Straightforward modeling of dynamic I–V characteristics for microwave FETs

This work presents a straightforward approach aimed at modeling the dynamic I–V characteristics of microwave active solid‐state devices. The drain‐source current generator represents the most significant source of nonlinearity in a transistor and, therefore, its correct modeling is fundamental to predict accurately the current and voltage waveforms under large‐signal operation. The proposed approach relies on using a small set of low‐frequency time‐domain waveform measurements combined with numerical optimization‐based estimation of the nonlinear model parameters. The procedure is applied to a gallium nitride HEMT and silicon FinFET. The effectiveness of the modeling procedure in terms of prediction accuracy and generalization capability is demonstrated by validation of the extracted models under operating conditions different than the ones used for the parameters estimation. Good agreement between measurements and model simulations is achieved for both technologies and in both low‐ and high‐frequency range. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:109–116, 2014.     

集成电路密封用高纯邻甲酚醛环氧树脂的制备

ECN树脂中的可水解氯含量是决定树脂质量的—个重要指标。本文研究了反应温度、ECH/OCN配比、反应时间和碱用量等因素的影响,取得了规律性的认识,并获得最佳配方,制备出高纯度的ECN树脂系列产品。     

基于GP2Y0A02距离测量的仿真与辅助设计

为了实现非接触距离测量,利用多个仿真与设计软件设计了采用GP2Y0A02模块的距离光学测试系统。在PROTEUS中测量GP2Y0A02电压值,并在Matlab中采用多元线性回归建立GP2Y0A02电压与距离的拟合曲线,最后在开发的测量程序中利用拟合曲线求解得到距离量。测试结果表明,对于非线性位置测量采用适当数据处理方法能得到满意的测量精度。     

An Adaptive and Optimized Switching Observer for Sensorless Control of an Electromagnetic Valve Actuator in Camless Internal Combustion Engines

In this paper, the design and operation of a special electromagnetic actuator as a variable engine valve actuator are presented. Further, this paper describes a feasible approximated velocity switching estimator based on measurements of current and input voltage to achieve sensorless control. The proposed concept allows a reduced‐order observer to be conceived and yields a specific control strategy with an acceptable performance. In general, this approach represents a viable strategy to build reduced‐order observers for estimating the velocity of systems through the measurement of input current and voltage. The robustness of the velocity tracking is explored using a minimum variance approach. The effect of the noise is minimized, and the position can be achieved through an adaptive and optimized structure by combining this particular velocity estimator and an observer based on the electromechanical system. Position control is achieved through an inversion of the model. This approach avoids a more complex structure for the observer and yields an acceptable performance as well as eliminating bulky position‐sensor systems. In addition, a control strategy is presented and discussed. Computer simulations of the sensorless control structure are presented in which the positive effects of the observer with optimized parameter setting are visible in the closed‐loop control.     

基于矩阵初等变换的量子可逆逻辑电路双向综合算法

基于矩阵初等变换,提出了量子可逆逻辑电路双向综合算法。该算法依据两数字间的汉明距离,通过交换矩阵行号或矩阵元素对量子可逆逻辑电路的矩阵进行初等行变换。在变换的过程中,利用邻接矩阵的电路转化规则,生成任意给定置换的量子可逆逻辑电路。与其它同类算法相比,由于不需要穷尽搜索,该算法的时空复杂度有大幅降低;又由于采用任意n量子扩展通用Toffoli门,该算法可综合任一置换(奇或偶置换)的量子可逆逻辑电路,并且电路中门的数量有所减少。     

远端串扰下永磁探测电路相位鉴频特性测量

压电式永磁探测电路广泛应用在远程目标探测系统中,其在远端串扰下的相位鉴频特性准确分析可提高探测系统的测量精度。传统方法采用红外和声脉冲等探测进行电路相位鉴频特性测量控制,在强磁场中曲线趋于饱和,测量性能不好。提出一种基于引入正弦脉宽调制控制的端串扰下压电式永磁探测电路相位鉴频特性测量方法,并进行系统设计,首先进行压电式永磁探测电路系统设计,采用自适应噪声抵消方式处理远端串扰的干扰,设计远端串扰下压电式永磁探测电路,通过相位鉴频特性测量分析,实现电路的混频、倍频等频率变换,完成远端串扰下电式永磁电路的相位鉴频特性测量控制。系统测试结果表明,该测量方法和系统具有较好的远端串扰抵消性能,准确分析电路系统的相位鉴频特性,远程目标探测准确率提高,性能优越。为远程目标探测系统设计提供了硬件电路系统设计基础。     

基于非线性关联维特征提取的机械自动化监测系统

提取天然气压缩机故障状态下振动信号的故障特征是设计机械自动化检测系统的核心技术。提出一种基于非线性关联维特征提取的机械自动化监测系统设计方法,在故障诊断原理基础上,进行故障振动信号时间序列分析,设计故障振动信号相空间重构方法,改进了相空间重构最佳时延和嵌入维数参数计算的关键技术,通过提取关联维故障特征,在Simulink平台上设计了自动化监测系统。系统实验结果表明,该算法和系统能使各类故障状态下提取的关联维特征的标准差显著性降低,特征分布聚类能力明显提高,系统能有效检测各类故障,实现了机械设备的自动化监测,在自动化故障诊断仪表设计等领域具有较好的工程实践价值。     

基于粒子群算法的轨道电路补偿电容故障诊断方法

为了延长轨道电路传输距离,改善传输效果。本文提出一种机车信号感应电压幅值包络仿真模型,它是基于均匀传输线理论,通过补偿电容对机车信号感应电压幅值包络的影响规律,使用改进粒子群算法得到当前状态下补偿电容的最优值,进而对补偿电容的故障进行诊断。仿真结果表明,这种诊断方法是可行和有效的,能快速准确地定位故障补偿电容,替补偿电容的故障诊断提供了新的有效手段。     

Viscoelastic and Processing Effects on the Fiber-Matrix Interphase Strength. Part I. The Effects of Loading Rate, Test Temperature, Fiber Sizing and Global Strain Level

The effects of loading rate, fiber sizing, test temperature and global strain level on the adhesion strength between carbon fibers and a thermosetting epoxy (Epon 815) are studied using the single fiber fragmentation test procedure. Analytical methodology describing the viscoelastic behavior observed is also presented. The possibility of rate-temperature-interphase thickness superposition for the interfacial strength function is illustrated based on the analytical models discussed. Experimental data are discussed using Weibull statistics and also presented in the form of percent relative frequency histograms for the fiber fragments in a collective fashion. The use of histograms allows for interpretation of the skewness in the data population.