试验温度和停放时间对胶料加工性能的影响

研究试验温度和停放时间对胶料加工性能的影响。结果表明，试验温度对胶料的门尼粘度、门尼焦烧时间和硫化特性均有一定影响。门尼粘度测定的试验温度选择100℃；门尼焦烧时间测定的试验温度一般选120℃，SBR胶料可提高至130℃左右，以缩短试验时间；硫化特性测定的试验温度一般选185℃。试验前模腔达到规定温度后再保持15min，以使转子与模腔温度一致。胶料停放时间应控制在2h左右。     

The chemical feeding ecology ofNeodiprion dubiosus schedl,N. rugifrons midd., andN. lecontei (Fitch) on jack pine (Pinus banksiana lamb.)

Two monophagous sawflies,Neodiprion dubiosus andN. rugifrons, actively avoid feeding on the current season's needles of jack pine,Pinus banksiana, while the polyphagousN. lecontei feeds indiscriminately on foliage of all age classes. Bioassay studies with needle extracts indicate thatN. dubiosus andN. rugifrons larval feeding preference is governed by a group of tricyclic diterpene resin acids. Resin acids commonly occur in needles of all ages; however, levopimaric, palustric, dehydroabietic, and neoabietic acids were at higher concentrations in the new needles.N. dubiosus was significantly deterred from feeding on 1-year-old foliage when treated with the pure resin acids, palustric and levopimaric, at 0.5 and 1.0 mg/ml MeOH.N. rugifrons larvae were deterred from feeding by pure dehydroabietic, neoabietic, and palustric acids at 1.0 mg/ml MeOH.     

油水乳化液流变性研究进展

综述了油水乳化液流变性研究进展，介绍了目前国内外乳化液流变性的研究情况、乳化液的流变模式及乳化液流变性的评价方法。乳化液的剪切应力-剪切速率关系明显受油滴尺寸的影响，在含油量一定时，表观黏度随油滴尺寸的减小而增加。绝大多数乳化液在低剪切速度下(低于50s^-1)，呈现剪切变稀行为；在剪切速率超过1000s^-1时呈现牛顿行为。高含水原油的视黏度是温度、含水率以及剪切速率的函数。介绍了乳化液的3种流变模式，并给出了流变性评价方法实例。提出了油水乳化液流变性研究的发展方向。     

Defining a synthetic pheromone blend attractive to male Heliothis subflexa under wind tunnel conditions

Heliothis subflexa males were flown in a wind tunnel to a variety of combinations of synthetic pheromone components admixed on a filter paper disk. Blends containing (Z)-11-hexadecenal (Z11–16:Ald, 1000 ng), (Z)-9-hexadecenal (Z9–16:Ald, 500 ng) and (Z)-11-hexadecenol (Z11–16:OH, 10–500 ng) elicited upwind flight and source contact in 52–69% of males. All these compounds have previously been isolated and identified from female H. subflexa gland extracts and volatile pheromone emissions. Males were not attracted by blends in which Z9–16:Ald was omitted (0% source contact). Similarly, blends lacking Z11–16:OH were unattractive to male H. subflexa (3% or less source contact). Males were extremely sensitive to the presence of Z11–16:OH; however, responding in high numbers (57–69% source contact) to blends containing a dosage of 1% (10 ng) or greater Z11–16:OH. Males were unresponsive to blends in which Z9–16:Ald was replaced with a variety of dosages of (Z)-9-tetradecenal, a secondary component of a closely-related congeneric species, Heliothis virescens. Another compound present in the blend emitted by conspecific females, (Z)-11-hexadecenyl acetate (Z11–16:Ac), did not inhibit H. subflexa males (69% source contact) when added to the three-component mixture (1:0.5:0.1) at a ratio of 0.1 (100 ng) with respect to Z11–16:Ald. These results indicate that Z9–16:Ald and Z11–16:OH are required in addition to Z11–16:Ald to elicit significant levels of upwind flight in H. subflexa males. The effects of Z11–16:Ac are more subtle, but at the dosage tested in these experiments, this compound does not have an antagonistic effect on upwind flight and source location by H. subflexa males.     

梁端翼缘扩大型梁柱节点抗震性能和设计方法

为使钢框架梁柱节点满足强柱弱梁的抗震设计原则,并使梁上塑性铰远离梁柱节点区,对梁端翼缘扩大型(包括侧板加强型和翼缘端部放大型)钢框架梁柱节点进行了往复荷载下的试验研究,得到了节点类型和梁端翼缘扩大尺寸对节点滞回性能、延性和耗能能力等指标的影响规律.在使用非线性有限元程序对试验结果进行数值模拟的基础上,研究了梁端翼缘扩大段的长度及宽度等参数对节点性能的影响规律和有效取值范围,给出了实用设计方法.使用梁端翼缘扩大型钢框架节点可以有效实现梁端塑性铰外移,是一种在抗震设计中值得推广的具有良好延性和塑性转动能力的新型节点形式.     

型钢翼缘狗骨式削弱在型钢混凝土节点的作用

为了防止地震时型钢混凝土节点核心区发生剪切破坏以及梁柱连接焊缝发生脆性断裂,提出对型钢混凝土节点核心区附近梁端型钢的上、下翼缘采取狗骨式削弱,并系统研究翼缘削弱对提高型钢混凝土节点抗震性能的作用.研究表明,由于在梁端型钢翼缘采取狗骨式削弱,不仅能够将塑性铰控制在梁型钢削弱的位置,从而有效地降低了节点核心区所受的剪力以及梁柱连接焊缝的应力;而且能够改善节点塑性铰区的转动能力和抗剪性能,提高节点的延性和耗能能力.     

网络媒介影响下建筑相关问题初探

自工业革命以来形成的社会生活方式,在信息数字技术的影响下发生着悄无声息的变化.从原子到比特,数字化生存是必然的趋势.网络媒介的出现使得人们在交流和机会等方面获得平等的权利.随之产生的人们的生活方式、行为的改变已经为艺术领域带来了新的变化.通过对艺术创作的考察,为建筑领域的相关问题提供了参照、借鉴.在建筑创作中,＂图＂与＂底＂的关系正在模糊化,信息交流方式更多样化并具有一定的阶段性,动态的模数将导致更具个性化的设计,空间界面更为柔化,设计成果的生成也具有了更多的不可预见性.     

Characterization of chemicals mediating ovipositional host-plant finding byAmyelois transitella females

Ovipositional host-finding in the navel orangeworm,Amyelois transitella (Walker), is brought about by an in-flight response to host odors. Wind-tunnel studies of the response of gravid females to almonds showed that this response is mediated primarily by long-chain fatty acids, particularly oleic acid and linoleic acid. Evidence for the behavioral activity of fatty acids is based on the fact that: (1) behavioral activity of almond oil was concentrated in a single liquid chromatographic fraction whose composition was predominantly long-chain fatty acids, (2) behavioral activity was lost when either almond oil or the active fraction of that oil was treated with diazomethane, (3) full activity was elicited by a selective extraction of free fatty acids from crude almond oil, and (4) upwind response by females was elicited by a blend of synthetic oleic and linoleic acids, albeit at a level less than that elicited by almond oil. Five fatty acids identified from the almond oil were: myristic acid (1%), palmitic acid (16%), stearic acid (3%), oleic acid (58%), and linoleic (22%). Attraction to various combinations of synthetic acids was observed only when oleic acid was present, and oleic acid elicited upwind flights to the source when presented alone; however, short-range responses were enhanced by the addition of linoleic acid, which elicited no long-range orientation by itself. Despite significant levels of attraction to synthetic blends, the percentage of females flying to the source was lower than that flying to acidulated almond oil, the best natural attractant tested. Thus, although longrange response may be mediated primarily by a blend of oleic and linoleic acids, additional and as yet unidentified components must also play an important role. Long-range chemically modulated host finding in this and other generalist plant feeders is discussed with respect to current models of the evolution of host finding, and it is argued that suggestions that long-range host finding should be correlated with narrowness of host utilization are logically flawed and are not supported by our current understanding of specific examples of host finding.     

频率响应法研究噻吩在CeY分子筛上的吸附行为

以NaY、液相Ce离子交换改性的Y型分子筛(L-CeY)为研究对象,运用N2吸附、XRD、NH3-TPD和Py-FTIR等实验方法表征两种Y型分子筛的物化性能。采用频率响应技术(FR)和智能重量分析仪(IGA)研究噻吩在两种分子筛上的吸附行为,并考察噻吩在稀土离子改性Y型分子筛上的不同吸附作用模式。结果表明,频率响应技术能够有效识别分子筛孔道内发生的不同传质过程。噻吩在NaY分子筛上的吸附行为较为简单,存在孔道吸附和π电子相互作用两种吸附过程;而在L-CeY分子筛上吸附行为较为复杂,同时存在孔道吸附和"S-M"吸附等多种吸附过程,另外,在高温条件下,还存在复杂的催化反应过程。     

Accelerated electrospark deposition and the wear behavior of coatings

Electrospark deposition (ESD) is a coating process that is featured by low heat input to the substrate. Low coating efficiency and other limitations influence its wider application. The present paper introduces newly designed ESD equipment, by which a higher coating rate can be reached. The relationship among coating thickness, surface roughness, and process parameters such as pulse energy, pulse frequency, and deposition time are presented. Electrospark deposition coating by the new equipment on AISI 1045 steel (with WC-8% Co as electrode) increases the wear resistance by 5 to 8 times. The micromechanism is investigated by scanning electron microscopy observation.