基于分水岭和区域合并的图像分割算法*

提出一种应用分水岭与区域合并相结合的图像分割算法.本方法首先利用数学形态学分水岭算法对图像进行分割,然后对分割后的图像进行相似区域合并,以减少分水岭方法产生的过分割现象,从而得到较好的分割效果.     

填隙Ti2Ni相形成条件的模式识别分析

在多维键参数空间中对填隙Ti_2Ni相化合物的形成条件做模式识别分析,由于前过渡金属原子组成的八面体空穴中填入C,N.O原子使Ti_2Ni结构稳定化,此结构的分布区扩大,邻近的Al_2Cu,MoSi_2结构分布区减小。     

关于贝氏体形核和台阶机制的讨论--与徐祖耀院士等商榷

一些合金固溶化(或淬水)后在预贝氏体(孕育)期内等温淬火(或时效)，既保持高温时形成的晶体缺陷，又产生新的晶体缺陷。母相中由于溶质原子扩散而在缺陷处发生偏聚，则形成贫／富溶质微区，即类拐点(spinoclal—like)分解。当贫溶质微区成分作为Ms，其温度等于或高于等温淬火(或时效)温度时，贝氏体将以马氏体样切变形核，故贝氏体是在溶质原子扩散控制下切变形核。在TEM温台试验中未发现台阶生长机制，界面上巨型台阶是贝氏体增宽(厚)速度差异所致。     

含水量对渠道保温板保温耐久性的影响及保温板厚度设计

北方渠道大多使用保温板防止混凝土衬砌受冻胀破坏。在计算保温板厚度时为了降低成本,容易忽略保温板使用过程中受各种因素的影响导致保温效果变差的情况,使混凝土衬砌达不到设计使用年限便提前被破坏。内蒙古河套灌区试验结果表明,由于受酸雨、冻融作用、含水量等因素的影响,保温板保温效果平均每年降低0.9℃,其中受含水量变化的影响最大。经试验测得:聚苯乙烯保温板(EPS)含水量每增加1%,会导致导热系数增大5%。基于多层材料串联热阻叠加原理和热阻等效原理,对保温板厚度计算公式进行完善,并提出相应的铺设方法和施工技术要求。该设计对保温板在季节性冻土区的推广应用具有一定参考价值。     

An architectural design for effective information retrieval in semantic web

The current web IR system retrieves relevant information only based on the keywords which is inadequate for that vast amount of data. It provides limited capabilities to capture the concepts of the user needs and the relation between the keywords. These limitations lead to the idea of the user conceptual search which includes concepts and meanings. This study deals with the Semantic Based Information Retrieval System for a semantic web search and presented with an improved algorithm to retrieve the information in a more efficient way.This architecture takes as input a list of plain keywords provided by the user and the query is converted into semantic query. This conversion is carried out with the help of the domain concepts of the pre-existing domain ontologies and a third party thesaurus and discover semantic relationship between them in runtime. The relevant information for the semantic query is retrieved and ranked according to the relevancy with the help of an improved algorithm. The performance analysis shows that the proposed system can improve the accuracy and effectiveness for retrieving relevant web documents compared to the existing systems.     

A binary approximating method for graspable region determination of biped climbing robots

For a biped pole-climbing robot (BiPCR) with grippers, it is an essential demand to determine the target grasp configuration for climbing and transiting between poles, with the graspable region as a priori knowledge. The graspable region on the target pole is critically important for climbing path planning and motion control. To efficiently compute the graspable region for a BiPCR, we propose a novel binary approximating method in this paper. This method may also be applied to generate the three-dimensional (3-D) workspace of a manipulator with constant orientation. The grasping problem and the concept of graspable region for a BiPCR are first introduced. The binary approximating method and the corresponding algorithms are then presented to generate the graspable region. Additional constraints on a biped climbing robot with five degrees of freedom (DoFs) are presented as a supplement to the algorithm. A series of comprehensive simulations are conducted with the five-DoF and six-DoF climbing robots to verify the effectiveness of the proposed method. Finally, the dexterity of biped climbing robots with different DoFs is discussed.     

结合相关规则和本体加权图的查询扩展

针对现有信息检索系统查询性能的不足,提出了一种结合相关规则和WordNet本体信息的查询扩展方法.该方法借助相关规则挖掘和WordNet本体信息构建加权词语关系图,并根据加权图的结构和权重信息计算扩展词的重要性.查询时,从这个图中取原查询词的最邻近词作为扩展词来源,选取其中权重最大的p个词返回并进行二次检索.在实现算法的基础上,通过Lucene全文检索器进行实验,将所得的结果值F1与其他算法的结果作比较.比较结果表明,该方法比不作扩展的检索有约16.93％的性能提升.     

串联感应加热电源相角保护

数字感应加热电源在工业中一般采用串联负载与PFM调功方式。串联负载谐振与PFM调功方式要求逆变器频率稳定工作在感性区,但在实际工作过程中逆变器频率可能会由感性区越过谐振点滑入容性区,引起逆变器发生"炸管"现象。为了防止"炸管"现象的发生,在谐振点附近的感性区设置限相区,当频率进入限相区经PI处理使其稳定工作在感性区达到保护逆变器的目的。通过DSP实验平台测试,限相区的设置可以很好的保护逆变器使其稳定工作在感性区。     

基于区域权函数理论的多电极电磁流量计电极设计

基于Shercliff权函数提出区域权函数概念,设计多电极电磁流量计,通过测量管道截面不同位置的弦端电压,计算各区域的轴向平均速度,实现速度分布与体积流量的测量。着重研究了流量计电极设计,选取不锈钢平头方案的多电极电磁流量计,对于阀门下游的非轴对称单相流体积流量测量精度高于±1.0%,倾斜管固—液两相流实验证明:该设计对于两相流非轴对称的速度分布测量具备可靠性。     

融合查询扩展和动态匹配的集外词检测

目前关键词检测面临的一个主要挑战是集外词问题。由于集外词发音的不确定性导致其检测性能与集内词相差很多。对此,本文提出了一种融合查询扩展和动态匹配的方法来改善集外词检测的性能。首先比较了基于联合多元模型的查询扩展和基于最小编辑距离的动态匹配。考虑到二者潜在的互补性,采用两种融合方法：一种方法是结果融合,分别应用查询扩展和动态匹配并行的检测集外词,然后合并检测结果;另一种是置信度融合,融合最小编辑距离和发音得分构成混合置信度进行集外词的检出与确认。实验结果表明,第二种融合方法的效果更好,系统的品质因数相对提升了19.8%。