溶胶-凝胶法制备TEOS-DOS基SiO2疏水减反射膜:溶胶微结构对膜性能的影响

以乙醇为溶剂,正硅酸乙酯(TEOS,tetraethoxysilane)在氢氧化铵催化下水解缩聚为纳米尺度的无定型SiO2溶胶颗粒,二甲基二乙氧基硅烷(DDS,dimethyldiethoxysilane)在盐酸催化下水解缩聚为线状聚二甲基硅氧链.用混合溶胶在玻璃基片上旋转镀膜,然后于80℃空气气氛下热处理.实验证明通过DDS将疏水的双甲基链引入镀膜胶体,使膜兼具疏水性和减反射性能.利用激光散射粒度分析仪和电子显微镜研究了溶胶颗粒的粒度变化和聚集情况等溶胶微结构,用物理吸附仪研究了膜的孔结构,考察了热处理前后膜的疏水性和透射谱,得到了溶胶微结构与膜性能之间的关联.     

12864-12 LCD模块与射频SoC nRF9E5的串行接口设计

本文首先介绍一种具有2位或3位串行、4位或8位并行多种接口方式，内部含有国标一级、二级简体中文字库的图形点阵液晶显示模块12864-12，以及该模块的技术特性、串行接口方式和操作指令。然后介绍射频片上系统nRF9E5的片内微控制器结构与其接口资源，给出在无线数据传输系统中12864-12与nRF9E5串行连接的硬件电路和部分程序。最后，论述了该方案的优点。     

Software‐processed edge‐ and level‐adaptive overdrive (SELAO) method for high‐quality motion pictures

Abstract— In this paper, a software‐processed edge‐ and level‐adaptive overdrive (SELAO) method, which is a novel overdrive technique that utilizes not only a temporal change of gray levels but also a spatial edge intensity of motion pictures, is proposed. The SELAO method is a software video‐processing technology to improve motion‐picture quality rendered on LCDs more than is possible with a conventional SLAO method without edge‐adaptive overdrive, and it works in real time on commonly used personal computers (PCs).     

液晶显示器件工作特性模拟软件

介绍笔者新近研制成功的向列相液晶显示器件工作特性模拟软件VISUAL LCD.VISUAL LCD适用于TN、STN、FSTN等多种液晶显示器的模拟计算,可给出液晶指向矢分布、电光曲线、视角、动力学响应等.VISUAL LCD计算精度高,功能强,用户界面友好、美观,使用方便、可广泛应用于LCD的研究和生产.     

TFT LCD的过压驱动技术探讨

过压驱动技术是提高液晶显示器响应速度的关键技术之一。文章分析了TN型TFT液晶显示的原理及影响响应时间的因素,探讨了过压驱动的原理和系统结构,对灰阶亮度上升和下降两种状态下的应用进行了说明。对液晶显示系统进行了实验分析以及响应时间的测量,结果表明通过过压驱动可以在很大程度上提高液晶显示器的响应时间,有效改善显示画面的动态模糊问题。在0℃的环境温度下,最大灰阶响应时间不超过80ms。     

EMD消噪在取样光栅滤波器设计中的应用

通过改变取样光栅的各参数来仿真其反射谱,调试出四种基于取样光纤光栅的光学梳状滤波器。为了优化取样光栅梳状滤波器功能,提出了利用经验模态分解对信号进行滤波分析和降噪处理的方法。该方法是将经验模态分解得到的固有模态函数,分为信号分量起主导作用模态与噪音分量起主导作用模态,去除噪音分量起主导作用模态,并利用反映信号主要结构的模态对信号进行重构实现去噪。文中最后以一种含噪声的反射谱为例,进行降噪后得到平滑的反射谱。     

基于tinyAVR和Nokia3310 LCD的温度绘图仪

采用14引脚封装的tinyAVR单片机、广泛应用于手机中的液晶显示模块Nokia3310LCD和深受欢迎的单总线3引脚数字温度传感器DS18B20,构建了一款具备实用性和趣味性的,既可读数、又可读图的双模式温度绘图仪。     

Fast full‐color reflective display via photoluminescent enhancement

Reflective displays are advantageous in applications requiring low power or daylight readability. However, there are no low‐cost reflective technologies capable of displaying bright colors. By employing photoluminescence to more efficiently use ambient light, we created a prototype display that provides bright, full color in a simple, low‐cost architecture. This prototype includes a novel electrokinetic shutter, a layer that incorporates patterned luminescent red, green, and blue sub‐pixel elements, and a novel optical out‐coupling scheme. The luminescent elements convert otherwise‐wasted portions of the incident spectrum to light in the desired color band, resulting in improved color saturation and lightness. This prototype provides a color gamut that is superior to competing reflective display technologies that utilize color filters in single‐layer side‐by‐side sub‐pixel architectures. The current prototype is capable of switching in <0.5 s; future displays based on an alternative electro‐optic shutter technology should achieve video rate operation. A transflective version of this technology has also been prototyped. The transflective version utilizes its backlight with a power efficiency that is at least three times that of a conventional liquid crystal display. These photoluminescence‐based technologies enable a host of applications ranging from low‐power mobile products and retail pricing signage to daylight readable signage for outdoor advertising segments.     

基于单片机的多功能充电器的设计与实现

本课题主要研究基于单片机的多功能充电器,解决对不同电池的快速充电。通过对ATmega8的深入研究,利用它的高性能,设计完全实现了电池充电器设计的功能。本设计可以通过按键切换,对的密封铅酸电池(SLA)和镍镉电池(NiCd)进行充电,并通过LCD清楚地看到其充电状态。同时利用放大电路和Atmega8本身的AD转换器显示对电池电压和电流的实时测量,以较好的控制充电过程,保护电池。