森林保险市场的信号甄别和激励机制

基于森林保险市场存在的两种不确定因素,从减少道德风险和抑制逆向选择两方面出发,同时引入了免赔额和共保率,并对投保林主和森林进行综合风险分类,构建了一个信号甄别和激励模型,导出了一种符合森林保险市场发展需要的费率与共保率厘定体系.该方法打破了传统森林保险费率统一的定价模式.     

医用电解质分析仪的研制

对医学常规体液检查中5种离子浓度的检测,利用单片机、高精度A/D芯片、实时时钟等,给出了一种切实可行的解决方案,并详细地阐述了系统的软硬件设计。     

Development of a Reconfigurable Platform for Manufacturing Equipment Control

In modern manufacturing equipment control area,controller is required to deliver higher computing capability for adopting advanced algorithms to meet speed and accuracy requirements,and reconfigurabilities for changing or(and)adding features or functions.This paper presents a methodology in design and implementation of a high performance and reconfigurable platform for manufacturing equipment control.This methodology is in virtue of system on a programmable chip(SoPC)technolo- gy but replacing the on-chip processor by an external high performance,floating-point digital signal processor(DSP).The appli- cation of the DSP is designed as a multi-threaded framework,which has more flexibilities than a traditional single-loop one.Fur- thermore,the field programmable gate array(FPGA)system can be reconfigured easily and quickly to meet a new requirement by dragging and dropping pre-built components in a SoPC building environment.As a result,the controller platform is more recon- figurable in terms of algorithms and functions.This platform is implemented in a 3-axis milling machine control and the result indicates that the design and implementation presented in this paper is feasible.     

电视节目远程录制与点播系统的设计及应用

在当今社会,每天全国卫星电视网传送出近百套电视节目,覆盖了文化、教育、科技、体育等大量有价值的内容,能否让希望保存这些资源的人或由于某些原因无法及时看到并录制自己所关注节目的人方便快捷地获得这些电视资源?电视节目远程录制与点播系统就可以让使用者很容易地获得所需的电视资源,本文将介绍本系统的设计思想和编程技术。     

油田单井数据自动化远程采集系统

从系统结构、硬件构成、网络结构和软件设计等几个方面 ,介绍了针对偏、散、远的油田单井的数据采集系统 ,并简述了系统软件的开发思想 ,给出了远程数据采集模式———利用电话线路作为传输通路 ,PC作为监控中心 ,实现单个油井无人值守的自动数据采集。     

Development of microphone leak detection technology on Fugen NPP

A method of leak detection, based on high-temperature resistant microphones, was originally developed in JNC to detect leakages with flow rates from 1 m³/h to 500m³/h. The development performed on Fugen is focused on detection of a small leakage at an early stage. Specifically, for the inlet feeder pipes the leak rate of 0.2gpm (0.046m³/h) has been chosen as a target detection capability. Evaluation of detection sensitivity was carried out in order to check the capability of the method to satisfy this requirement. The possibility of detecting and locating a small leakage has been demonstrated through the research.     

堆泵浦3He-Ar-Xe激光体系小信号增益与效率实验研究

介绍了CFBR-Ⅱ堆泵浦3He-Ar-Xe体系1.73μm波长激光小信号增益和泵浦效率的实验研究.在脉冲峰热中子注量率为6.9×1014cm-2.s-1、3He、Ar、Xe气体的比例为80.219.30.5,总压强为8.3×104Pa时,采用透射率从1.7%到10%的6个谐振腔输出镜均获得了激光输出.在谐振腔输出镜透射率为7%时,得到了激光脉冲峰功率为45mW,其对应的激光泵浦效率为1%.在此基础上,利用Rigroa分析方法拟合出3He-Ar-Xe体系激光的小信号增益为0.24%/cm,饱和光强为36W/cm2.     

两种标准信号之间的函数变换

用函数变换的方法解决两种标准信号之间的转换，进而阐述了数学在解决实际问题中的应用。     

降低妈湾电厂空预器漏风率的措施

为降低空预器漏风率，从结构设计分折得出空、烟气压差大和密封间隙大是其漏风的主要原因，通过采取高压水冲洗，气脉冲燃气吹灰，双密封改造，空预器重新选型等一系列措施来降低漏风率。