在道岔缺口超标报警系统中的软件设计

介绍了SED1335的性能及特点，重点阐述了它在道岔缺口超标报警系统中显示字符、汉字、构建友好界面的软件设计方法，提出了编写液晶显示程序的一些优良算法。     

Survey of switching techniques in high-speed networks and their performance

One of the most promising approaches for high speed networks for integrated service applications is fast packet switching, or ATM (asynchronous transfer mode). ATM can be characterized by very high speed transmission links and simple, hard-wired protocols within a network. To match the transmission speed of the network links, and to minimize the overhead due to the processing of network protocols, the switching of cells is done in hardware switching fabrics in ATM networks. A number of designs have been proposed for implementing ATM switches. Although many differences exist among the proposals, the vast majority of them are based on self-routeing multistage interconnection networks. This is because of the desirable features of multi-stage interconnection networks such as self-routeing capability and suitability for VLSI implementation. Existing ATM switch architectures can be classified into two major classes: blocking switches, where blockings of cells may occur within a switch when more than one cell contends for the same internal link, and non-blocking switches, where no internal blocking occurs. A large number of techniques have also been proposed to improve the performance of blocking and non-blocking switches. In this paper, we present an extensive survey of the existing proposals for ATM switch architectures, focusing on their performance issues.     

A high-capacity broadband packet switch architecture based on a multilink approach

Broadband packet networks based on asynchronous transfer mode (ATM) are expected to provide a wide range of services, including motion video, voice, data and image. When these networks become prevalent, some applications such as motion video and high-speed LAN interconnections will place a very large bit rate requirement on the channels. Currently, the physical layer supported by the synchronous optical network (SONET) allows the transmission of up to 2.4 Gbit/s with the OC-48 optical interface. However, it is not feasible for the electronic packet switch to route packets at this rate on a single link. In this paper we present a design of a broadband packet switch that uses multiple links in parallel to realize a high-speed channel. This implementation permits the switch to operate at the lower link rate, which can be at 150 Mbit/s, while having the ability to support a virtual circuit at a higher rate (up to 2.4 Gbit/s). The main contribution of the design is that packet sequence on a channel is still maintained even though packets are allowed to use any of the links belonging to the same channel. Besides allowing the switch to function at a slower rate than the transmission channel rate, the implementation of the multilinks benefits from statistical multiplexing gain. Analytical results show the performance advantages of multilink design with respect to delay, throughput and packet loss probability.     

一种新的带优先权控制的ATM交换结构

本文在Ｋｎｏｃｋｏｕｔ交换结构的基础上，探讨一种新的ＡＴＭ交换结构，使其本身带有优先权控制功能，以适应不同业务对信元丢失率及时延的不同要求。这种结构既能最大限度地有效利用系统资源，又能满足不同用户对业务质量的不同要求，并能降低交换结构复杂度。     

Synthesis and characterization of chitosan/poly(acrylic acid) polyelectrolyte complex

Polyelectrolyte complex based on chitosan and acrylic acid monomer by photoinitiated free‐radical polymerization in the absence of crosslinker showed a large transition in swelling in response to changes in pH of surrounding medium. Their ability to swell arises from polyelectrolyte interactions and molecular structure of the complex. The main properties of interest that related to the molecular structure, swelling volumes, glass transition temperature, and elastic modulus of the complex were investigated. The effect of water content, the only variable in the sample component, played an important role in molecular structure of the complex and as a consequence, the extent of intermolecular linkage, especially amide bonds which in turn governed the degree of swelling of the polyelectrolyte complex in this study. The decreased degree of swelling and higher temperature shift of glass transition temperature was found with increased water content, whereas increased modulus of elasticity of dry complex was found in lower water content of synthesis component. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1025–1035, 2002     

一种新型硫酸亚铁单液法调剖剂

本文提出用尿素作为ｐⅡ调节剂，加快硫酸亚铁单液法调剖剂中亚铁离子在地层温度下的沉淀，增大沉淀率，提高封堵效能。岩芯流动试验结果表明，１５％ＦｅＳＯ４．７ＩＩ ２Ｏ／５％尿素调剖剂体系的封堵能力比不含尿素的体系增大近一倍。     

一种新型半桥不对称PW M控制变换器

介绍了一种适用于DC／DC半桥变换的不对称PWM控制方案，分析了电路的工作原理，给出了150W变换器的仿真波形和实验结论，结果表明，该控制方案能在恒定开关频率下对变换器实现高效率的软开关控制。     

机械式光开关市场定位及需求

简述了传统机械式光开关的现状 ,并从工作原理、结构及加工工艺等方面给出了其性能、零部件外型体积及光学指标 ;分析了传统机械式光开关的市场定位、市场需求以及它在当前光网络中的应用。     

液控式修井井下开关的研制

为实现采油井的无污染作业 ,研制了液控式修井井下开关。这种开关除具备自控式井下开关的所有功能外 ,又增加了液控功能。当油井进行检泵作业时 ,在地层压力较大的情况下井下开关能自动关闭 ,作业完毕关井稳压 ,当阀体上下压力达到平衡时 ,阀体下落 ,开关可自动打开 ;当地层压力较小时 ,井下开关不能自动关闭 ,作业过程中井口会产生溢流 ,这时可通过地面加液压将开关关闭 ,作业完毕再向井内加液压可将开关打开 ,油井即可恢复正常生产。该工具的推广应用不仅降低了采油成本 ,而且对防止油层污染 ,保护环境均具有重大意义。