引水工程大流量渡槽结构型式选择

针对工程等级高、过水流量大、抗震设防要求高的引水工程,渡槽结构型式选择存在工程技术难题,根据引水工程渡槽槽墩较高、荷载大、结构断面大、沉降变形影响因素较为复杂特点,进行了渡槽支承型式、槽身截面形式、渡槽墩身的比选。结果表明:简支结构具有减少施工难度和不均匀沉降对槽体结构应力影响,简化结构受力条件,简支结构较为有利优点。空心重力墩具有节省材料,充分利用材料强度,刚度较大,墩身质量较轻,抗震能力和抗冲击强,高度较大优点,对类似工程设计具有参考意义。     

高分子水处理剂的绿色化研究进展

简要介绍了近年来水处理领域在高分子水处理剂产品及生产工艺方面的绿色化研究进展状况。     

化学接枝法制备腻子型吸水膨胀橡胶研究

吸水膨胀橡胶是一种新型的功能高分子材料,过去多用机械共混的方法制备,但是这种方法存在着反复使用性能差的缺点,针对这个问题,本实验采用过硫酸铵/硫代硫酸钠氧化还原引发体系,有效地使丙烯酸钠单体与天然胶乳接枝共聚,制备出吸水倍率相当高的腻子型吸水膨胀天然橡胶。实验结果表明:反应温度、引发剂用量对吸水倍率和接枝率有明显的影响,单体用量对吸水倍率影响较大;反复吸水能力基本保持不变。     

Synthesis and characterization of superabsorbent hydrogels composites based on polysuccinimide

A kind of novel superabsorbent hydrogel with high swelling ratio property that could be used for the development of water absorbing resin, soil water retention agent, and chemical sand‐fixing material was synthesized in this study. The hydrogels were prepared by the crosslinking reaction of polysuccinimide (PSI). The relationships between swelling ratio and volume of solvent as well as the concentration of crosslinking agent were investigated in detail. Several composites, such as starch, carrageenan, and polyacrylamide, were added into hydrogels to enhance the swelling ratio. It was found that the swelling ratio was significantly increased, which the maximum water absorbency was enhanced 2.46 times when the composite polyacrylamide (PAM) was added compared to the control. The effects of ionic strength and sensitivity of pH on hydrogels were also studied. The modified hydrogels products with swelling ratio less sensitivity to the salinity as well as relative high swelling ration in salinity system were also obtained by adding PAM. Through the Fourier transform infrared spectroscopy (FTIR) characterizations, the crosslinking reaction mechanism and the structure of composite were proposed. In addition, the transmission electron microscopy (TEM) examinations showed that some composite materials elevated the physical crosslinked and connected channels density substantially. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 550–557, 2006     

颗粒活性炭的特性参数与吸附性能的关系试验

采用活性炭进行饮用水的深度处理,选择适合原水水质的活性炭至关重要,通过6种不同颗粒活性炭特性参数的测试,对饮用水有机物的吸附试验以及吸附等温线的测定,结果表明:针对颗粒活性炭的筛选,碘值,亚甲蓝值,吸附等温线的KF及斜率1/n值均不能单独作为评价筛选活性炭优劣的指标,而应综合考虑颗粒活性炭的孔径分布与原水中有机物的相对分子质量分布相匹配等。研究还表明:碘值,亚甲蓝值,吸附等温线的KF存在一定的相关性,从颗粒活性炭的特性参数和吸附性能参数可以推测活性炭滤柱试验吸附效果。颗粒活性炭用于饮用水深度处理,能去除水中相对分子质量小的有机物,处理的水量为颗粒活性炭体积的4800倍时,对CODMn的去除率为15%左右。     

Influence of the pH of Water on its Electron-Accepticity and Donicity

By means of contact angle measurements on dry layers of electrostatically neutral dextran with pure water (pH 6.1), water acidified with HCl (to pH 1.94) and water made alkaline with NaOH (to pH 12.8), it could be shown that there was essentially no change as a function of pH in the ratio of γ⁺/γ^- of water as compared with the aqueous acid and alkaline solutions. (Here γ⁺ is the Lewis acid parameter of the polar surface tension component of water and γ^- is its Lewis base parameter). In contrast, with contact angles measured with the same liquids on negatively charged clean glass, a significant decrease in contact angle was observed with water at pH 12.8, which was caused by the fact that at this alkaline pH an increase in surface hydrophilicity took place. This is because surfaces that have a given surface electrical potential at neutral pH generally acquire an even higher surface potential under more alkaline conditions which, concomitantly, also gives rise to an increase in surface hydrophilicity, and thus to lower contact angles with water. Finally, contact angles with acid water, pure water, and alkaline water, deposited on hydrophobic Parafilm surfaces, were exactly the same.     

Physical characteristics of sweet potato pulp/polycaprolactone blends

Sweet potato pulp (SSP) obtained as a by‐product from starch extraction was blended with polycaprolactone (PCL) to prepare a biodegradable plastic material. In the blends, PCL was used as a reinforcing agent. The SPP/PCL blends were prepared by compression‐molding under high temperature and pressure, at different SPP/PCL ratios, and the mechanical properties of the molded specimens were tested. Matrix structure and thermal properties were measured by using a Fourier transform infrared (FTIR) spectrophotometer, scanning electron microscope (SEM), differential scanning calorimetry (DSC), and thermogravimetric analyzer (TGA). Mechanical properties (tensile and flexural properties) were also measured to find the most suitable ratio in a SSP/PCL blend. During compression molding of the SPP/PCL blends under high pressure and temperature, chemical reaction occurred between SPP and PCL, and thus, thermal stability and mechanical strength of the blends increased and water uptake decreased. Also, by increasing the PCL content in the blend, the matrix in the blend became more homogeneous, and consequently, mechanical strength of the molded specimen increased. At 7/3 or 6/4 weight ratio of SSP/PCL, water uptake of the molded specimen became substantially less than that at 8/2. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 861–866, 2004     

新型碳质催化剂用于NH3选择性催化还原NOx的研究

以城市污水处理厂剩余污泥为原料制备了一种新型碳质催化剂。通过试验考察了催化剂在NH₃选择催化还原NO中的应用效果。结果表明,催化性能较好，最佳的制备和催化反应条件为：锌铁物质的量比1∶0.5，热解温度750 ℃，反应温度400 ℃，O₂浓度15%。在此条件下，NOx的最大转化率达98.3%。通过考察证明催化剂自身具有一定的还原性能。对催化剂进行了FTIR、TG、SEM和BET分析，结果表明，催化剂具有很丰富的孔结构、活性粒子和表面官能团，比表面积较大，最大可达307 m²·g^-1，分析结果显示具有良好的催化条件。     

Curing process of powdered phenol–formaldehyde resol resins and the role of water in the curing systems

The curing behavior of two kinds of commercial powdered resol phenolic resins was studied by differential scanning calorimetry. Liquid‐state ¹³C‐NMR spectroscopy was used to aid in understanding the curing behavior by detecting the structure of powdered resins. The reaction mechanism was interpreted with the dependency of activation energy on the degree of conversion. The results indicate that there are differences in the curing mechanism between core and face phenolic resins. The curing process of core resin was faster than that of face resin at the same reaction temperature. The water added in the curing system played an important role of plasticizer or diluent according to different curing stages and water content. In the initial curing stage, water mainly diluted the system and retarded the curing reactions. However, at the higher degrees of conversion, water played the role of plasticizer to decrease the effect of diffusion on the curing reactions to make the curing reactions more complete. The excess water added in the curing system played the role of diluent at almost all stages during the curing process. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1371–1378, 2003     

Modeling and global trajectory tracking control for an over-actuated MAV

This paper deals with an original micro aerial vehicle (MAV) design, the Omnicopter MAV. It has two central coaxial rotors with fixed-pitch propellers and three perimeter mounted ducted fans with servo motors performing thrust vectoring. Compared with traditional rotary wing MAVs that have inherent underactuation, the Omnicopter possesses some advantages in mobility, for example, lateral translation with zero attitude and hover with nonzero attitude. The trajectory tracking control design, global stability analysis, and control allocation are demonstrated through numerical simulation. The advantage of zero attitude translation is illustrated through experimental results.