Adhesion Effects of Intermediate Layers on the Densification of Ceramic Powders

In the ceramic technology the first step to produce sintered bodies is the manufacturing of powders which then are densified. The adhesion mechanisms between the single particles and the agglomerates produced from them determine the densification process. Starting from theoretical considerations adhesion mechanisms, such as solid bridge formation, adhesive bonding and glide-promoting effects, are discussed in principle. Subsequently, the effects of surface-active substances on the densification behaviour of clay-ceramics and oxide-ceramic bodies are discussed. Further, the evaluation of the action of additives to the powder mixtures on the microstructure of the compacts, such as porsity and texture, leads to a compaction equation which describes the transition from the powder pile to a densified green body.     

纤维素科学与技术研究进展

本文综述纤维素科学与技术的研究进展。阐述了纤维素结构、纤维素的合成、纤维素液晶、功能纤维素、纤维素溶剂、纤维素裂解和纤维素的废物利用等的最新动态。     

Composites based on eucalyptus tar pitch/castor oil polyurethane and short sisal fibers

Polymeric materials are being developed with renewable resources to promote industrial progress with environmentally friendly technologies. For this reason, polyurethane samples were prepared with 4,4′‐diphenylmethane diisocyanate (NCO/OH = 1), eucalyptus tar pitch (biopitch), castor oil as a polyol, and dibutyltin dilaurate as a catalyst. These materials were reinforced with different contents of short sisal fibers (0, 2.5, 5.0, 7.5, and 10.0%) and were prepared by resin‐transfer molding. The composites were characterized by IR absorption spectroscopy, thermal analysis (thermogravimetry and differential scanning calorimetry), impact resistance, scanning electron microscopy, and water absorption resistance. These materials showed hydrophobic characteristics, despite the addition of sisal fibers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3797–3802, 2003     

浅谈C语言中循环结构的教学--回答好循环结构的“三个问题”

循环结构是C语言程序设计中的重难点,其掌握情况对于后续章节的学习效果尤为关键。本文以什么是循环、何时需要使用循环以及如何使用循环三个问题为主线,通过精心选择的教学案例和灵活有效的教学方法来进行解答,以激发学生兴趣,培养编程思想。     

Structure and properties of polyimide‐bonded magnets processed from prepolymers based on diacetyl derivatives of aromatic diamines and dianhydrides

We report a novel method of polyimide (PI) synthesis from prepolymers based on dianhydrides and diacetyl derivatives of aromatic diamines that facilitate the preparation of a melt processable mixture at 300 ± 10°C of the prepolymer and magnetic Nd‐Fe‐B alloy to provide PI‐bonded magnets with enhanced properties. It is shown that chemical structure of the prepolymers strongly influences viscosity behavior via crystallization of the oligoimide in the melt, leading to formation of PI with rigid‐rod like structure. This structural ordering of the prepolymers based on diacetyl derivative of diamine used in this study, if not controlled, leads to exponential increase of melt viscosity with time, making it practically impossible to prepare melt processable mixture of the magnetic particles and the PI prepolymers at elevated temperatures. The results obtained demonstrate that appropriate dianhydrides and diacetyl derivatives of diamines that do not lead to crystallization of oligoimides in prepolymer mixture can be used under controlled processing conditions to prepare melt‐processable PI‐bonded magnets containing rigid‐rod like PI structure that significantly increases thermal stability of the magnets. The temperature dependencies of the magnetic properties of the PI‐bonded magnets under conditions that they are likely to encounter during their service life were found to be remarkably similar to that of commercial thermoplastic magnets such as injection‐molded nylon magnets. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 478–485, 2006     

聚醚型聚氨酯的氢键、微相分离及性能

用本体一步法合成了5种不同硬段含量(11.0％～46.9％)的二苯甲烷-4,4′-二异氰酸酯/环氧乙烷封端型聚环氧丙烷聚醚/乙二醇的聚醚型聚氨酯,并借助于IR,DSC,DMS和材料试验机等手段对该聚氨酯的氢键、微相分离及力学性能进行了表征。结果表明:随着硬段含量的增加,其>NH与微区中的>C=O的氢键化程度逐渐提高,软段微区中—O—的氢键化程度逐渐降低;微相分离程度逐渐提高;拉伸强度及硬度随之增加,扯断伸长率在硬段含量40％左右出现极大值。     

Structure of resorcinol,phenol, and furan resins by MALDI‐TOF mass spectrometry and 13C NMR

The structure of traditional, linear phenol–resorcinol–formaldehyde (PRF) resins, urea‐branched PRF resins, and phenol–resorcinol–furfural (PRFuran) resins has been investigated in depth by both matrix‐assisted laser desorption/ionization time of flight (MALDI‐TOF) mass spectroscopy and ¹³C NMR. The structure of a variety of oligomers has been obtained, and the structures present in each of the three types of resins related to the very different percentages of resorcinol needed for their equal performance as adhesives. The oligomers type and species distribution appeared very different for each case. PRF resins performance is improved by maximizing either the proportion of resorcinol‐containing oligomers or methylol‐groups containing oligomers, even without any resorcinol, or both. It is equally obtained by the minimization of the relative proportion of the low reactivity Phenol (CH₂ Phenol) species in which resorcinol is not present, this being the most important parameter. This can be obtained by more effective use of the resorcinol by just modifying the resin manufacturing procedure. This parameter instead does not appear to be determinant in PRFuran resins. In these, it is the higher molecular weight of furfural in relation to formaldehyde that engenders for the same manufacturing procedure a correspondingly lower proportion of resorcinol in the resin. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2665–2674, 2004     

聚合转化率对硫调型氯丁胶结构与性能的影响

研究了硫调型氯丁橡胶乳液聚合中转化率对产晶结构与性能的影响.结果表明,随单体转化率的提高,聚合物的凝胶量及其交联密度增大,致使断链速度减慢,所得断链胶的门尼粘度上升,残存凝胶量增加,分子支化程度增大,分子量分布变宽,焦烧时间缩短。而相应硫化胶的拉伸强度、撕裂强度、冲击弹性和硬度等提高,扯断伸长率和永久变形下降。这些变化一般在转化率为80——85％时有明显转折.综合考虑产量与质量,聚合转化率控制在82±2％较为适宜。     

Pore structure of bulk tungsten carbide powder catalysts

Bulk tungsten carbide catalysts are prepared by direct carburization/reduction of tungsten trioxide in methane-hydrogen mixtures. The catalytic properties of such catalysts have been studied by several authors. The porous structure of these catalysts is studied by adsorption of N₂, Kr, CF₄ and neohexane. Adsorption isotherms and hysteresis loops for the catalysts suggest the presence of a microporous structure made of parallel plates distant approximately by 20 Å. These results are compared to those obtained using such catalysts for hydrogen oxidation and where condensation in the porous structure was observed.