橡胶挤出机平均温差分析与计算

从理论上推导挤出机平均温差的计算公式，并指出与一般换热器平均温差计算的异同。     

Prediction of fatigue behaviour in stress-concentrators of arbitrary geometry

A new method is outlined which aims to predict high-cycle fatigue behavior of components which fail from stress-concentrators. This involves examination of the stress field in the vicinity of the stress-concentrator, and comparison with stress fields for cracks at known stress intensities. Methods which are currently used for simple notch geometries can thus be generalised, making the approach applicable to stress concentrators of any geometry. The method of prediction is shown to be stable, providing a solution of good accuracy when compared to analytical methods for standard specimen geometries. Favourable comparisons with experimental data have been achieved both for standard notches and for a corner geometry which represents a typical component case.     

Stress analysis with arbitrary body force by boundary element method

Linear stress analysis without body force can be easily carried out by means of the boundary element method. Some cases of linear stress analysis with body force can also be solved without the domain integral. However domain integrals are generally necessary to solve the linear stress problems with complicated body forces. This paper shows that the linear stress problems with complicated body forces can be solved approximately without the domain integral. In order to solve these problems, the domain is divided into small areas using contour lines of body force. In these areas, the distributions of body force are assumed approximately to satisfy the Laplace equation.     

横观各向同性土介质与结构物共同作用的有限元与边界元耦合分析

本文采用有限元与边界元耦合方法对上与结构物进行共同作用的分析．其中上部结构采用有限元子结构法，地基上考虑为横观各向同性特性，应用边界元法，通过基础界面上位移连续、面力平衡的条件进行耦合分析．编制了相应的计算程序，对某高层空间剪力培与地基的共同作用进行了计算，与有限元法和实测结果进行了对比分析，得到了满意的结果．说明：有限元和边界元的耦合方法能充分发挥两者的优越性，不失为共同作用分析的一种有效途径．     

安全壳钢衬的初始后屈曲分析

基于Ｄｏｎｎｅｌｌ的非线性板壳理论，认为钢衬壳是一种有特殊缺陷形状的钢衬板，用初始后屈曲渐进分析理论，研究了在温度应力作用下缺陷钢衬板即钢衬壳的初始后屈曲性态。计算了一个四点铆固钢衬壳模型，同时给出了铆钉间距等参数对钢衬壳屈曲极值温度的影响。     

铜及铜合金中铜量分析方法综述

现行标准ＧＢ５２３１－ＧＢ５２３５－８５中共有８８个合金牌号要求测定铜量，其含铜量从５３％到９９．９７％以上。本文就ＩＳＯ、ＧＢ和主要铜材生产企业分析规程中铜量测定方法，结合本人的实践经验进行综述。     

激光微区光谱定量分析及其在激光晶体研究与检验中之应用

本文概括介绍了激光微区光谱定量分析激光晶体中掺元素浓度的研究成果，着重讨论了定量分析中的几个主要问题。     

快中子零功率反应堆(DF-VI)的临界事故概率分析

本文应用故障树分析方法,对快中子零功率堆(DF-Ⅵ)在启动过程中发生临界事故的可能性做了初步的定量估计。结果表明,该堆每次启动发生临界事故的概率约为10~(-6)量级,得出确保装置启动安全的首要因素是选配合格的操作人员的结论,并对设备的改进提出了一些建议.     

On-Line File Caching

Abstract. Consider the following file caching problem: in response to a sequence of requests for files, where each file has a specified size and retrieval cost , maintain a cache of files of total size at most some specified k so as to minimize the total retrieval cost. Specifically, when a requested file is not in the cache, bring it into the cache and pay the retrieval cost, and remove other files from the cache so that the total size of files remaining in the cache is at most k . This problem generalizes previous paging and caching problems by allowing objects of arbitrary size and cost, both important attributes when caching files for world-wide-web browsers, servers, and proxies. We give a simple deterministic on-line algorithm that generalizes many well-known paging and weighted-caching strategies, including least-recently-used, first-in-first-out, flush-when-full, and the balance algorithm. On any request sequence, the total cost incurred by the algorithm is at most k/(k-h+1) times the minimum possible using a cache of size h ≤ k . For any algorithm satisfying the latter bound, we show it is also the case that for most choices of k , the retrieval cost is either insignificant or at most a constant (independent of k ) times the optimum. This helps explain why competitive ratios of many on-line paging algorithms have been typically observed to be constant in practice.     

舰船用断路器抗冲击欠压脱扣器的设计

对断路器的欠压脱扣器结构进行分析和研究 ,采用平衡机构、弹性球效应等抗冲击设计方法 ,并通过理论计算和验证 ,将H—DW14舰船用断路器的欠压脱扣器设计成具有抗冲击能力的产品 ,以适应舰船的要求。