Laser scanning path generation considering photopolymer solidification in micro-stereolithography

It is essential to automate the scanning path generation process to effectively implement the micro-stereolithography. However, a scanning path that is generated based only on a 3D CAD model introduces dimensional inaccuracies. In micro-stereolithography, the photopolymer solidification is affected by fabrication conditions, such as the optical properties (laser power, laser scanning speed, laser scanning pitch focusing condition, etc.) and material properties of the photopolymer. Thus, the photopolymer solidification phenomena must be considered when generating a laser scanning path. In this paper, a scanning path generation algorithm that uses 3D CAD data and considers the photopolymer solidification phenomena is proposed to improve the dimensional accuracy in micro-stereolithography. Multi-line photopolymer solidification experiments were performed for various laser scanning conditions to examine the photopolymer solidification phenomena. From these experiments, linear relations between the solidification length (width) and scanning length (width) were acquired and stored in a database. Subsequently, these data were utilized to compensate the scanning path of the laser beam. In addition, experiments for determining the layer thickness in the z-direction were performed and these results were also used in the scanning path generation algorithm.This research was supported by the Highly Advanced National Project (http://www.most.go.kr), which performs some of the National R&D Program, and sponsored by the Korean Ministry of Science and Technology under the contract project code M10214000116-02B1500-02010.     

On the relationships among latent variables and residuals in PLS path modeling: The formative-reflective scheme

A new approach for the estimation and the validation of a structural equation model with a formative-reflective scheme is presented. The basis of the paper is a proposal for overcoming a potential deficiency of PLS path modeling. In the PLS approach the reflective scheme assumed for the endogenous latent variables (LVs) is inverted; moreover, the model errors are not explicitly taken into account for the estimation of the endogenous LVs. The proposed approach utilizes all the relevant information in the formative manifest variables (MVs) providing solutions which respect the causal structure of the model. The estimation procedure is based on the optimization of the redundancy criterion. The new approach, entitled redundancy analysis approach to path modeling (RA-PM) is compared with both traditional PLS Path Modeling and LISREL methodology, on the basis of real and simulated data.     

束流测量中的工频陷波器

提出了一种应用于电子束曝光机束流测量中的自动跟踪工频陷波器，给出电路结构，基于对其工作原理的分析，介绍了提高陷波器跟踪精度的设计要点及调试方法。     

采集太阳光的照明系统研究

简要介绍了欧美和日本在采集太阳光用于室内照明技术研究的进展及我国在研究开发全自动跟踪太阳的采光装置，攻克聚光、跟踪和传光等关键技术所取得的成果。指出研究全光谱利用，结合采光技术和光伏发电技术，达到代电和发电功能是进一步研究、发展的目标。     

水力自动翻板闸门的瞬心轨迹及其对稳定性的影响

分析了连杆滚轮式水力自动翻板闸门的运动轨迹，并由此得出闸门动、静坐标系间的转换关系．结合翻板闸门的运转机理，探讨了闸门在运行过程中的瞬心轨迹线及其对闸门稳定性的影响．结果表明，通过优化闸门结构可调整“瞬心”的位置，保证闸门运转的稳定性．     

Theoretical Investigation of Time Suboptimal Control of Industrial Manipulators Along Specified Paths

A method for the time suboptimal control of an industrial manipulator from an initial position and orientation to a final position and orientation as it moves along a specified path is proposed. Nonlinear system equations that describe the manipulator motion are linearized at each time step along the path. A method which gives the control inputs (joint angular velocities) for time suboptimal control of the manipulator is developed. In the formulation, joint angular velocity and acceleration limitations are also taken into consideration. A six degree of freedom elbow type manipulator is used in numerical examples to verify the method developed.     

Evaluation of a proper controller performance for maximum-power point tracking of a stand-alone PV system

In this paper the implementation of a suggested stand-alone PV system, for maximum-power point tracking (MPPT), is carried out. Also, this paper presents a comparative study, through experimental work, between the conventional PI controller and the fuzzy logic controller (FLC) under different atmospheric conditions. The implemented system with both the PI controller and the FLC gives a good maximum-power operation of the PV array, but the tracking capability for different optimum operating points is better and faster for the case of using the FLC compared to the case of using the PI controller.     

Global Level Path Planning for Mobile Robots in Dynamic Environments

This paper presents a self-adapting approach to global level path planning in dynamic environments. The aim of this work is to minimize risk and delays in possible applications of mobile robots (e.g., in industrial processes). We introduce a hybrid system that uses case-based reasoning as well as grid-based maps for decision-making. Maps are used to suggest several alternative paths between specific start and goal point. The casebase stores these solutions and remembers their characteristics. Environment representation and casebase design are discussed. To solve the problem of exploration vs. exploitation, a decision-making strategy is proposed that is based on the irreversibility of decisions. Forgetting strategies are discussed and evaluated in the context of case-based maintenance. The adaptability of the system is evaluated in a domain based on real sensor data with simulated occupancy probabilities. Forgetting strategies and decision-making strategies are evaluated in simulated environments. Experiments show that a robot is able to adapt in dynamic environments and can learn to use paths that are less risky to follow.     

Robust图像跟踪：强度—特征混合式目标定位

在像平面上确定目标的位置(由它的瞄准点位置表示)是图像跟踪技术的核心.目前研究的目标是图像定位方法多偏重于单一的工作模式,因而难以适应变化较大的使用环境.本文提出一种旨在综合利用强度相关和特征匹配的混合式目标图像定位方法.假定当前帧图像已经过预处理并完成分割,首先通过一种自适应门限SSDA并辅之以投影排序搜索,尽可能快速地剔除与参考图差别较大的子区;再用一种简便可靠并可具一定记忆能力的特征匹配法,在保留的子区集内,为目标精确定位——宣布瞄准点位置.利用实际序列图像所作实验表明:上述方法较之通常采用的单一工作模式的定位方法,有明显增强的Robust性以及更广的适应性,而增加的计算代价不大.     

机械臂的动态混合控制

本文研究当机械臂的终端受有约束时的控制问题,其中心内容是给出“任务规范投影算子”的概念,利用它首先将机械臂的动态方程解耦为两组方程,它们分别描述了运动与约束力,在此基础上给出了机械臂的控制律,使闭环系统跟踪期望的速度与约束力。