网络环境下高职学生英语自主学习探究

从自主学习的重要性出发,论述了网络环境下学生自主学习的内涵,以及自主探究学习模式的评价标准,从而探究网络环境下提高高职学生自主学习能力的有效途径.     

热挤压变形力计算的研究

本文考虑到变形区内切应力非线性分布的特点,采用球坐标系下的平衡微分方程和塑性条件联立求解,得出圆棒热挤压时变形区入口球面上的应力分布方程,然后应用功平衡法导出了圆棒热挤压力的计算公式。     

淀粉接枝共聚物制备的影响因素的研究进展

综述了制备淀粉接枝共聚物过程中,淀粉种类、其是否糊化,引发剂及单体的选择及其用量,以及反应温度和反应时间等因素对制备淀粉接枝共聚物的影响,指出应根据所需产物性能要求,综合考虑各方面因素的影响.并提出开发新的廉价而高效的引发剂成为市场所需,淀粉制备工艺的简约处理以及性能优良的淀粉衍生物产品的开发值得人们进一步的深入探讨.     

试样厚度对共聚聚烯烃材料断裂行为参数的影响

采用基本断裂功法对共聚聚丙烯压制双边缺口拉伸试样的断裂行为进行研究,分析了厚度变化对材料多项断裂参数的影响。结果表明,当厚度在0.6 mm~1.1 mm时,材料的断裂韧性we随厚度增大呈现出明显的下降趋势,下降幅度约30%,主要由屈服后的we,n降低所致,屈服前的we,y无明显变化;材料的比塑性功βwp随厚度增大未呈现明显的变化,且屈服前的βywp,y和屈服后的βnwp,n均无明显变化。同时求得了外推的零韧带断裂位移e0,b和最大载荷P0,y,随厚度增大,前者具有一定的下降趋势,后者则显示出较大的增长趋势。     

论包装设计生态化与民族文化

论述了包装生态学与产品之间以及人与自然的关系.从民族文化历史、人文以及风土人情的角度,分析比较国内外各民族文化的特色,从而使中国的设计水平能达到天人合一的境界寻找理论依据.     

摩托车离合器主轴断裂失效分析及其机理

本文分析了摩托车离合器主轴用材、金相组织、显微硬度以及断口扫描电镜(SEM)宏观、微观形貌,结果表明,该摩托车离合器主轴断裂主要原因是轴颈突变截面尖角顶端曲率半径ρ值太小,形成很大的应力集中从而形成裂纹源,然后裂纹逐步扩展造成的。     

Effect of doping cobalt on the micro-morphology and electrochemical properties of birnessite MnO2

Birnessite-type MnO₂ nanoparticles are synthesized by mixing KMnO₄ solution directly with ethylene glycol under ambient conditions. When cobalt exists in the solution, the micro-morphology of the products transforms from conglomeration to dispersive state. The result of transmission electron microscopy (TEM) and field emission scanning electron microscopy (FE-SEM) shows that the product is constructed with nanosphere in sizes of ca. 40 nm. These nanospheres are twisted by nanorods clusters. X-ray diffraction (XRD) pattern shows that the products are birnessite-type. The electrochemical properties of the prepared materials are studied using cyclic voltammetry (CV) and galvanostatic charge–discharge test in aqueous electrolyte. The product shows a very high specific capacity of 326.4 F g⁻¹. These results indicate that cobalt has great effects on the micro-morphology and electrochemical properties of manganese dioxide.     

Localizable imaging study for the noninvasive diagnosis of lesions with the backscattering polarized light

The asymmetry appearing in the degree of polarization (DOP) distribution of the backscattering polarized light from tissues is investigated by using polarized Monte Carlo simulation. When the incident point is close to the boundary of the lesion inside the tissue, high asymmetry emerges regardless of the polarized direction of the incident light. A noninvasive method based upon the DOP asymmetry of the backscattering light is proposed to locate lesions hidden in live tissues by scanning a point light source. Imaging of the front projection on complicated lesion structures is demonstrated with this method. Its transverse resolution, which is affected by the wavelength of incident light and the size of the scattering particle, can reach the diameter of the lesion scattering particle theoretically while the best longitudinal detection depth can be achieved by choosing a suitable incident wavelength according to the scattering characters of the tissue.     

New Group-Contribution Method for Predicting Temperature-Dependent Properties of Pure Organic Compounds

A new method for predicting temperature-dependent properties of organic compounds is presented. It is a combination of a group-contribution method with the novel non-random hydrogen-bonding (NRHB) equation-of-state theory. First-order and second-order groups are used to predict the three characteristic scaling constants of the NRHB model. With these scaling constants, one is able to estimate/predict temperature-dependent properties of pure organic compounds such as vapor pressure, liquid density, heat of vaporization and more, in a wide range of temperatures. The influence parameter, κ, which is needed for the estimation of surface tension at any given temperature, is also predicted by the same group-contribution method     

地下煤制气制取液化天然气和液氢工艺研究

目的脱除地下煤制气中的酸气,将地下煤制气中的CH₄和H₂分离出来并液化。 方法对常见的分离方法进行对比,确定采用低温精馏法对煤制气进行脱酸气、分离CH₄和H₂并液化。根据低温精馏法的原理,设计了一种全新的地下煤制气脱酸气、分离CH₄和H₂并液化的工艺流程,该工艺主要由两个精馏塔、一个两相分离器和三级氦膨胀制冷系统组成。同时利用HYSYS软件对其进行模拟分析,确定最优参数。 结果该工艺可以将地下煤制气中CO₂的摩尔分数脱除到0,H₂S的摩尔分数脱除到3.65×10-14,满足处理要求。同时可以实现CH₄回收率为99.97%,加压液化天然气(PLNG)的摩尔分数为99.97%,H₂的回收率为98.30%,液氢(LH₂)的摩尔分数为99.99%。 结论该工艺可以有效利用地下煤制气制取PLNG和LH₂,且所需能耗较传统工艺能耗降低了11.64％,具有较高的经济效益。 