Real-time accurate hand path tracking and joint trajectory planning for industrial robots (I)

Previously, researchers raised the accuracy for a robot’s hand to track a specified path in Cartesian space mainly through increasing the number of knots on the path and the number of the path’s segments, which results in the heavier online computational burden for the robot controller. Aiming at overcoming this drawback, the authors propose a new kind of real-time accurate hand path tracking and joint trajectory planning method. Through selecting some extra knots on the specified hand path by a certain rule and introducing a sinusoidal function to the joint displacement equation of each segment, this method can greatly raise the path tracking accuracy of robot’s hand and does not change the number of the path’s segments. It also does not increase markedly the computational burden of robot controller. The result of simulation indicates that this method is very effective, and has important value in increasing the application of industrial robots. Foundation item: Foundation of the Robotics Laboratory, Chinese Academy of Sciences (No. RL200002) Biography of the first author: TAN Guan-zheng, Dr., professor, born in Oct. 1962, majoring in artificial intelligence, robotics and automation.     

塔式烘干中心干燥控制系统采样数据的实时性

传统的干燥控制系统思维方式是把干燥流程看成是一个大的惯性场，以惯性的形态看待与过程相关的数据，对输入参数的过程实时性很少研究，这样的结果就是控制准确性、精确度与实际过程的吻合程度较差。拟从干燥系统输入体系的结构入手，采用时序分析的手法对入粮到干燥的传输时序进行解析，推理出动态实时数据模型。     

A process-control and diagnostic tool based on continuous fuzzy Petri nets

The use of Petri nets and fuzzy logic in intelligent process control has caught the attention of many researchers. In this paper, a Continuous Fuzzy Petri Net (CFPN) tool which integrates the three technologies of fuzzy control, Petri nets and real-time expert systems is presented. The CFPN approach can deal with real-time continuous inferencing, for the purpose of process monitoring and diagnostics, at a high level in the presence of uncertainty. This tool has been implemented in the G2 real-time expert-system environment and is currently being used by ESSO Canada.     

液压激振系统的检测与控制

本文阐述一种用于控制液压激振装置加载力和加载频率的机液电系统。简要叙述液压激振器的基本原理和特点。分析了双闭环控制回路。重点介绍激振力和激振频率的检测和处理技术。     

A real-time planning algorithm for obstacle avoidance of redundant robots

A computationally efficient, obstacle avoidance algorithm for redundant robots is presented in this paper. This algorithm incorporates the neural networks and pseudodistance function D _p in the framework of resolved motion rate control. Thus, it is well suited for real-time implementation. Robot arm kinematic control is carried out by the Hopfield network. The connection weights of the network can be determined from the current value of Jacobian matrix at each sampling time, and joint velocity commands can be generated from the outputs of the network. The obstacle avoidance task is achieved by formulating the performance criterion as D _p>d _min (d _min represents the minimal distance between the redundant robot and obstacles). Its calculation is only related to some vertices which are used to model the robot and obstacles, and the computational times are nearly linear in the total number of vertices. Several simulation cases for a four-link planar manipulator are given to prove that the proposed collision-free trajectory planning scheme is efficient and practical.     

专用设备驱动程序交互式生成器的设计与实现

主要作为电子高科技的重点领域，专用实时设备无论类别和型号，抑或数量和质量，均与日俱增，令人目不暇接。它们的高效管理与灵活加接，是任何计算机专用实时系统不可或缺的基本功能，其驱动模块随之成为任何专用实时系统无法回避的设计难点。本文介绍我们自行研制的专用实时设备驱动程序交互式生成器ＲＴＤＧ的设计与实现。     

一种面向车辆实时数据并行处理的任务调度算法

车辆实时监管正面临着不断增长的大规模车辆监测数据的实时处理需求,需要采用分布式的并行计算架构来提升大规模车辆监测数据处理的性能,支撑多样化的车辆监测数据处理任务,应对支撑环境的伸缩性需求。在这种架构下,对系统中不同计算节点间的车辆监测数据处理任务的调度提出了更高的要求。针对这一要求,并结合流式到达及历史积累的车辆监测数据的持续化处理需求以及大规模车辆监测数据实时处理中内存敏感的特征,提出一种基于路由表的并行任务调度算法。该算法基于车辆监测数据时空属性以及各计算节点的内存信息建立路由表,并以路由表的形式来进行任务的并行划分和分配调度,从而使得各计算节点达到负载均衡的状态。实验表明该算法能够使计算节点间的负载差异缩小到12%以内。此外,该算法在某市车辆监管实时系统中的实际应用也证明了其有效性。     

3G技术在地震网络系统的安全应用价值探析

从地震的发生频率上来看,我国是一个多发的国家。同时在地震中由于受到各种灾害而引起的损失也是最严重的。所以,对地震的信号进行实时性监测并完成信号数据的快速传输必须要应用先进的技术手段。文章主要介绍的就是目前应用十分广泛的3G技术在地震的网络系统中的安全应用。     

NCS中实时数据库的多版本并发控制研究

实时数据库是网络控制系统(NCS)的重要组成部分,是整个控制系统中数据交换的平台。本文在原有的两段锁机制的基础上,提出一种适用于多版本的两段锁并发控制方法。简述数据多版本给现场控制带来的不利影响。分析在数据多版本的情况下,现场事务的可串行性,用多版本并发控制协议MV2PL解决多版本并发控制问题。用简化的多版本并发协议2V2PL说明它的正确性,并通过实例表明该协议是可行的。