EDTA在尿素换热设备清洗中的应用

草酸法清洗换热设备垢层时对设备腐蚀严重。EDTA能与积垢中的铁离子反应生成溶于水的络合离子,达到清洗积垢的目的,对设备腐蚀程度也小,通过EDTA、Fe含量的变化可判断清洗程度。     

Preferential adsorption coefficient of polymers

The recent formulation of the preferential adsorption coefficient, λ, which takes into account differences in molecular contact surface and in free volume, is tested by comparing theoretical with experimental values of λ from the literature. Seven different systems containing polystyrene and poly(methyl methacrylate) are considered. Agreement between theory and experiment is reached by treating the contact surface of the polymer as a fitting parameters, s. The adjusted values of s are: (a) systematically higher than the ones calculated from chain geometry; (b) largest in systems containing specific interactions (methanol). The connection between this enhanced apparent contact surface of the polymer and the ternary interaction parameter of the classical theory of λ, is analysed.     

Decentralized weighted control for a class of large‐scale systems with multi‐modes

In this paper, the control synthesis problem for a class of large‐scale systems with multi‐modes that are called large‐scale switched systems is addressed. By introducing the concept of decentralized switching signal and the relevant decentralized average dwell time, the asymptotic stability and weighted ?₂ gain performance are investigated. It should be noted that the decentralized switching covers general switching cases for large‐scale switched systems, namely, it admits both time‐dependent switching signal and arbitrary switching signal blended in the decentralized switching. Then, on the basis of the analysis results, the decentralized weighted control scheme including state feedback controller gains and switching signals is studied. Several design algorithms are proposed to meet different controller design problems. Finally, numerical examples are provided to illustrate theoretical findings within this paper. Copyright © 2013 John Wiley & Sons, Ltd.     

Decentralized output feedback stabilization for a class of large‐scale feedforward nonlinear time‐delay systems

This paper is concerned with the decentralized stabilization problem for a class of large‐scale feedforward nonlinear time‐delay systems. The uncertain nonlinearities involved in the systems are assumed to be bounded by continuous functions of the inputs and delayed inputs multiplied by unmeasured states and delayed states. An observer‐based decentralized output feedback control scheme is proposed by using the dynamic gain control design approach. On the basis of the Lyapunov–Krasovskii stability theory, the global asymptotic stability of the closed‐loop control system is proved. Contrary to many existing control designs for feedforward nonlinear systems, the celebrated forwarding design and saturation design are not utilized here. An example is finally given to demonstrate the effectiveness of the proposed design procedure. Copyright © 2013 John Wiley & Sons, Ltd.     

Control policies for an industrial acetylene hydrogenation reactor

This paper addresses the problem of finding optimal operational policies for an acetylene reactor for day to day operation. A lumped parameter model based on four main reactions is developed and used to examine the effects of the reactor manipulated variables on key reaction parameters. An optimal and a sub-optimal operational policy which minimize the ethylene loss over time are formulated and the solution techniques are presented. The results indicate that the reactor model is in good agreement with industrial plant data. The performance of the optimal control policy is very similar to the performance of the sub-optimal control policy. However, the sub-optimal formulation, while retaining the dominant features of the optimal response, reduces the computational requirements. Finally, some issues concerning the real-time implementation of an advanced acetylene reactor control scheme are presented. These include the estimation of the optimum regeneration cycle, a recursive model update algorithm, the process optimizer and their overall coordination. A preliminary analysis of the benefits associated with the advanced control scheme suggests a considerable reduction in the yearly ethylene loss.     

高负荷下聚酯工艺参数的优化

介绍原 2 0万t/a装置增容到 2 4万t/a时的工艺参数优化。PTA平均粒径 95～ 110 μm ,n(EG) /n(PTA) =2 .6～ 2 .7,酯化液位 63 %～ 64 % ,温度 2 92～ 2 96℃ ;乙二醇锑催化剂 ,稳定EG、DEG量 ,选择TiO2 消光剂 ,滤除凝聚粒子 ;预缩聚温度 2 87～ 2 89℃ ,压力 2 .4～ 2 .8kPa,液位 42～ 48cm ;终缩聚温度 2 90～ 2 91℃ ,压力 2 .5～ 3 .0hPa,液位 60～ 62cm ,搅拌速度 2 .7r/min。     

危险传染病应急诊疗病房通风管道的优化设计

针对危险传染病的应急诊疗,研制出移动式危险传染病应急诊疗病房,为降低危险传染病应急诊疗病房的整体质量及棚顶的压力,以通风口的质量最轻为目标函数,以各个进气支路的进气量相等为约束条件,结合沿程阻力损失系数与管路横截面边长的关系式推导出通风管道约束函数关系式,利用MATLAB优化工具箱对模型求解,优化得到通风管道的最佳尺寸.根据优化设计结果设计了通风管道,满足实际使用要求.     

悬挂式重力补偿系统精密跟踪方法

介绍了一种用于研究空间机器人微重力条件下的工作特性的悬挂系统——悬挂式重力补偿系统,并给出了悬挂模块的动力学模型.通过数值求解与仿真,运用非线性规化求出了一定条件下的最优控制参数;用正交试验寻优、基于时间最优控制的试凑法证明了优化模型的解正确性.该研究为空间机器人地面试验系统模拟微重力环境下精密跟踪运动提供了最优控制方法.     

制造任务分解与制造单元级资源配置协同优化

针对网络化制造环境下制造任务分解与资源配置脱节的问题,提出了制造任务逐层分解与制造单元级资源配置协同优化的方法,建立了协同优化流程.在对制造任务特点进行分析的基础上,建立了制造任务模型和制造单元资源模型,建立了多目标优化模型和目标的综合评价体系,利用在遗传算法求解搜索过程中所获得的动态信息进行综合评价,并随着求解搜索过程的深入对变异幅度进行调整,以达到全局优化和加快收敛速度的目的.最后以实例验证了该方法的可行性与有效性.     

桁架结构形状优化的粒子群优化算法

为解决有应力约束、几何约束以及局部稳定性约束的桁架结构的形状优化设计,将粒子群优化(PSO)算法应用于桁架结构的形状优化设计.首先详细介绍了原始PSO算法的基本原理,然后引入压缩因子改进了原始的PSO算法,并提出了合理的参数设置值.优化计算过程中,综合考虑了节点坐标和截面面积等两类不同性质的设计变量.最后对几个经典问题进行了求解,并与传统的优化算法进行了比较.数值结果表明,改进的PSO算法具有良好的收敛性和稳定性,可以有效地进行桁架结构的形状优化设计.