A feasibility study of a direct-mapping parallel processing method to solve linear equations in load-flow calculation

With the growing size and complexity of power systems, system analysis—such as transients calculation—takes much time. Hence, fast calculation methods are required. Although parallel processing is a hopeful method, there have been difficulties in the parallel solution of linear equations which appear in power-flow calculations by the Newton-Raphson method. This paper aims at the fast calculation of the power-flow problem by means of parallel processing. In order to improve the suitability to the parallel solution of the differential equation in transients calculation, we assume the use of a direct-mapping parallel processing machine to map directly the network of a power system onto a network of processors. Under this assumption, we propose a new parallel-processing-oriented method in which the linear equation is solved by linear iterations between nodes with Aitken acceleration. We simulate the method on three model power systems and compare this Parallel Iterative Method (PIN) with a Parallel Direct Method (PDM) which uses the banded matrix according to the number of operations required. As a result, we can expect that PIM may solve linear equations faster than PDM with m processors, although the PIM might be inferior to the PDM with m × m processors, where m denotes the half-band width of the banded matrix.     

Object-extending class transformations

Reorganisation and evolution of class hierarchies is important for object-oriented system development and has received considerable attention in the literature. The contributions of this paper are: (1) a formal study of a set of extension relations and transformations on class hierarchies; (2) a presentation of a small set of primitive transformations which form a minimal and complete basis for the extension relations; and (3) an analysis of the impact of these transformations at the object level.The study leads to a better understanding of evolution and reuse of object-oriented software and class hierarchies. It also provides a terminology and a means of classification for design reuse. The theory presented in this paper is based on the Demeter data model, which gives a concise mathematical foundation for classes and their inheritance and part-of relationships. Parts of the theory have been implemented in the Demeter System ^TM C++, a CASE tool for object-oriented design and programming.     

Application of Differential Evolution for Irrigation Planning: An Indian Case Study

The present paper demonstrates the applicability of population based search optimization method, namely, Differential Evolution (DE) to a case study of Mahi Bajaj Sagar Project (MBSP), India. Ten different strategies of DE are employed to assess the ability of DE for solving higher dimensional problems as an alternative methodology for irrigation planning. The parameters considered in DE are population size, crossover constant and weighting factor. Linear Programming (LP) is utilized as a comparative approach to assess the ability of DE. Comparison of results of LP and the 10 DE strategies for the given parameters indicated that both the results are comparable even for high dimensional problems. Extensive sensitivity analysis studies, performed for 3,600 combinations of above parameters for the 10 DE strategies suggested that DE/rand-to-best/1/bin strategy is the best strategy giving maximum benefits taking minimum CPU time. It is concluded that DE can be utilized for efficient planning of any irrigation system with suitable modifications.     

压裂斜井时射孔处雁形裂缝产生及干扰分析

在已射孔的斜井压裂过程中，射孔孔眼处会出现一系列的几乎相互平行的雁形裂缝。这些裂缝的延伸、连接受到地层应力及裂缝本身的影响，情况较为复杂，但它们的延伸和连接对压裂的成功与否至关重要。笔者对裂缝模型进行简化，将复变函数理论与位错理论相结合，并且考虑了裂缝表面有流体压力作用且裂缝之间存在相互干扰的情况下，建立了无限大介质中裂尖应力强度因子的数学模型，利用该模型可对雁型裂缝之间的相互干扰进行力学分析。应用数值方法对所建立的数学模型求解，得到裂尖的应力强度因子及转角，来预测裂缝连接情况。该结果可用来指导压裂井的射孔施工。     

X-ray microtomography: Application to microstructure analysis of a cementitious material during leaching process

Leaching of cementitious materials leads to an increase in porosity, which has important consequences on transport and mechanical properties. The present study outlines the characterization of microstructural evolution in a mortar subjected to a chemical attack, by means of a powerful non-intrusive experimental method, namely synchrotron X-ray computed microtomography. This innovative method is used to measure the variation of porosity in a leached mortar. Having described the effects of leaching in mortar (influences on microstructure and on mechanical properties), we present the accelerated leaching process and the microtomographic analysis that have been used to monitor it. We then investigate the capacity of this method to quantify the evolution of porosity during the leaching process. The method is validated by comparison of the results obtained with data available in the literature.     

Perceived risk for influenza in veterans with spinal cord injuries and disorders.

Objective: Guided by the extended parallel process model (EPPM), the objective was to assess control processes dominant in influenza behavior decisions. Design: Cross-sectional survey. Results: Response rate was 31% (n=968). Regarding influenza risk, 59% were in danger control. Those in fear control were more likely to report influenza infection (p=.000). In the nonvaccinated, those in fear control were more likely to indicate not knowing where to get the vaccine (p=.016) and that it was unavailable (p=.027), and those in danger control believed they did not need it (p=.023). Zero critical values were more likely to indicate that no health provider recommended the shot (p=.002). Conclusions: Most perceived efficacy to be stronger than threat related to influenza; according to the EPPM, they are aware of their risk but recognize their ability to avert it. For those in danger control, messages should focus on increasing perceptions of severity and susceptibility to positively affect behavior change. For those in fear control, messages should focus on efficacy only. With a critical value of zero, no threat is induced, and a high-threat/high-efficacy approach should be taken. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

江汉平原印支期以来的盆山耦合关系及下古生界油气响应

利用构造地质学和油气系统理论，以盆地构造-沉积分析技术为手段，研究了印支期以来江汉平原与周缘造山带的耦合关系，探讨了江汉平原的构造演化及其对油气成藏的控制作用。印支期以来江汉平原及周缘经历了挤压、拉张、挤压3次大的构造应力场的转换，使古生代海相碳酸盐岩沉积为主的盆地具有改造盆地的特点；一方面强烈的抬升、剥蚀使早期聚集的油气经历改造和再分配、再聚集过程，另一方面燕山期构造活动使逆冲推覆构造成为该区重要勘探领域。综合分析表明，位于台、盆转换带的宜昌-珂理-簰州区带是目前江汉平原及周缘下古生界油气勘探的有利地区。     

Study on axiomatic rules for building up relationships between requirement and source programs

The purpose of our study is to build up relationships between requirement and source programs with our originally thought-out rules. When other rules to be derived from these original rules are applied to software development, even a single instruction in a programming language could be determined, and the program would satisfy the requirement. More specifically speaking, these rules will turn into a formula or a prototype of software programs. Hence, when the variables in the requirement are placed in the formula, we can get a required program in an automatic way.     

并联机床后置处理器的开发及实验研究

以六自由度6-TPS型并联机床为模型，阐述了机床控制数据的生成原理和流程；以此为基础，规划了后置处理器的功能和整体结构。对若干关键技术进行了研究和探讨，包括基于参数化二进制格式的内部数据传输，基于刀轴矢量的笛卡儿空间粗插补算法，三维和二维刀具半径补偿，刀位文件的预处理以及加工代码的词法和语法检查等。最后介绍了利用本系统进行的切削实验，验证了系统的工程实用性。     

Scheduling in or-parallel Prolog systems: Survey and open problems

Implementation of or-parallel Prolog systems offers a number of interesting scheduling problems. The main issues are the interaction between memory models and scheduling, ordering of multiple solutions, and scheduling of speculative work. The problems occur partly because of the design choices (e.g. the choice of a memory model), and partly because of the desire to maintain observational equivalence between parallel and sequential implementations of Prolog, while achieving high efficiency. In the first part of this paper a common framework for discussing scheduling in or-parallel systems is introduced, and also a collection of issues that must be addressed in such systems is presented. In the second part of the paper we survey a number of solutions to these problems comparing their efficiency whenever possible. We close the survey with a short discussion of open problems.Current association: Carlstedt Elektronik AB