性与有效性。     

C~3Ⅰ中的多传感器数据融合技术

首先对多传感器数据融合技术进行了综述，再以国内外发表的文献为例说明了数据融合技术在C3I中的应用，最后对数据融合技术进行了展望，并提出了我们的对策。     

采用信息融合技术的IR／MMW复合导引头的目标跟踪

从误差测量环节入手，基于IR／MMW双模结构，采用信息融合处理技术提高其估计跟踪精度，最终达到降低制导误差，提高武器性能的目的，仿真结果验证了该方法的有效性。     

Non‐reflecting artificial boundaries for transient scalar wave propagation in a two‐dimensional infinite homogeneous layer

This paper presents an exact non‐reflecting boundary condition for dealing with transient scalar wave propagation problems in a two‐dimensional infinite homogeneous layer. In order to model the complicated geometry and material properties in the near field, two vertical artificial boundaries are considered in the infinite layer so as to truncate the infinite domain into a finite domain. This treatment requires the appropriate boundary conditions, which are often referred to as the artificial boundary conditions, to be applied on the truncated boundaries. Since the infinite extension direction is different for these two truncated vertical boundaries, namely one extends toward x →∞ and another extends toward x→‐ ∞, the non‐reflecting boundary condition needs to be derived on these two boundaries. Applying the variable separation method to the wave equation results in a reduction in spatial variables by one. The reduced wave equation, which is a time‐dependent partial differential equation with only one spatial variable, can be further changed into a linear first‐order ordinary differential equation by using both the operator splitting method and the modal radiation function concept simultaneously. As a result, the non‐reflecting artificial boundary condition can be obtained by solving the ordinary differential equation whose stability is ensured. Some numerical examples have demonstrated that the non‐reflecting boundary condition is of high accuracy in dealing with scalar wave propagation problems in infinite and semi‐infinite media. Copyright © 2003 John Wiley & Sons, Ltd.