基于宽带毫米波工作体制的雷达目标识别方法探讨

对基于宽带毫米波工作体制的雷达目标特征获取和识别方法进行了综合分析和探讨.表明:在毫米波照射下,雷达目标可模型化为由多个散射中心组成的扩展目标;只要发射信号有足够的带宽,就可以从回波信号中获得各散射中心的空间分布、类型等特征;仿真结果说明,这种方法对高频区复杂目标的识别是有效的.     

基于HMM方法的动态手势轨迹训练性能研究

基于HMM(Hidden Markov Model,隐形马尔可夫模型)对动态手势轨迹的训练是手势识别的关键技术之一。本文对HMM的模型训练采用Baum.Welch算法,并分别从迭代次数,样本个数选取,以及模型初值选取等方面对动态手势轨迹的训练性能进行了研究。实验结果表明HMM方法对具有时空特性的动态手势轨迹识别是非常有效的。     

运用模式分类的雷达抗转发式距离欺骗干扰方法

针对雷达转发式欺骗干扰中的距离欺骗，提出了一种基于模式分类来识别目标与干扰的方法。该方法基于干扰和目标能量和起伏特性差异确定提取特征因子，再利用RBF神经网络方法进行分类。仿真结果表明，该方法具有较好的抗距离欺骗干扰性能。     

Distributed Speech Recognition Systems and Some Key Factors Affecting It''''s Performance

1　IntroductionWiththerapiddevelopmentofInternetandmobilecommunications,theresearchonwirelessmobilenetworkshasbecomethenewhotspotinin formationtechnologyfield .Asweknow ,mobileterminals (mobilephone,forexample)arethetooltohelppeopletoaccessanyinformationtheyneedbyanymediaatanytimeandanywhere .However,itissometimesdifficultformobileterminalstoplaysucharolebecauseofthelimitationssuchaslimitedca pacity ,lowpower,andinconvenienceinoperating .So,peoplehopetofindanotherwaytoaccessnet workinformatio…     

由三面投影图生成三维立体图的方法研究

针对创新设计中零部件的三维虚拟造型问题，提出了一种由二维投影图生成三维立体图的计算机化辨识方法。通过辨识简单三维立体的形状和空间位置，克服了二维图形中面的积聚性和零件之间不规则相贯和截交曲线的识别问题，进而实现了复杂组合形体的计算机化设计与造型。最后，以箱体类零件为例，在AutoCAD环境下利用VC 和ObiectARX开发工具编程验证了该方法的有效性。     

消失模铸造模成型机的特点及应用

介绍了消失模铸造工艺对成型机的特殊要求,高性能成型机在大规模工业化消失模生产中的重要性,重点阐述了德国Teubert公司TVY130/90消失模成型机的特点及应用,并对成型机的国产化研究与开发提出了建议。     

Magnetic Resonance Visualisation of Flow and Pore Structure in Packed Beds with Low Aspect Ratio

Different NMR techniques were combined to obtain the structure and velocity information for a systematic investigation of fixed beds with low aspect ratio (tube diameter to particle diamter, d_t/d_p) in the range 1.4 to 32. The structure of the void space was determined for a variety of packed beds of glass beads or regular and irregular porous pellets by magnetic resonance imaging (MRI). Based on the images the radial distribution of the voids within the bed was obtained. Ordering effects were found even for non‐spherical and polydisperse particles, and a maximum of the fluid density near the tube wall was confirmed for all pellet geometries and sizes. By combining MRI with velocity encoding, velocity profiles and distributions of flow velocity components of a single fluid phase through packed beds have been acquired. The radial velocity distribution follows an oscillatory pattern which largely reflects the ordering of the particles, which can be accessed from the density distribution of the interparticle fluid. Maximum velocities of up to four times the average value were found to occur near the tube wall. This wall effect was observed for all but the smallest particles, where the aspect ratio was d_t/d_p = 32. Moreover, a visualisation of flow pattern in the presence of packed particles was achieved by using a tagging technique, and the stationary flow field could be identified for an experimental time of several hours.     

消失模生产中应用表面光泽涂料防止球铁件产生夹渣缺陷

以汽车弹簧托架为实例，分析用EPC法生产球铁件时产生夹渣缺陷的原因，提出采用表面光泽涂料可有效防止夹渣缺陷的产生，同时亦可改善铸件表面粗糙度。     

Photocatalytic degradation of 2,2‐bis(4‐hydroxy‐3‐methylphenyl) propane (BPP) based on molecular recognition interaction

BACKGROUND: Endocrine disruptors in the aquatic environment and their potential adverse effects are currently issues of concern. One of these endocrine disruptors is 2,2‐bis(4‐hydroxy‐3‐methylphenyl)propane (BPP). In this work the molecular recognition interaction of BPP with β‐cyclodextrin (β‐CD) was studied using IR spectroscopy and steady state fluorescence spectroscopy, and the photocatalytic degradation behaviour of BPP based on molecular recognition interaction was investigated in a TiO₂/UV–visible (λ_max = 365 nm) system. This might provide a new method for the treatment of some organic pollutants in wastewater. RESULTS: β‐CD reacts with BPP to form a 1:1 inclusion complex, the formation constant of which is 4.94 × 10³ L mol^?1. The photodegradation rate constant of BPP after molecular recognition by β‐CD showed a 1.42‐fold increase in the TiO₂/UV–visible (λ_max = 365 nm) system. The photodegradation of BPP depended on the concentration of β‐CD, the pH value, the gaseous medium and the initial concentration of BPP. The photodegradation efficiency of BPP with molecular recognition was higher than that without molecular recognition. After 100 min of irradiation the mineralisation efficiency of BPP after molecular recognition by β‐CD reached 94.8%, whereas the mineralisation efficiency of BPP before molecular recognition by β‐CD was only 40.6%. CONCLUSION: The photocatalytic degradation of BPP after molecular recognition by β‐CD can be enhanced in the TiO₂/UV‐visible (λ_max = 365 nm) system. This enhancement is dependent on the enhancement of the adsorption of BPP, the moderate inclusion depth of BPP in the β‐CD cavity and the increase in the frontier electron density of BPP after molecular recognition. Copyright © 2008 Society of Chemical Industry     

我国企业品牌弱势原因分析

我国是一个制造业大国但同时又是一个品牌弱国。我国企业由于缺少品牌优势,产品出口乃至整个国民经济都受到严重影响。我国企业缺少强势品牌的原因在于:缺乏品牌经营的环境和意识;品牌管理手段落后,缺乏战略性的品牌管理与规划;品牌价值观定位不准确,缺乏以品牌核心价值为中心的品牌识别;缺乏品牌战略管理组织与管理人才以及品牌的定期检查制度和危机处理机制。要改变这种状况,必须尽快更新观念,强化品牌基础工作,尤其是注重品牌组织管理体系的建设和专业人才的培养与引进,充分借鉴国外成功经验并结合实际不断创新。只有这样,才能提高本土品牌的影响力,逐步缩小与国外著名品牌的差距。