紧凑式轧机变形规程优化设计

本文从紧凑式轧机的轧制变形特点出发,分析了其变形规程设计的主要特点和方法,讨论了限制其道次变形量的基本因素,给出了优化设计的目标函数和约束条件。指出,类似这种具有复杂约束的轧制变形问题采用混合罚函数法处理更为有效,并成功地采用该方法进行了变形规程的试设定。     

Extraction of penicillin G from simulated media by an emulsion liquid membrane process

The extraction of penicillin G from simulated media was performed by water/oil/water (w/o/w) emulsion liquid membranes (ELMs) and studied under various operational conditions in a batch system. The degree of extraction achieved was between 80% and 95% under specific conditions. A concentration of greater than nine times the initial concentration of penicillin G in the external phase was obtained in the internal phase. The pH of the internal aqueous solution, containing a basic salt, was theoretically calculated on the basis of the amount of penicillin G transported into the internal phase. The calculated results agreed with the experimental data well and were used to select a suitable type and concentration of a basic salt in the internal phase to give a pH within the range 5 to 8 where penicillin G was stable after the termination of extraction. The extraction of penicillin G was successfully performed by the ELM process with sodium carbonate in the internal phase.     

The thermal ignition of lignocellulosics in infinite slab and cubic geometries

Wood shaving samples were heated in both cubic baskets and in a previously described system realising the conditions of the ‘infinite slab’ in thermal ignition. Results from the two sets of experiment were found to be totally consistent with each other.     

Forming the optimal union of multiple databases

Many organizations, best illustrated by libraries, have access to hundreds of databases possessing varying degrees of complimentary and overlapping records. While users may receive positive marginal benefits from data duplications, all databases and their services cannot be supported because of resource limitations. This paper attempts to conceptualize the problem of database collection in an environment of multiple databases, with differential content and performance characteristics, diverse users, and limited resources. It defines the database collection problem as a constrained zero-one integer programming problem and solves for the optimal combination or union of databases. Several extensions are shown, where special conditions are imposed on the relationships between databases and/or their availability.     

Applications of the 4×4 determinant method and the POLYGON ENGINE

In the first half of the paper, various types of processing pertaining to a polygon, using the 4×4 determinant theories are explained along with a new containment test algorithm of a point in a polygon. In the latter half of the paper, a general-purpose geometric processor, the POLYGON ENGINE, is presented which can deal with various types of interference problems, such as Boolean operations in solid modelling, hidden line and surface eliminations, ray tracing and so on. It is, a successor of the TRIANGLE PROCESSOR and is also based upon the 4×4 determinant theories [4–6]. While the TRIANGLE PROCESSOR processes a triangulated polygon on a triangle-by-triangle basis, the POLYGON ENGINE can treat a polygon without triangulation. The latter is expected to be more functional, more efficient and easier to use.     

部件试验模态综合的简便方法

本文将一种基于完备模态基的模态综合技术应用于子结构的试验模态综合,获得成功。这种半试验半理论的模态综合方法是一种较为简便的、要求试验工作量较小的试验模态综合法,因为它只要求测量子结构的振动模态和频率即可。数值仿真结果表明,这种简便的试验模态综合法是行之有效的。     

RE／S值对控轧低碳Mn－Nb－RE钢硫化物成分和形貌的影响

用扫描电镜测定了含０．０４１％～０．０７６％ＲＥ的低碳Ｍｎ－Ｎｂ－ＲＥ钢中硫化物的成分、大小和形貌。ＲＥ／Ｓ值为２．８～３．０时，钢中的硫化物充分变质。     

2~#加压站煤气热值检测及控制

本文叙述了马钢引进美国ＦＬＵＩＤ　ＤＡＴＡ公司的热值仪与计算机控制系统，有效地解决了煤气混合加压生产中热值的检测与控制问题。     

调质状态下40Cr钢的焊接

在合理制定焊接工艺的基础上，采用R307珠光体耐热钢焊条成功地进行40Cr钢在调质状态下的焊接，解决了通常采用25—13型奥氏体焊条焊接出现的焊缝强度低、焊接接头性能差的问题。     

关于砂金工艺矿物学研究规范化的建议

本文从样品的采集、加工、制备到砂金性状、矿砂物质组成;从分离、鉴定质量要求到选矿产品考察;从矿砂可洗性、可选性评价到矿砂工艺类型确定等项内容的系统化、标准化,阐述了砂金工艺矿物学的研究规范。