基于CPSO-BP神经网络的风电并网暂态电压稳定评估

针对目前传统方法难以快速、准确判断风电并网后系统暂态电压稳定性的问题,提出了一种基于CPSO-BP组合的风电并网暂态电压稳定评估方法。首先采用混沌理论对粒子群算法的不足进行改善,应用改进后的算法对神经网络的初始权值和阈值进行优化,然后利用系统故障前后采集的传统物理量和风电场相关的物理量作为BP神经网络输入特征量进行监督学习,最后将训练得到的模型应用于风电并网系统的暂态电压稳定评估中。利用英格兰10机39节点系统标准算例进行风电并网仿真分析,结果证明了所提方法的有效性。     

Method for discrimination of false targets in multistation radar systems based on the deep neural network

For the existing jamming discrimination methods for multistation radar systems,only the single feature of target echo space correlation is utilized as the metric,which leads to insufficient comprehensiveness of feature extraction,so that effectiveness and universality are insufficient for the discrimination algorithm.In this paper,an identification method in multistatic radar systems based on the deep neural network is proposed.This method combines the characteristics of multistatic radar systems cooperative detection technology,which has many available resources and strong scheduling ability in space,time and frequency domain,with the strong model learning and feature representation ability in the process of information processing on the deep neural network,so that it can effectively apply to the field of anti-deception jamming.Full use is made of unknown information about echo data to obtain more multi-dimensional,more comprehensive,more complete and deeper feature differences besides correlation,so as to achieve a better jamming discrimination effect.Simulation results show that the proposed method can effectively reduce the influence of noise and pulse number on the jamming discrimination performance.At the same time,the limitation of the target echo correlation coefficient on anti-jamming technology under nonideal conditions is alleviated,which broadens the boundary conditions of the application process.     

一种联合采样的神经网络光场

相比传统的光场绘制技术,神经网络光场(NeRF)方法可使用神经网络拟合场景的光线采样,将隐式编码输入图片的光场,合成新视图. 针对NeRF方法训练时间长,绘制视图慢的问题,提出了一种基于联合采样的NeRF方法,通过使粗糙网络和细腻网络共享均匀采样结果的方法,减少了不必要的光线采样,从而加快了网络训练和视图合成的速度. 实验结果表明,在取得近似视图合成质量的情况下,与NeRF方法相比,所提方法的训练时间减少了20%,视图合成的效率提高了25%.     

强度传输方程和神经网络融合的三维重构算法

针对原有强度传输方程法所恢复的相位精度不够精确的缺点,提出强度传输方程和神经网络融合的三维重构算法. 利用强度传输方程求解出物体不同角度的初始相位,利用神经网络算法进行优化,根据不同角度的最终恢复相位结合乘法技术重构出三维体信息. 该算法具有精度高的特点,可以为三维成像技术的应用提供参考. 对于实验中的示例图像,该算法将强度传输方程得到的相位误差从21.40%降低为5.26%,重构三维物体与模拟真实物体的相关程度为显著相关.     

基于改进YOLOv3的运动目标分类检测算法研究

提出一种基于改进YOLOv3算法的一类运动目标检测算法. 为进一步提高YOLOv3的检测精度,采用基于DIoU优化的边界框回归损失函数进行计算; 优化非极大值抑制,有效减少了目标框重叠的现象,提高检测精度; 针对运动目标检测,提出一种基于目标框多中心点位移的检测算法. 经UA-DETRAC数据集上的实验表明,改进后的算法在提高检测精度的同时保证了较快的速度,准确率和召回率相比原始YOLOv3分别提高了 8.07%和3.87%,对运动目标的检测速度可达20 fps/s,可满足实时检测的要求.     

基于Rough集的磨削参数决策系统

本文介绍了5层模糊神经网络的优缺点，提出了基于Rough集构造模糊神经网络的方法，并应用于多传感器的磨削参数决策系统，达到控制磨削加工质量的目的。     

虚拟环境下机床主传动系统故障诊断的仿真实现

本文介绍了用AutoCAD完成机床主传动系统三维实体造型，用VisualC 、Visual LISP等工具完成主轴箱轴承、齿轮、轴等部位在运行中出现故障时的立体动画。经压电晶体加速度传感器实时检测机床的振动信号，对这些信号进行分析(统计处理、频谱分析等)提取出故障特征，经人工神经网络、模糊决策及专家系统等手段进行决策，判定故障部位和程度，可在微机上直观地观察主轴箱在运行过程中，各故障具体部位及损伤程度的虚拟现实情况。     

Neural network-based control for the fiber placement composite manufacturing process

At McDonnell Douglas Aerospace (MDA), an artificial neural network-based control system has been developed and implemented to control laser heating for the fiber placement composite manufacturing process. This neurocontroller learns the inverse model of the process on-line to provide performance that improves with experience and exceeds that of conventional feedback control techniques. When untrained, the control system behaves as a proportional-integral (PI) controller. However, after learning from experience, the neural network feedforward control module provides control signals that greatly improve temperature tracking performance. Faster convergence to new temperature set points and reduced temperature deviation due to changing feed rate have been demonstrated on the machine. A cerebellar model articulation controller (CMAC) network is used for inverse modeling because of its rapid learning performance. This control system is implemented in an IBM-compatible 386 PC with an A/D board interface to the machine. Work supported by the McDonnell Douglas Independent Research and Development Program Export Authority: 22CFR 125.4(b)(13)     

不平衡数据下基于PSO-BP算法的输电线路弧垂预测

针对架空输电线路弧垂在计算过程中易受测量数据(温度、风速、档距等参数)影响的问题,提出了基于数据预处理的PSO-BP神经网络弧垂预测模型.对收集数据中部分样本缺失的情况,使用合成少数过采样技术(SMOTE)对不平衡样本进行合成;构建PSO-BP神经网络用于弧垂预测,使用不同工况条件的数据训练网络,实现弧垂预测的目的,并将网络的性能与传统的BP神经网络性能进行对比.实验结果表明,与传统BP神经网络模型相比,本文提出的模型进行弧垂值预测后所得的误差绝对值显著降低.本文提出的模型可以加快训练速度、提高预测精度.