一种T形高压输电线路故障测距新方法

对T形线路的故障测距，现有方法都是先判断故障支路，再将3端线路等效成2端线路进行测距。但在 T节点附近短路，尤其是经高阻短路时，现有的测距方法由于无法正确判别故障支路而存在一定范围的测距死区。针对上述缺陷，分别假设故障发生在某一支路，由假定正常的2段支路端的电压、电流推算求得 T节点电压和注入假定故障支路的电流，从而分别求得3个故障距离。经证明，求得的3个故障距离有且仅有1个在0和对应支路总长度之间，该距离就是真实的故障距离，故障发生在对应支路上。该方法无需事先判别故障支路即可测距，在 T节点附近经高阻故障时无测距死区。其测距精度理论上不受过渡电阻和故障类型影响，无需故障前数据，且对滤波无高要求。EMTP仿真结果表明该方法正确、有效，测距精度高。     

火焰原子吸收光谱法测量污水中锑量的测量不确定度评定

通过火焰原子吸收光谱法对水中的锑量进行了测定,对影响测量结果的不确定度分量进行了量化的计算,从而得出影响锑量测量不确定的主要因素是测量样品消解液中的锑的质量浓度引起的不确定度.     

谈谈职业教育的大众性

对职业教育的大众性问题进行了论述、实证分析和理论、政策、改革等思考。     

Bruchanalyse an Hohlgläsern

Failure analysis of hollow glasses The failure analysis is very important to clarify damages of hollow glasses. Damages of glass bottle through over pressure are very often linked with damages to persons. This is the reason why the causal research is from particular importance. Different surface characteristics of glass fragments as well as the fracture pattern give hints to the direction of the crack, the stress just before breakage and the reason of stress. A reconstruction of the bottle is a further helpful instrument for cause studies. The difference of the various characteristics of the surface will be explained. Further on there will be discussed different reasons and mechanism of fracture.     

厦门市气源转换的技术分析

分析了气源转换时原有输配系统的管道、调压设备、计量设备、用气设备与天然气系统相适应的问题，提出了相应的措施。     

关于传统与现代设计理念的思考

中国传统的思维方式深深地影响了中国传统陶瓷艺术设计，中国传统陶瓷艺术设计的历史脉络清晰，深入到设计思维系统的深层，才有助于我们对当前的陶瓷设计作出有效的转化。现代陶瓷设计的观念是对传统陶瓷文化的延续和发展，深入挖掘传统思维方式的源头活水，才是发展中国现代陶瓷设计的关键。     

管内覆丝网强化对流换热及阻力特性的实验研究

通过实验对管内覆丝网管进行了强迫对流换热和阻力特性研究。结果表明：管内覆丝网使换热明显增强，阻力也相应增长。菱形丝网对角线距离与平行边距离之比对换热效果有决定作用，丝网厚度对换热的影响比较小，而丝网网格的大小对换热几乎没有影响，在相同的泵功率和几何条件下，换热系数最大增加２１％。     

Impact of QOS requirements on video coding for ATM networks

The broadband integrated services digital networks (B-ISDN) based on asynchronous transfer mode (ATM) technology can support a wide range of applications such as voice, video, still images, and data. Compression techniques increase the effective bandwidth utilization, but the bursty and asynchronous nature of the traffic can still lead to congestion in the network, and degradation of image quality and quality of service (QOS). Some of the features to provide better coding schemes for ATM networks are layered coding, resynchronization, buffering, interleaved schemes, constrained bit rate due to buffers, encapsulation with the RTP or AAL1 for clock recovery, lapped transforms, motion compensation, and optimal bit allocation for coders based on wavelet transforms. We review various techniques forimage and video coding such as transforms, motion compensation, vector quantization, and subband coding. We outline the impact of the cell loss ratio (CLR), delay and cell delay variation (CDV) on video coding: blocking effects, loss of frame synchronization, motion vectors, and vector quantization codewords. The open problems include tuning coding parameters to the available QOS provided by the network.     

龙潭拱坝砼上坝运输方案选择

龙潭拱坝坝高９０ｍ，砼上坝运输是砼施工过程中的中间环节，控制进度的关键，必须因时因地制宜地选择适当的运输机械和运输方案，使砼运输能做到保质、保量、及时和经济，通过论证比较，结合本工程现实情况，砼上坝运输不采用缆机而采用门机方案．