Nanoweb Formation: 2D Self‐Assembly of Semiconductor Gallium Oxide Nanowires/Nanotubes

This paper reports a method to produce networks of crystalline gallium oxide comprised of one‐dimensional (1D) nanostructures. Because of the unique arrangement of wires, these crystalline networks are termed as ‘nanowebs’. Nanowebs are of great technological interest since they contain wire densities of the order of 10⁹ cm^–2. A possible mechanism for the fast self‐assembly of crystalline metal oxide nanowires involves multiple nucleation and coalescence via oxidation–reduction reactions at the molecular level. The preferential growth of nanowires parallel to the substrate enabled them to coalesce into regular polygonal networks. The individual segments of the polygonal network consist of both nanowires and nanotubules of β‐gallium oxide. Individual wire properties contribute to a nanoweb’s overall capacity and the implications for devices based on nanowebs are expected to be enormous.     

Positively Thermo‐Sensitive Monodisperse Core–Shell Microspheres

In this paper, we report on a novel family of monodisperse thermo‐sensitive core–shell hydrogel microspheres that is featured with high monodispersity and positively thermo‐responsive volume phase transition characteristics with tunable swelling kinetics, i.e., the particle swelling is induced by an increase rather than a decrease in temperature. The microspheres were fabricated in a three‐step process. In the first step, monodisperse poly(acrylamide‐co‐styrene) seeds were prepared by emulsifier‐free emulsion polymerization. In the second step, poly(acrylamide) or poly[acrylamide‐co‐(butyl methacrylate)] shells were fabricated on the microsphere seeds by free radical polymerization. In the third step, the core–shell microspheres with poly‐ (acrylamide)/poly(acrylic acid) based interpenetrating polymer network (IPN) shells were finished by a method of sequential IPN synthesis. The proposed monodisperse core–shell microspheres provide a new mode of the phase transition behavior for thermo‐sensitive “smart” or “intelligent” monodisperse micro‐actuators that is highly attractive for targeting drug delivery systems, chemical separations, sensors, and so on.     

Copolymerization of bromophenylmaleimide with ethyl or butyl methacrylate

N‐p‐Bromophenylmaleimide (BrPMI) does not polymerize in solution by conventional free radical mechanism. However, it readily polymerized in bulk when mixed with a free radical initiator and heated in a microwave oven for 7–8 min. Copolymerization of ethyl methacrylate or butyl methacrylate with BrPMI was conducted in dioxane. The copolymers were characterized by IR and ¹H NMR spectroscopy and gel permeation chromatography. The monomer reactivity ratios were calculated by a non‐linear least‐square analysis. Thermal analysis indicated a great improvement in thermal stability of the copolymers compared with the methacrylate homopolymers. BrPMI was also polymerized in bulk in the DSC pan, which allowed the calculation of the activation energy of its polymerization. Copyright © 2003 Society of Chemical Industry     

Possibilities and extension of XRD material response analysis in failure research for the advanced evaluation of the damage level of Hertzian loaded components

Due to clearly distinguishable damage symptoms, it is differentiated between the surface and sub‐surface failure mode of rolling bearings. Material states red out by X‐ray diffraction (XRD) residual stress measurements point to a variety of loading conditions especially at raceway surfaces that are associated with several competing failure mechanisms. The corresponding lifetime reduction can range from the lower fatigue strength region to material ratcheting in extreme cases. Relevant position of the microstructural changes and nature of the failure mechanisms are characterized. The time alteration of the XRD material parameters measured at or near the surface and at the depth of the maximum equivalent stress correlates, in a different manner, with the statistical parameter of the 10 % bearing life. Both failure modes are illustrated by concrete examples. Contaminated lubricant and boundary lubrication, which represent practically important surface‐induced failures, are discussed in more detail. Gray staining, i.e. shallow pitting, often occurs without distinct indication of global material aging by means of XRD characteristics. Here, scanning electron microscopy observations and electron microprobe analyses point to corrosion fatigue as acting surface failure mechanism. The interaction between material and lubricant under complex loading regimes particularly of mixed friction and corrosion opens further failure research areas in the field of tribology.     

Stability of formal thought disorder and referential communication disturbances in schizophrenia.

This study examined the degree to which different types of communication disturbances in the speech of 48 schizophrenia patients and 28 controls were variable and state related versus stable and traitlike. Clinically rated formal thought disorder and 5 types of referential disturbance showed substantial stability within participants over time. The sixth type of referential disturbance, the vague reference, was not stable over time. Formal thought disorder was associated with the severity of core psychotic symptoms in patients, whereas referential disturbances showed little or no association with positive or negative symptom severity. Furthermore, changes in psychotic symptoms over time were accompanied by corresponding changes in formal thought disorder but not referential disturbances. These results support the idea that some types of referential disturbances are traitlike and may be reflective of vulnerability as well as manifest illness. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

二烷基硫代磷酸铵的捕收性能

本文研究了二烷基硫代磷酸铵（ＲＯ）２ＰＳＯＮＨ４（Ｒ＝乙基、丁基、己基、烯丙烯）系列捕收剂对非硫化矿孔雀石、锡石、赤铁矿、白铅矿、方解石和菱锌矿的浮选性能，并就药剂结构与性能关系进行了分析讨论．     

Multi‐layered flat‐surface micro‐optical components directly molded on an LCD panel

Abstract— We have developed a process to fabricate optical components, such as a lens, prism, or diffuser, directly on to a glass substrate. Processes include precision mastering by diamond cutting and multi‐layer photopolymer (2P) molding to realize flat surfaces and the integration of multiple components with an alignment within a few micrometers.