Synthesis and characterization of polypyrrole/TiO2 composites on mild steel

The anodic codeposition of polypyrrole and TiO₂ on AISI 1010 steel substrates in oxalic acid medium was studied from the standpoint of their use as protective coatings against corrosion. The influence of surface treatment, pH, stirring and current density (j) on the current efficiency () and pigment concentration incorporated in the polymer (C _c) were investigated. The highest C _c values (7.5%) were found at j = 5 mA cm^–2, pH 4 and stirred baths. The composites were characterized by adherence and surface roughness tests, XPS, EDX, SEM, FTIR and cyclic voltammetry.     

原位聚合法制备纳米氧化铬-聚吡咯复合材料

用沉淀法制备了纳米氧化铬（Cr2O3）粉体，对纳米Cr2O3粉体进行表面改性，使其均匀分散到吡咯单体中，采用原位聚合法制备了纳米Cr2O3／聚吡咯（PPy）复合材料。对合成的材料用X射线衍射（XRD）、傅立叶变换红外光谱（FT-IR）和透射电镜（TEM）等方法进行了表征。结果表明：PPy成功包覆在Cr203表面，形成了纳米Cr2O3／PPy复合材料。     

Conducting composites of poly(N‐vinylcarbazole), polypyrrole,and polyaniline with 13X‐zeolite

N‐vinylcarbazole (NVC) was polymerized by 13X zeolite alone in melt (65°C) or in toluene (110°C) and a poly(N‐vinylcarbazole) (PNVC)‐13X composite was isolated. Composites of polypyrrole (PPY) and polyaniline(PANI) with 13X zeolite were prepared via polymerization of the respective monomers in the presence of dispersion of 13X zeolite in water (CuCl₂ oxidant) and in CHCl₃ (FeCl₃ oxidant) at an ambient temperature. The composites were characterized by Fourier transform infrared analyses. Scanning electron microscopic analyses of various composites indicated the formation of lumpy aggregates of irregular sizes distinct from the morphology of unmodified 13X zeolite. X‐ray diffraction analysis revealed some typical differences between the various composites, depending upon the nature of the polymer incorporated. Thermogravimetric analyses revealed the stability order as: 13X‐zeolite > polymer‐13X‐zeolite > polymer. PNVC‐13X composite was essentially a nonconductor, while PPY‐13X and PANI‐13X composites showed direct current conductivity in the order of 10^?4 S/cm in either system. However, the conductivity of PNVC‐ 13X composite could be improved to 10^?5 and 10^?6 S/cm by loading PPY and PANI, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 913–921, 2006     

油酸和亚油酸在聚吡咯修饰铂电极上的电化学反应

基于醌的电化学还原原理,利用1,4-萘醌对游离脂肪酸的还原峰电流的测定,检测植物油中油酸和亚油酸的浓度,从而求出所测植物油的酸价。采用循环伏安法在乙腈溶液中聚合吡咯单体于铂电极表面制备化学修饰电极Ppy/ClO4-/Pt,用线性伏安法检测油酸和亚油酸浓度。结果表明:在浓度分别为5.3×10-3～7.9×10-2mol/L和9.6×10-6～1.28×10-3mol/L之间,还原峰电流与油酸和亚油酸浓度呈现良好的线性关系,相关系数(R2)分别是0.9948和0.9922,亚油酸和油酸的检出限为3.0×10-6mol/L和1.6×10-3mol/L(S/N=3)。并且将该化学修饰电极用于植物油橄榄油、玉米油、花生油、大豆油和芝麻油中酸价的检测,结果表明,化学修饰电极法是一种简便、快速实用的酸价滴定方法,可以作为碱滴定法的替代方法。     

Halogen-induced charge transfer polymerization of pyrrole in aqueous media

Simultaneous polymerization and doping of pyrrole have been carried out in the presence of a halogenic electron acceptor, bromine (Br₂) or iodine (I₂), in aqueous dispersion or in a two-phase solvent system. The morphology of the polypyrrole (PPY) so produced is granular and porous. The electrical conductivity of the PPY-I₂ charge transfer (CT) complex is of the order of 10¹ ohm⁻¹ cm⁻¹ while that of the PPY-Br₂ complex is about one order of magnitude less. Both complexes are stable in the atmosphere. The physicochemical properties of the PPY-I₂ and PPY-Br₂ CT complexes prepared under various experimental conditions are examined in detail.     

镁表面Nafion/聚吡咯与Nafion/二甲基亚砜有机涂层耐蚀性能的研究

采用浸镀法在镁基体表面制备了Nafion/聚吡咯和Nafion/二甲基亚砜(DMSO)有机涂层,利用光学显微镜和电化学测量系统研究了有机涂层的形貌及其耐蚀性能.结果表明,Nafion/聚吡咯有机涂层的厚度随着浸镀次数的增加几乎不变,且Nafion/聚吡咯有机涂层降低了镁的耐蚀性能;而Nafion/DMSO有机涂层的厚度则随着浸镀次数的增加而线性增加,并且Nafion/DMSO有机涂层能有效地改善镁的耐蚀性能,耐蚀性能随着涂层厚度的增加而提高.与无涂层的试样相比,耐蚀性能最高提高18倍.     

基于RGD多肽掺杂聚吡咯-铟锡氧化物的仿生微电极构建及用于细胞生物学行为的电化学阻抗谱检测

构建一种基于RGD多肽分子掺杂聚吡咯膜修饰的铟锡氧化物微电极(PPy/RGD-ITO),并以此作为传感电极实现细胞生物学行为的电化学阻抗谱检测.采用光刻技术蚀刻感光干膜绝缘层制备ITO微电极;以含RGD模体的多肽分子作为吡咯电聚合唯一的掺杂阴离子,通过电化学共聚合方式在ITO微电极表面沉积PPy/RGD复合膜形成PPy/RGD-ITO微电极;原子力显微镜(AFM)、接触角测量仪和傅里叶变换红外光谱仪(FTIR)分别表征PPy/RGD复合膜的表面拓扑形貌、湿润性和组成成分;人肺癌细胞株A549铺展、粘附及增殖实验考察了PPy/RGD复合膜与细胞间的相互作用;以构建的PPy/RGD-ITO微电极作为传感电极,通过电化学阻抗谱技术对A549细胞粘附增殖行为及天然抗癌药物分子重楼皂苷I的细胞毒性进行了分析.结果显示,通过简单的电化学共聚合成功将RGD分子掺杂进PPy膜内,且PPy/RGD复合膜具有优异的表面物理性能;PPy基质膜内掺杂的RGD分子保留其生物活性,相比裸ITO电极和聚4-苯乙烯磺酸钠(PSS)掺杂的PPy膜,PPy/RGD复合膜能更好地促进A549细胞的铺展、粘附和增殖;由于PPy/RGD-ITO微电极表面A549细胞形态学变化可改变电极系统的阻抗谱特征,因此通过电化学阻抗谱技术可解析A549细胞粘附增殖行为学信息,同时可定量分析重楼皂苷I细胞毒性.因此,通过简单的电化学共聚合方法将生物活性RGD分子掺杂进PPy膜内制备出的PPy/RGD膜具有优良的生物相容性,可作为一种重要的仿生电极修饰材料用于构建电子系统和细胞生物学系统的耦合界面,未来可应用于细胞生物学行为及药物筛选研究.     

Mechanical,thermal, and microwave properties of conducting composites of polypyrrole/polypyrrole‐coated short nylon fibers with acrylonitrile butadiene rubber

Pyrrole was polymerized in the presence of anhydrous ferric chloride as oxidant and p‐toluene sulfonic acid as dopant. Polypyrrole‐coated short nylon fibers were prepared by polymerizing pyrrole in the presence of short nylon fibers. The resultant polypyrrole (PPy) and PPy‐coated nylon fiber (F‐PPy) were then used to prepare rubber composites based on acrylonitrile butadiene rubber (NBR). The cure pattern, direct current (DC) conductivity, mechanical properties, morphology, thermal degradation parameters, and microwave characteristics of the resulting composites were studied. PPy retarded the cure reaction while F‐PPy accelerated the cure reaction. Compared to PPy, F‐PPy was found to be more effective in enhancing the DC conductivity of NBR. The tensile strength and modulus values increased on adding PPy and F‐PPy to NBR, suggesting a reinforcement effect. Incorporation of PPy and F‐PPy improved the thermal stability of NBR. The absolute value of the dielectric permittivity, alternating current (AC) conductivity, and absorption coefficient of the conducting composites prepared were found to be much greater than the gum vulcanizate. PPy and F‐PPy were found to decrease the dielectric heating coefficient and skin depth significantly. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and magnetorheological characteristics of ribbon‐like,polypyrrole‐coated carbonyl iron suspensions under oscillatory shear

One of the crucial problems of classical magnetorheological (MR) fluids is their high rate of sedimentation. This disadvantage may be substantially eliminated using core‐shell particles. The aim of this study is to prepare spherical carbonyl iron (CI) particles coated with conducing polymer polypyrrole (PPy) with ribbon‐like morphology. Scanning electron microscopy proved the formation of the ribbon‐like layer onto CI particles while Fourier transform infrared spectroscopy confirmed the chemical structure of PPy. The magnetic properties observed via vibrating sample magnetometer showed decreased magnetization saturation of core‐shell‐structured particles due to the existence of non‐magnetic surface layer. MR measurements performed under oscillatory shear flow as a function of the applied magnetic flux density, temperature, and particle concentration showed that core‐shell particle‐based MR suspension exhibits sufficient MR performance for practical applications. Moreover, the suspension stability is promoted significantly when core‐shell particles are used as a dispersed phase. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013