Effects of the handle diameter and tip angle of chopsticks on the food-serving performance of male subjects

The effects of chopsticks handle diameter and tip angle on the food-serving performance of pinching food, pulling food, shearing food and thrusting food, were investigated in this study. A total of 24 male subjects was tested using 12 pairs of experimental chopsticks, consisting of three types of different handle diameters and four types of different tip angles. These results indicated that chopstick handle diameter and tip angle have a significant influence on eating efficiency, and that these two variables have a significant interaction. In addition, chopstick tip diameter also had significant effects on performance at the four tasks and subjective ratings. Generally, according to the results, when the chopsticks design is presented in terms of handle diameter, tip angle and tip diameter, a pair of chopsticks with 6 mm handle diameter × 2 ° tip angle × 4 mm tip diameter would be optimum.     

VA + Embeddings STAR: A State-of-the-Art Report on the Use of Embeddings in Visual Analytics

Over the past years, an increasing number of publications in information visualization, especially within the field of visual analytics, have mentioned the term “embedding” when describing the computational approach. Within this context, embeddings are usually (relatively) low-dimensional, distributed representations of various data types (such as texts or graphs), and since they have proven to be extremely useful for a variety of data analysis tasks across various disciplines and fields, they have become widely used. Existing visualization approaches aim to either support exploration and interpretation of the embedding space through visual representation and interaction, or aim to use embeddings as part of the computational pipeline for addressing downstream analytical tasks. To the best of our knowledge, this is the first survey that takes a detailed look at embedding methods through the lens of visual analytics, and the purpose of our survey article is to provide a systematic overview of the state of the art within the emerging field of embedding visualization. We design a categorization scheme for our approach, analyze the current research frontier based on peer-reviewed publications, and discuss existing trends, challenges, and potential research directions for using embeddings in the context of visual analytics. Furthermore, we provide an interactive survey browser for the collected and categorized survey data, which currently includes 122 entries that appeared between 2007 and 2023.     

数控机床操控器人机界面优化设计研究

目的控制器和显示器共同组成数控机床控制面板的整体界面,是机床接受与执行命令的交互平台。从人机交互角度,聚焦于控制器的界面布局进行优化设计。方法基于人机工程学理论的优化流程,采用现场访谈、现场观察等方法,将人机工程学的理论转化为具体考核指标。结论从人机工程学的研究角度出发,结合工业设计、用户体验设计学等内容,从功能区域分区、操纵器色彩设计等方面优化数控机床控制器的界面,提高系统整体效能及使用者满意度,为数控机床系统开发设计提供参考。     

Research Progress of Laminated Composite Ceramic Cutting Tools

The design of the lamination structure based on bionic shell pearl layer is a successful method for toughening ceramics. Lamination with strong bonding interfaces is used to improve the mechanical property and low fracture toughness of ceramic cutting tools. Based on the idea of demand–design–preparation–analysis–failure, the development and research progress of laminated ceramic tools are reviewed herein. The research status of design, interlayer diffusion reaction, residual stress, toughening mechanism, and crack propagation path of the biomimetic laminated ceramic composite tool materials is mainly introduced. The major topics of current research include the creation of material systems, the evolution of microstructure, and the assessment of macroscopic mechanical properties. The entire mechanical properties of laminated ceramic tools are significantly influenced by the multicomposition design of the ceramic material system and the optimization design of structural parameters of layer number and layer thickness ratio. However, the research on the practical cutting application of laminated ceramic tools is limited. Cutting tool wear characteristics vary between laminated and homogeneous ceramic tools. The development of useful laminated ceramic cutting tools can greatly benefit from the study on failure mechanisms of laminated ceramic tools.     

Rational Filters for Passive Depth from Defocus

A fundamental problem in depth from defocus is the measurement of relative defocus between images. The performance of previously proposed focus operators are inevitably sensitive to the frequency spectra of local scene textures. As a result, focus operators such as the Laplacian of Gaussian result in poor depth estimates. An alternative is to use large filter banks that densely sample the frequency space. Though this approach can result in better depth accuracy, it sacrifices the computational efficiency that depth from defocus offers over stereo and structure from motion. We propose a class of broadband operators that, when used together, provide invariance to scene texture and produce accurate and dense depth maps. Since the operators are broadband, a small number of them are sufficient for depth estimation of scenes with complex textural properties. In addition, a depth confidence measure is derived that can be computed from the outputs of the operators. This confidence measure permits further refinement of computed depth maps. Experiments are conducted on both synthetic and real scenes to evaluate the performance of the proposed operators. The depth detection gain error is less than 1%, irrespective of texture frequency. Depth accuracy is found to be 0.51.2% of the distance of the object from the imaging optics.     

The Origins of the Translator's Workstation

The first proposals for various component tools of what is now called the translator's workstation or translator's workbench are traced back to the 1970s and early 1980s in various, often independent, proposals at different stages in the development of computers and in their use by translators.     

A geometrical approach to computer-aided process planning for computer-controlled machine tools

This paper documents part of a research program which has been under way at the CIM Centre at Swinburne University of Technology since 1989. The purpose of the research program was to develop an open-architecture machine tool control system and then to see how that system could be used to change the distribution of traditional manufacturing design, planning and control functions. This paper examines one part of that research program and focuses on a methodology which could prove to be useful in the machine tool selection, cutter selection and cutter path generation phases of process planning for cutting operations on workpieces in computer-controlled machine tools.It is suggested that a configuration space transform be used for each cutter/machine tool combination to find the volume that the combination could remove from the uncut workpiece without removing any of the material that will form the final workpiece. A method of comparing these volumes from different combinations is then outlined. The output of this method is a reasonable sequence of machine tools and cutters. Path planning can then be carried out for each of the chosen combinations using a method similar to the one used to find the possible volume to be removed.Possible implementation techniques, and their limitations on existing computer hardware, are discussed and the most promising of these are identified, based upon some properties of configuration space transforms.     

多组合设备的调度控制研究综述

在半导体芯片制造中越来越广泛使用多组合设备.本文介绍了多组合设备的结构配置、生产运行过程、调度控制问题的一般特征条件、应该满足的约束及周期性调度策略;分析了问题的复杂性因素.从多组合设备的结构特征、运行过程特征两方面分类综述了调度问题的建模、分析方法、调度算法及存在的问题,最后指出了未来的研究方向.     

Automatic 3D model reconstruction of cutting tools from a single camera

Collision detection by machining simulation requires the 3D models of rotating cutters. However, the 3D models of a cutter and holder are not always available. In this paper, a new method is proposed to design an automatic vision-based 3D modeling system, which is able to quickly reconstruct the 3D model of a cutter and holder when they are installed onto the spindle. Only a single camera is mounted on the machine tool to capture the image of the rotating cutter and holder. By viewing the rotating cutter and holder as an object of surface of revolution, the contour of the imaged cutter and holder can be used to reconstruct the 3D model as a stack of circular cross-sections. Then the complete generating function of the cutter and holder can be recovered from the cross-sections. Finally, the 3D model of the cutter is built by rotating the generating function around the spindle axis. The effectiveness and accuracy of the proposed method are verified by experiments on-machine using 12 kinds of cutters and holders, which can satisfy the requirement of collision detection.     

Linear complete differential resultants and the implicitization of linear DPPEs

The linear complete differential resultant of a finite set of linear ordinary differential polynomials is defined. We study the computation by linear complete differential resultants of the implicit equation of a system of n$n$ linear differential polynomial parametric equations in n−1$n-1$ differential parameters. We give necessary conditions to ensure properness of the system of differential polynomial parametric equations.