Ionic conductivity and interfacial properties of polymer electrolytes based on PEO and boroxine ring polymer

Blended polymer electrolytes based on poly(ethylene oxide) (PEO) and boroxine ring polymer (BP) solvated with lithium triflate were formulated and evaluated. Compared to PEO–salt polymer electrolyte, ionic conductivities of blended polymer electrolytes were two orders of magnitude higher in a low‐temperature range; as well, lithium transference numbers were increased to ～ 0.4. These were due to the increased mobility and anion trapping of boroxine rings. BP also exhibited the stabilizing effect on lithium–polymer electrolyte interface, and a reduced interfacial resistance between lithium metal and the polymer electrolyte was found with increasing of BP content. Polymer electrolytes based on PEO and BP are suitable for use in lithium secondary battery. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 17–21, 2002; DOI 10.1002/app.10090     

Effect of rare earth elements surface treatment on tensile properties of aramid fiber‐reinforced epoxy composites

Solutions of rare earth modifier (RES) and epoxy chloropropane (ECP) grafting modification method were used for the surface treatment of aramid fiber. Tensile properties of both the aramid/epoxy composites and single fibers were tested. The effects of RES concentration on tensile properties of aramid/epoxy composites were investigated in detail to explore an optimum amount of rare earth elements in solution for modifying aramid fiber. The fracture surface morphologies of tensile specimens were observed and analyzed with the aid of SEM. The experimental results show that rare earth treatment is superior to ECP grafting treatment in promoting interfacial adhesion between the aramid fiber and epoxy matrix. Meanwhile, the tensile strengths of single fibers were almost not affected by RES treatment. The optimum performance is obtained when the content of rare earth elements is 0.5 wt %. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1037–1041, 2004     

女性护理液抗炎止痒作用的实验研究

女性护理液为中药苦参醇提液加三氯羟基二苯醚复配而成，根据药理方法学以实验动物建立模型，观察护理液的抗炎、止痒作用。结果，单独使用三氯羟基二苯醚，有较好的抗菌消炎作用，但是止痒作用不明显。以苦参醇提液和三氯羟基二苯醚复配，其抗炎、止痒作用均接近地塞米松磷酸钠注射液。     

Pd deposited on Cu(110): a highly performant catalyst for the 1,3-butadiene hydrogenation reaction

The catalytic properties, with respect to the 1,3-butadiene hydrogenation reaction, of strained Pd films on Cu(110) (lattice mismatch 8%) has been probed as a function of the film thickness. The characterization of the adlayer has been made by the combined use of STM with LEED and AES. For deposits below 10¹⁵ Pd/cm² (i.e., about 1 ML) the catalytic activity is near zero. This is the consequence of the formation of a Pd–Cu surface alloy with tendency for Cu to migrate/segregate to the surface. The catalytic activity suddenly increases to reach a maximum value for about 3 ML; the activity is then one order of magnitude higher than that of the pure Pd(110) surface. This is the consequence of the presence of a strained Pd overlayer, with Pd surface atoms having very unusual geometry, and hence very peculiar electronic and chemical properties. The catalytic activity then decreases as the Pd coverage is increased, and tends to values near that of the pure Pd(110). Gradual relaxation of the film geometry towards that of the normal fcc Pd structure probably exists.     

Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.     

Role of Interfacial Carbon layer in the Thermal Diffusivity/Conductivity of Silicon Carbide Fiber-Reinforced Reaction-Bonded Silicon Nitride Matrix Composites

The role of an interfacial carbon coating in the heat conduction behavior of a uniaxial silicon carbide nitride was investigated. For such a composite without an interfacial carbon coating the values for the thermal conductivity transverse to the fiber direction agreed very well with the values calculated from composite theory using experimental data parallel to the fiber direction, regardless of the ambient atmosphere. However, for a composite made with carbon-coated fibers the experimental values for the thermal conductivity transverse to the fiber direction under vacuum at room temperature were about a factor of 2 lower than those calculated from composite theory assuming perfect interfacial thermal contact. This discrepancy was attributed to the formation of an interfacial gap, resulting from the thermal expansion mismatch between the fibers and the matrix in combination with the low adhesive strength of the carbon coating. In nitrogen or helium the thermal conductivity was found to be higher because of the contribution of gaseous conduction across the interfacial gap. On switching from vacuum to nitrogen a transient effect in the thermal diffusivity was observed, attributed to the diffusion-limited entry of the gas phase into the interfacial gap. These effects decreased with increasing temperature, due to gap closure, to be virtually absent at 1000°C.     

Measurement of Fiber/Matrix Interfacial Shear Stress at Elevated Temperatures

An apparatus for measurement of the fiber/matrix interfacial shear stress at temperatures up to 1100° is described. Equipment was used to measure interfacial properties as a function of temperature in two ceramic-matrix composites and one metal-matrix composite. In the composites where the thermal expansion of the matrix was higher than that of the fiber, the interfacial shear stress decreased with temperature. The opposite trend was observed in a system with low matrix thermal expansion. The change of the interfacial shear stress with temperature of all the composites studied can be fully explained by considering the fiber/matrix expansion differences.     

Duration of slip-resistant shoe usage and the rate of slipping in limited-service restaurants: results from a prospective and crossover study

Several studies have indicated that slip-resistant shoes may have a positive effect on reducing the risk of slips and falls, a leading cause of injury at work. Few studies, however, have examined how duration of shoe usage affects their slip-resistance properties. This study examined the association between the duration of slip-resistant shoes usage and the self-reported rate of slipping in limited-service restaurant workers. A total of 475 workers from 36 limited-service restaurants in the USA were recruited to participate in a 12-week prospective study of workplace slipping. Of the 475 participants, 83 reported changing to a new pair of shoes at least once during the 12-week follow-up. The results show that slip-resistant shoes worn for less than six months were moderately more effective than those worn for more than six months. Changing to a new pair of shoes among those wearing slip-resistant shoes at baseline was associated with a 55% reduction in the rate of slipping (RR = 0.45, 95% CI = 0.23–0.89). Further research is needed to develop criteria for the replacement of slip-resistant shoes.

Practitioner Summary: The duration of usage impacts the slip-resistance properties of slip-resistant shoes. Slip-resistant shoes worn for less than six months were moderately more effective in reducing slips than slip-resistant shoes worn for more than six months. Shoe use policies should not only encourage or require their use but also include guidance on replacing slip-resistant shoes at regular intervals.     

LoVis: Local Pattern Visualization for Model Refinement

Linear models are commonly used to identify trends in data. While it is an easy task to build linear models using pre‐selected variables, it is challenging to select the best variables from a large number of alternatives. Most metrics for selecting variables are global in nature, and thus not useful for identifying local patterns. In this work, we present an integrated framework with visual representations that allows the user to incrementally build and verify models in three model spaces that support local pattern discovery and summarization: model complementarity, model diversity, and model representivity. Visual representations are designed and implemented for each of the model spaces. Our visualizations enable the discovery of complementary variables, i.e., those that perform well in modeling different subsets of data points. They also support the isolation of local models based on a diversity measure. Furthermore, the system integrates a hierarchical representation to identify the outlier local trends and the local trends that share similar directions in the model space. A case study on financial risk analysis is discussed, followed by a user study.     

Evaluating the Impact of User Characteristics and Different Layouts on an Interactive Visualization for Decision Making

There is increasing evidence that user characteristics can have a significant impact on visualization effectiveness, suggesting that visualizations could be designed to better fit each user's specific needs. Most studies to date, however, have looked at static visualizations. Studies considering interactive visualizations have only looked at a limited number of user characteristics, and consider either low‐level tasks (e.g., value retrieval), or high‐level tasks (in particular: discovery), but not both. This paper contributes to this line of work by looking at the impact of a large set of user characteristics on user performance with interactive visualizations, for both low and high‐level tasks. We focus on interactive visualizations that support decision making, exemplified by a visualization known as Value Charts. We include in the study two versions of ValueCharts that differ in terms of layout, to ascertain whether layout mediates the impact of individual differences and could be considered as a form of personalization. Our key findings are that (i) performance with low and high‐level tasks is affected by different user characteristics, and (ii) users with low visual working memory perform better with a horizontal layout. We discuss how these findings can inform the provision of personalized support to visualization processing.