Hydrothermal upgrading of wood biomass: Influence of the addition of K2CO3 and cellulose/lignin ratio

The hydrothermal treatment of two different wood biomass samples such as cherry (hard wood) and cypress (soft wood), whose composition is different i.e. lignin, cellulose and hemicellulose were performed at 280 °C for 15 min with aq. K₂CO₃ with different concentrations (0–1 M). The soft wood biomass contains higher lignin content than hard wood biomass. The cellulose rich cherry wood biomass produced higher proportion of acetic acid than cypress. The lignin rich cypress produced the hydrocarbons with major portion of phenolic hydrocarbons and derivatives than cherry. The total oil yields from both cherry and cypress wood biomass produced 50 wt% of liquid hydrocarbons at 280 °C for 15 min with 0.5 M K₂CO₃ solution. The volatility distribution of liquid hydrocarbons showed the characteristic features of soft and hard wood biomasses.     

Development of a predictive model for polymer/solvent diffusion coefficient calculations

A new calculation procedure for free‐volume parameters is considered in this work by using viscosity prediction methods and the Levenberg‐Marquardt calculation scheme. All parameters used in the Vrentas–Duda free‐volume theory can be estimated from pure component properties. The prediction results are compared with experimental data for some polymer/solvent systems. The diffusion coefficient calculated by Vrentas–Duda theory can be used in the modeling of membrane separation processes. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

白云鄂博主矿开拓运输工艺转换有关问题的探讨

本文对白云鄂博主矿采场铁公路联合运输向公路运输转换位置是否确定为1638m水平以及运输工艺转换过程中相关问题进行分析论证，提出主矿采场铁路至少可向下延深一个水平，技术上可行，节约运费千万元以上。     

国产50%离子膜法烧碱蒸发装置及运行情况

介绍了升降膜法双效逆流蒸发生产50%离子膜法烧碱的工艺流程、主要设备、装置特点及运行情况.     

Ergodicity of filtering process by vanishing discount approach

A new approach to study ergodicity of filtering processes is presented. It is based on the vanishing discount approach to discounted functional of filtering process. We show that limit superior of the Cesaro averages of the functionals is the same for all initial conditions from which the uniqueness of invariant measures of filtering processes follows. The approach is based on certain assumption for which we provide a sufficient condition using concavity arguments. In addition we show the existence of solutions to the Poisson equation corresponding to filtering process with concave functional. The assumptions are then extended to the controlled case and using similar concave arguments we obtain the existence of solutions to the Bellman equation corresponding to partially observed average cost per unit time problem.     

Parametric and nonparametric Bayesian model specification: A case study involving models for count data

In this paper we present the results of a simulation study to explore the ability of Bayesian parametric and nonparametric models to provide an adequate fit to count data of the type that would routinely be analyzed parametrically either through fixed-effects or random-effects Poisson models. The context of the study is a randomized controlled trial with two groups (treatment and control). Our nonparametric approach uses several modeling formulations based on Dirichlet process priors. We find that the nonparametric models are able to flexibly adapt to the data, to offer rich posterior inference, and to provide, in a variety of settings, more accurate predictive inference than parametric models.     

An integrated biodesulfurization process,including inoculum preparation,desulfurization and sulfate removal in a single step,for removing sulfur from oils

BACKGROUND: A single‐stage reactor, in which the growth of bacterial culture, induction of desulfurizing enzymes, and desulfurization reaction are carried out in a single step, was adopted to investigate desulfurization of dibenzothiophene (DBT) at high cell densities. Rhodococcus erythropolis, IGTS8 was used as the biocatalyst. Optimal conditions for bacterial growth and DBT desulfurization were investigated. RESULTS: Optimization of fermentation conditions was necessary to obtain high cell densities including controlling accumulation of acetate. Under optimal operating conditions, the maximum optical density at 600 nm (OD₆₀₀) was measured to be 26.6 at 118 h of cultivation. When biodesulfurization of DBT in model oil with a high cell density culture of IGTS8 was investigated, accumulation of sulfate was found to limit the extent of desulfurization. A sulfate removal step was added to obtain a single‐stage integrated biodesulfurization process. Sulfate removal was achieved via an aqueous bleed stream and use of a separation unit to recycle the organic phase. CONCLUSION: A proof of principle of a complete system capable of biocatalyst growth, induction, desulfurization and by‐product separation was demonstrated. This system enables simplification of the biodesulfurization process and has potential to lower the operating cost of the bioprocess. Copyright © 2008 Society of Chemical Industry     

改进工艺操作方法 降低脱硅锆能耗

从分析脱硅的条件出发,引导出新的工艺操作方法、工艺参数和加料方法。用一年的生产实践说明该新工艺操作方法的技术经济效益。     

对我国催化重整工艺专利市场的思考

根据我国专利法的原则，在对我国催化重整和芳烃生产专利检索过程和结果进行分析的基础上，阐述了对目前我国催化重整工艺专利市场的几点看法并提出对策。