智能化劳厄定向法

提出了晶体劳厄定向的智能化方法；简述了有关的Ｘ射线衍射理论、数学模型和运行步骤；讨论了该方法的可靠性和实用性．     

An algebraic method for processing colored images

An 8-valued commutative ring is developed to process colored images. Algebraic operators are defined to perform a number of operations such as the extraction of the primary colors and contours of different colors.     

An implementation for a fast public-key cryptosystem

In this paper we examine the development of a high-speed implementation of a system to perform exponentiation in fields of the form GF(2 ⁿ ). For sufficiently large n, this device has applications in public-key cryptography. The selection of representation and observations on the structure of multiplication have led to the development of an architecture which is of low complexity and high speed. A VLSI implementation has being fabricated with measured throughput for exponentiation for cryptographic purposes of approximately 300 kilobits per second.     

��Ȼ����Һ���÷����̽

求文针对我国天然气凝液如何利用问题,结合新技术进展,进行了初步探讨,认为原料较多的场合,应以催化脱氢或芳构化作为当前的主要加工方向。对原料较少的场合,也提出一些看法。     

Internal drift effects on the diffusion of Ag in CdTe

Anomalous diffusion profiles of Ag in single crystalline CdTe were observed using the radiotracer ¹¹¹Ag. The diffusion anneals were performed at 800 K under Cd or Te vapor and in vacuum with low Ag concentrations. The measured Ag profiles directly reflect the distribution of the self-interstitials and vacancies of the Cd sublattice and are the result of chemical self-diffusion which describes the variation of the deviation from stoichiometry of the binary crystal as a function of depth and time. It turned out that the spread of the Ag dopant essentially is determined by the drift of the charged defects within the electric field caused by the distribution of the extrinsic and intrinsic defects.     

3DFD Simulation of Asymmetric Wave Field by Side-wall Acoustic Tool in Open and Cased Wells

1. Introduction Side-wall acoustic logging tools, such as the Segmented Bond Tool (SBT) from Baker Atlas and the tools for open hole measurements, utilize acoustic transducers mounted on six pads to make compensated acoustic velocity and attenuation measurements which are not affected by mud weight, gas cut, fast formation effects, casing surface conditions or reasonable tool de- centralizing. Studies on the wave fields generated by these tools are very important to tool design and data int…     

Evidence of thermally induced borehole elongation: a case study at Soultz, France

When they occur, borehole breakouts are considered strong markers of principal stress directions at depth. An innovative processing method for automatically identifying breakouts from ultrasonic borehole wall images has been developed. It has been applied to data sets from two deep, sub-vertical wells (GPK1 and GPK2) at the Soultz geothermal site in eastern France. In well GPK1, below 3 km depth, compression breakouts, with a 95°±7° azimuth, increasingly occur with depth. They result from time dependent compression failure at sub-critical stress levels and are indicators of the minimum horizontal principal stress orientation. However, in the uppermost logged section of well GPK2 (1.6–2.9 km depth), continuous borehole elongations share roughly the same azimuth with so called drilling-induced fractures (164°±18° and 175°±17° azimuth, respectively). Both features concomitantly vanish with depth, together with the amplitude of the thermal perturbation induced by drilling. It is proposed that these latter borehole elongations result from a pervasive, cooling-induced, tensile micro-cracking process prior to macroscopic failure localization. They are termed thermal elongations and are indicators of the maximum horizontal principal stress orientation. Had a simple logging caliper tool been used for this work, these thermal elongations might have been confused with classical compression breakouts. A simple criterion for differentiating compression breakouts from thermal elongation is proposed.     

Role of Specimen Geometry in the Effect of Fiber Orientation on the Thermal Conductivity of a Uniaxial Carbon-Fiber-Reinforced Aluminoborosilicate Glass-Matrix Composite

A study concerning the effect of fiber orientation on the thermal conductivity of a uniaxial carbon-fiber-reinforced borosilicate glass was conducted. For thin specimens, and thick specimens with specimen sides cut parallel to the fiber direction, the dependence of thermal conductivity on fiber orientation showed excellent agreement with theoretical behavior predicted for a composite infinite in extent. In contrast, the thermal conductivity data for rectangular thick specimens fell well below the data for the thin and angled specimens. For fiber orientation of 45° and higher, at which the heat was directed toward the side of the specimen rather than across, the thermal conductivity values showed excellent agreement with theoretical behavior predicted for a finite composite strip with insulated sides.     

A Study of AlN Films Prepared by Arc Ion Plating

Hexagonal AlN films have been obtained by arc ion plating at different negative biases ,X-ray diffraction and scanning electron microscopy results show that AlN films with smooth surfaces and (002) preferred orientation are obtained at low biases ,whereas those with coarse surfaces and (100) preferred orientation are obtained at high biases,The formation mechanism of AlN is analyzed and the experiment results are discussed,The effect of bias on adhesion strength has also been examined.     

Insulating safety analysis of the hot-line sweeping robot

This paper presents a method of calculating the insulating safety distances for hot-line working robots at high voltage when dielectric is adulterated with conducts. Also, finite element method is adopted to calculate the electric field strength to find whether it is beyond the critical. The above methods have been applied to analyze the insulating safety of the robot for hot-line sweeping post insulators in a 220 KV substation. They have also been testified by experimentations.