Kernel Spectral Matched Filter for Hyperspectral Imagery

In this paper a kernel-based nonlinear spectral matched filter is introduced for target detection in hyperspectral imagery, which is implemented by using the ideas in kernel-based learning theory. A spectral matched filter is defined in a feature space of high dimensionality, which is implicitly generated by a nonlinear mapping associated with a kernel function. A kernel version of the matched filter is derived by expressing the spectral matched filter in terms of the vector dot products form and replacing each dot product with a kernel function using the so called kernel trick property of the Mercer kernels. The proposed kernel spectral matched filter is equivalent to a nonlinear matched filter in the original input space, which is capable of generating nonlinear decision boundaries. The kernel version of the linear spectral matched filter is implemented and simulation results on hyperspectral imagery show that the kernel spectral matched filter outperforms the conventional linear matched filter.     

CDMA系统中联合功率控制、波束赋形与多用户检测

应用功率控制、波束赋形和多用户检测可以有效地消除和减少CDMA系统中的干扰。本文结合波束赋形和多用户检测的特性，提出一种应用波束赋形增益和多用户相关矩阵的解相关算法。基于算法的复杂性，提出一种区分聚集用户进行多用户检测的的算法。由于波束赋形能够消减主瓣波束之外的多用户干扰，对聚集移动台采用解相关检测达到减少运算量和消除多用户干扰的目的。对算法进行了仿真分析，证明了本算法的优越性。     

Investigation on vapor-cooled current leads operating in a pulse mode

This paper describes transient numerical modeling for thermal characteristic of vapor-cooled current leads under pulse operation. The transient thermal analysis considers the temperature difference between a helium gas flow and a copper lead with temperature dependent properties of helium gas, copper and stainless steel. The numerical analysis was validated by an experiment with commercially available 100 A vapor-cooled current leads. A proper overloading factor calculation and the effect of intermediate cooling are presented for the current leads under pulse operation, which can significantly reduce heat input to a cryostat.     

A Theoretical Framework for Core Material Properties Identification in Cellular Solids using Novelty Detection

Abstract:  This paper presents a novelty detection-based technique to identify core material properties of honeycombs and cellular structures. A numerical model (finite element) representing full scale and/or reduced size of the cellular solid is used to generate transmissibilities between topological homologous points at cells in different locations. In order to make the procedure robust against noise, these transmissibilities are artificially corrupted. This step is representative of a series of experimentally obtained measurements which automatically return information relating to the size and shape of data noise along with the mean measurement. The next stage, both in this paper and in the proposal for the experimental approach, is to generate several further sets of transmissibilities from the finite element model; the only difference being that the core material properties are altered from the original values. A novelty detection framework is then adopted to find a similarity measure between each of these 'test' transmissibilities and the original set thereby identifying the material properties. Although this work is concerned with identifying only one material property, the methodology extends to identifying several properties.     

Threshold and growth mechanism of fatigue cracks under mode II and III loadings

ABSTRACT The fatigue crack growth behaviour of 0.47% carbon steel was studied under mode II and III loadings. Mode II fatigue crack growth tests were carried out using specially designed double cantilever (DC) type specimens in order to measure the mode II threshold stress intensity factor range, ΔK_IIth. The relationship ΔK_IIth > ΔK_Ith caused crack branching from mode II to I after a crack reached the mode II threshold. Torsion fatigue tests on circumferentially cracked specimens were carried out to study the mechanisms of both mode III crack growth and of the formation of the factory‐roof crack surface morphology. A change in microstructure occurred at a crack tip during crack growth in both mode II and mode III shear cracks. It is presumed that the crack growth mechanisms in mode II and in mode III are essentially the same. Detailed fractographic investigation showed that factory‐roofs were formed by crack branching into mode I. Crack branching started from small semi‐elliptical cracks nucleated by shear at the tip of the original circumferential crack.     

一种基于PWM的半桥型开关电源

主要介绍了由SG3525组成的半桥型开关稳压电路的结构和工作原理，阐述了PWN集成电路SG3525的特性和主要功能。实践表明：该系统工作稳定，运行效果良好。     

电梯门机控制系统的运行曲线设计

为了实现电梯轿厢门的开门和关门快速且平稳地运行，介绍了一种基于高性能微型机的门机控制系统结构和门位移的检测原理，以门位移量作为控制系统的反馈量，对门机运行速度进行了分区设计。在高速附近的变化区，门机速度匀速变化时，进行了门机开门和关门控制曲线的计算，推导出运行位移与门机速度具有二次曲线的关系，进而对微型机控制的软件流程进行了设计，达到了门机高低速运行的平稳过渡。最后，给出了实际运行系统的主电路电压波形。     

实验应变／应力模态分析若干问题的进展评述

本文评述了实验应变／应力模态分析进展的若干基本问题。主要是：应变响应与位移响应的关系；应变频响函数矩阵的特点及其测量方法；应变模态的加权正交性及其识别方法；以及其他问题。     

The TDCPR Management Mode of Engineering Equipment

The Three Gorges Project is a very large project,and its structure is very complex.Interna-tional advanced engineering equipment is broadly used.The state of equipment running directly influ-ences project building qualities and limited time.According to the factud conditions of the Three Gor-ges Project,the characteristics of engineering equipment are analyzed.At the same time ,some theories about equipment management are induced ,and the TDCPR management mode of engineering equip-ment of the Three Gorges Project is put forwared in order to gain the aim of managing and using equip-ment well and speeding up the project construction.     

分子振动态及其跃迁的激光相干控制

讨论了激光合成相干叠加态的原理及其性质 ,针对 XY2 型分子 ,证明了合成局域模振动的可行性 ,然后给出相干叠加态的跃迁几率特征 ,发现它仍表现出相干的特性 ,对之进行分析研究表明 ,分子的振动态具有可控性 ,态跃迁几率具有可控性。