Decomposition of Time Series Dynamic Linear Models

This paper derives the admissible decompositions for a time series dynamic linear model, assuming only that the model is observable. The decompositions depend on factorizations of the characteristic polynomial of the state evolution matrix G into relatively prime factors. This generalizes the method of West (1997 ) which considers one decomposition in the particular case where G is diagonalizable. Conditions are derived for a decomposition to be independent. These results show that no autoregressive process of order d has an independent decomposition for any integer d . Two illustrations of this procedure are discussed in detail.     

带有块间串扰MC-CDMA的时域信道估计和多用户检测

本文把带有IBI的MC-CDMA系统等效解释为特殊的直接序列码分多址（DS-CDMA）系统，并给出了相应的时域信道估计方法和时域线性最小均方误差（MMSE）多用户检测方法。仿真实验表明了本文方法的性能。     

孔隙度校正缺乏理论依据

储油岩石一般为致密介质。致密介质在应力作用下，以本体变形（弹性变形）为主，孔隙度不发生变化。油气储量计算时，地面实测孔隙度不发生变化。油汽储量计算时，地面实测孔隙度不需要进行校正。传统的孔隙度校正无形中损失了一部分地质储量，同时为确定校正值大小也浪费了大量人力和物力。致密岩石弹性变形过程中的孔隙度不变性原则将给储量计算带来很大的方便。     

Complex system reliability modelling with Dynamic Object Oriented Bayesian Networks (DOOBN)

Nowadays, the complex manufacturing processes have to be dynamically modelled and controlled to optimise the diagnosis and the maintenance policies. This article presents a methodology that will help developing Dynamic Object Oriented Bayesian Networks (DOOBNs) to formalise such complex dynamic models. The goal is to have a general reliability evaluation of a manufacturing process, from its implementation to its operating phase. The added value of this formalisation methodology consists in using the a priori knowledge of both the system's functioning and malfunctioning. Networks are built on principles of adaptability and integrate uncertainties on the relationships between causes and effects. Thus, the purpose is to evaluate, in terms of reliability, the impact of several decisions on the maintenance of the system. This methodology has been tested, in an industrial context, to model the reliability of a water (immersion) heater system.     

Runout analysis in fatigue investigation

Those individual tests in a series of experiments that are not completed or must be suspended are known as “censored points,” or “runouts”. Inclusion of runouts in data analysis can be problematic, and such ad hoc approaches as ignoring the runout observation or treating it as a failure can significantly affect estimation. The methodology offered here alleviates the handling of runouts and censored data by using the maximum likelihood estimation (MLE) method to incorporate the censored data properly. The methodology is illustrated with an example problem using actual data and the affects of ad hoc approaches are illustrated.     

高层建筑结构设计的分析判断与优化

对高层建筑设计而言,设计前期的初步结构方案需通过结构软件的计算分析,判断该方案是否正确与合理,从而对其进行有针对性的修改和优化。文章结合具体实例,介绍了分析判断计算结果的主要几项内容及可采取的相应优化措施,从而可以提高设计的准确性和工作效率。     

轮式工程机械轮边减速器优化模型与方法

论述了重构轮式工程机械轮边减速器优化设计数学模型的必要性,给出了精确化的目标函数,全面化和准确化的设计变量、基于并行设计的约束条件;介绍了对优化解适用性评价的方法和手段。巧妙地解决了优化解中离散变量的圆整问题,提供了基于MATLAB的求解反渐开线函数的M文件。     

Assumptions and Consequences of Treating Providers in Therapy Studies as Fixed Versus Random Effects: Reply to Crits-Christoph, Tu, and Gallop (2003) and Serlin, Wampold, and Levin (2003).

In their comments on the authors' article (see record 2003-10163-009), R. C. Serlin, B. E. Wampold, and J. R. Levin (see record 2003-10163-011) and P. Crits-Christoph, X. Tu, and R. Gallop (see record 2003-10163-010) took issue with the authors' suggestion to evaluate therapy studies with nested providers with a fixed model approach. In this rejoinder, the authors' comment on Serlin et al's critique by showing that their arguments do not apply, are based on misconceptions about the purpose and nature of statistical inference, or are based on flawed reasoning. The authors also comment on Crits-Christoph et al's critique by showing that the proposed approach is very similar to, but less inclusive than, their own suggestion. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Motion compensated film restoration

Motion picture films are susceptible to local degradations such as dust spots. Other deteriorations are global such as intensity and spatial jitter. It is obvious that motion needs to be compensated for before the detection/correction of such local and dynamic defects. Therefore, we propose a hierarchical motion estimation method ideally suited for high resolution film sequences. This recursive block-based motion estimator relies on an adaptive search strategy and Radon projections to improve processing speed. The localization of dust particles then becomes straightforward. Thus, it is achieved by simple inter-frame differences between the current image and motion compensated successive and preceding frames. However, the detection of spatial and intensity jitter requires a specific process taking advantage of the high temporal correlation in the image sequence. In this paper, we present our motion compensation-based algorithms for removing dust spots, spatial and intensity jitter in degraded motion pictures. Experimental results are presented showing the usefulness of our motion estimator for film restoration at reasonable computational costs. Received: 9 July 2000 / Accepted: 13 January 2002 Correspondence to:S. Boukir     

仿西班牙横移车断齿事故分析及改进

某炼钢厂仿西班牙产品制造的板坯横移车运行机构采用分别驱动、变频调速、无人操纵自动控制技术。其减速器齿轮多次发生点蚀、塑性变形、断齿等事故或故障 ,严重时曾出现轮齿全部被剃光的现象。经分析 ,其根本原因是承载能力不足。通过重新选型设计 ,加大减速器中心距 ,彻底根除了断齿等事故隐患