Dynamic equivalent method of interconnected power systems with consideration of motor loads

The existing equivalent methods usually only deal with static load models and neglect the dynamic characteristics of loads such as induction motors.This paper presents a dynamic equivalent method which considers motor dynamics.At first,the clustering criterion of motor loads is given.The motors with similar dynamic characteristics are classified into one group.Then,reduction of motors in the same group is carried out.Finally,parameters of the equivalent motor are calculated and the equivalent system is thus...     

省级机动车排气检测监管系统应用研究

为解决当前我国省级环保部门对机动车排气检测监管的实际困难,提高机动车排气污染监管能力,介绍了省级机动车排气检测监管信息系统的构建方法,提出了系统的整体技术框架、网络架构和功能模块组成,并阐述了基于Web services的省—市数据交换技术和自定义统计报表技术的实现方法。以广东省为例开发了原型系统,试运行结果初步显示了系统的实际运行能力。该系统方案能有效解决当前省级环保部门机动车监管所面临的实际问题。     

基于“U”形转子空调风机单相永磁同步电动机

研究一种"U"形转子的空调风机单相永磁同步电动机,通过合理设计,使得单相永磁同步电动机与同容量的单相异步电动机的材料成本基本相同,效率大幅提高,实现了电机的高性价比.     

基于PLC的步进电机转速控制方法研究

概述了PLC控制的优点、步进电机的工作原理。提出了一种基于PLC的四相步进电机控制方法,介绍了系统的硬件组成以及相应的I/O分配。软件设计包括脉冲产生和控制、脉冲分配及步数设定三大模块,用软件完成脉冲分配功能,可以减少硬件资源,控制参数改变方便灵活,提高了系统控制的可靠性和灵活性。     

基于MATLAB/SIMULINK的异步电动机软起动控制系统的仿真

针对异步电动机直接起动会产生很大起动电流的特性,提出了一种基于PID控制原理的异步电动机软起动控制方法。利用MATLAB/SIMULINK对此闭环控制系统建立了仿真模型并进行了仿真实验。仿真结果表明采用PID控制的软起动控制方法可以有效地限制异步电动机的起动电流,因此该控制方法是正确有效的。     

Fabricated and friction test anisotropy material of ultrasonic motor

The twisters for composed of anisotropic material were designed and manufactured.And two kinds of directional-composites were made:one was fiber direction vertical with frictional interface and another was parallel with frictional interface and moving direction.By varying the proportions of epoxy resin and fiber and arranging the orientations of fiber,the composites anisotropy along longitudinal and circumferential were got.Using density measurement,the mass fraction of resin and fiber were calculated.According to composite meso-scopic mechanics,the elasticity constants of composite were analyzed and calculated.The composite different thicknesses were sliced,and attach to the rotor,then the load characteristics,no-load speed,stop load of ultrasonic motor(USM)were test.The output properties of USM with 0.6 mm thickness composite were superior.The effect of friction material on ultrasonic motor was analyzed.Elastic modulus,thickness and micro-morphology of material are main factors which affect characteristics of ultrasonic motor.     

利用密度聚类支持向量机的气象云图云检测

为了提高气象云图云检测的判识精度和计算效率,提出一种基于密度聚类支持向量机(DC-SVM)的云检测方法。分析了MTSAT气象云图的特征提取和选择方案,建立了云和下垫面的分类样本集;在SVM学习中,通过引入样本集的纯度及充足度,选择关键样本,减少了噪声和异常样本的干扰,从而降低了计算复杂度,提高了分类精度。实验表明,该算法的分类正确率较BP神经网络及传统SVM的方法分别提高了2.54%和0.21%,训练时间及测试时间也明显减少;而且,该方法还克服了传统云检测方法需要根据先验知识确定阈值的缺点,检测结果与人工解译结果基本吻合。     

基于PLC的内壁自动喷涂机控制系统设计

设计了一种适合于圆形内表面喷涂的数控喷涂机的控制系统,采用PLC可编程序控制实现了对喷涂电流、电压、涂层温度等工艺参数实时监测和控制。该控制系统具有结构紧凑、运动灵活、占用空间少、工作可靠、节能、装卸料容易等优点,适用于小型圆形工件内壁喷涂生产。     

基于力矩电机的复合材料缠绕机构张力控制系统

介绍了一个复合材料缠绕机构的张力控制系统,该系统研究了一种新的执行机构一力矩电机的工作特性和驱动电路,采用电阻应变式张力传感器结合三辊式结构测定张力,以力矩电机为执行机构,利用单片机实现对张力的PID控制,实验结果表明,该系统在各种缠绕过程中都具有较好的控制效果和鲁棒性。     

单片机控制的开环NC加、减速方法的实现

介绍了指数加、减速法,并采用等幅均匀的离散型,将指数形式离散化处理来实现步进电动机升、降速控制,给出了程序流程图和相关代码.