圆盘式高速金属冷锯机锯切功率的实验研究

对１６００圆盘式高速金属冷锯机进行了锯切功率的实验研究。对某厂四种有代表性的产品，用不同的进锯速度，实测每种条件下的锯切功率变化，和最大瞬时锯切功率与平均锯切功率之比。并以实测数据为基础，得出每种产品以进锯速度为自变量的平均锯切功率回归公式。这些工作，不仅可以为这种冷锯机锯切功率的理论研究提供依据，还可直接为使用和设计这种冷锯机给出具体参考数据。     

A calibration method for the energy-integrating function in photovoltaic system monitoring

Solar radiation has an irregularly varying factor due to a basic day and night cycle and climatic conditions. For such conditions a data sampling interval is important to ensure the accuracy of energy monitoring in a photovoltaic system. While treating a system monitoring equipment as a black box. the author has developed the method of calibrating an energy-integrating function. At first for various input waveforms, the relationship between sampling intervals and quasi-integration outputs have been examined by trapezoidal rule. In the numerical simulation the phases of the sampling clock also are considered Then it is concluded that a sampling interval can be inspected through outside observation only by using a rectangular single pulse. By applying the pulse to the energy-integrating process, two kinds of integrated outputs can be obtained for different sampling phases. The calculated difference between both outputs can uniquely give the sampling interval being inspected. Conditions to ensure measuring accuracy are discussed and the validity of this method has been demonstrated experimentally. Practical calibrating procedures also are proposed for the integrating function of PV system monitoring.     

分布式光纤测温在动力电缆温度监测中的应用

动力电缆温度监测是可以及时发现电缆线路过热点位置和检测运行线路的绝缘状态,从而保障电缆安全稳定运行的技术措施。针对电缆过热事故的主要原因和特点,提出采用分布式光纤测温技术对电缆沿线温度进行监测预警,给出了分布式光纤测温系统的原理、组成和光缆布设方案,此系统对保证电力系统的安全运行有重要意义。     

传感器技术在智能变电站中的应用

介绍传感器技术在智能变电站中的应用,以及使用中的注意事项。     

冗余技术在维持DCS系统稳定运行中的作用

以浙江中控JX300-XP为例,介绍冗余系统在系统长周期运行中的关键作用。     

绥高#2线线路保护2动作分析

对高岭站2009年6月15日绥高#2线线路保护动作的原因进行深入分析,介绍处理措施。     

Authority updating: An expert authority evaluation algorithm considering post‐evaluation and power indices in social networks

In group assessment, the focus is on finding high‐authority experts to improve the reliability of assessment results. In this study, we propose an authority updating algorithm while considering the power and judgement reliability of an expert on the basis of social networks and post‐evaluations. A network power index is established and used to reflect the power of an expert while considering social networks. The measurement of the judgement reliability of an expert considers the post‐evaluation of the objects selected by experts, thereby more scientifically reflecting the reliability of experts. The analysis shows the following: although the social‐network structure influences the authority of experts, the influence weakens when the assessment group is a highly or even fully connected group; the network effect may increase the authority of some experts and reduce that of others, and it will weaken as the network connectivity increases; moreover, the judgement reliability and authority of an expert while considering post‐evaluation can encourage him/her to make fair assessments and strive to reduce his/her motivation and cognitive biases.     

乳化液泵站变频调速系统的设计

针对传统的乳化液泵站调速系统存在机械损耗比较大的问题,提出了一种乳化液泵站变频调速系统的设计方案;给出了该系统的硬件结构,详细介绍了该系统的工作模式及软件设计。实际应用表明,该系统运行稳定、机械损耗小。     

基于D-FNN的混沌铁磁谐振系统非线性补偿控制方法

针对电网混沌铁磁谐振系统产生的混沌现象,提出基于动态模糊神经网络的混沌铁磁谐振系统非线性补偿控制方法。该方法采用动态模糊神经网络来逼近系统的非线性部分,消除了过电压的混沌现象,将系统稳定到目标位置,实现了对系统的非线性补偿控制。Matlab仿真结果表明,基于动态模糊神经网络的非线性补偿控制方法控制结果正确,响应快速。     

矿用隔爆兼本质安全型不间断直流稳压电源的设计

基于本质安全型电源的原理及特点,提出了一种矿用隔爆兼本质安全型不间断直流稳压电源的设计方案,详细介绍了该电源主要电路的设计。该电源采用LM317可调稳压芯片实现稳压功能,具有使用方便、电路简单、变换效率高、成本低等优点。测试结果表明,该电源达到了本安标准,满足了安全型电气设备的需求。