修井机多桥间转向传动机构的设计

对于大型修井机采用的重型底盘,多桥转向系统是底盘开发中的关键技术之一。在分析目前修井机采用的转向传动结构(方案1)存在问题的基础上,参照军用车底盘的应用案例又提出了2种方案,经对比分析,确定了最佳的传动机构新方案,并根据多桥转向理论和四连杆机构的几何关系对该机构进行了参数确定。通过实际应用,证明该转向传动布置方案具有传动误差小、不产生附加转向、现场调节安装方便、易于组织生产等特点。     

龙开口水电站溢流坝段动力模型破坏试验研究

采用仿真混凝土材料研究了龙开口水电站溢流坝段在不同因素影响下的动力破坏特征,并通过对6个模型试验结果的分析探讨了溢流坝段的动力破坏机理。试验中考虑了坝体-库水的动力相互作用以及横河向地震动对大坝破坏的影响,采用规范谱波和场地谱波两种地震动激励进行模型超载破坏分析。试验结果为工程设计和评价溢流坝段的抗震性能提供依据。     

β放射性气体浓度计的新分度方法

本文介绍β放射性气体浓度计的一种新的分度方法——泄漏元件排气法。其特点是一只元件可分度放射性气体浓度计的许多读出数(甚至是几个量程),操作方便。     

Vinyl acetate monomer—a pilot plant study

The kinetics of the reaction of acetic acid and acetylene over zinc acetate-activated carbon catalyst was investigated over a wide range of process variables in a pilot reactor. Although various catalytic reaction mechanisms were postulated, the rate of reaction was most satisfactorily correlated by a mechanism of surface reaction between charged adsorbed acetic acid and acetylene, which assumes that the rate controlling step was the irreversible charged adsorption of acetylene and acetic acid.     

除氧化物剂的除氧机理浅析

对无缝钢管生产所用的内壁除鳞材料———除氧化物剂中各个组分的性质和作用进行了阐述,提出了除氧化物剂的除氧机理。     

APDT-00三极放电管全自动打印机的研制

介绍了新近研制的APTD - 0 0三极放电管全自动打印机的结构特点及整机设计的关键技术 ,阐述了自动上料机构、打印机构和控制电路的设计     

Deposition mechanisms in langmuir-blodgett films

As part of a study of the possible application of polymerisable Langmuir-Blodgett (LB) films as ultra-fine-line e-beam resists, an investigation of the variation of film structure of 22-tricosenoic acid with differing deposition conditions has been made. Unexpected effects with significant implications for deposition speed and resist sensitivity have been observed, and the new techniques for film characterisation developed during the investigation have resulted in a revised model of deposition explaining the observed independence of the disorder causing optical scattering and the macroscopic features observed by polarised microscopy.     

一步法合成松香改性酚醛树脂

探讨了一步法合成松香改性酚醛树脂的反应机理，确定了最佳原料组成及合成工艺，由此制备出高溶解粘度和矿油容纳度的松香改性酚醛树脂，是一种性能优异的高级胶印油墨连接料     

Studies on Catalytic Side-Chain Oxidation of Nitroaromatics to Aldehydes with Oxygen

The side-chain oxidation of 2-nitrotoluene in liquid phase in the presence of catalytic amount of manganese sulfate and stoichiometric amount of potassium hydroxide with oxygen was studied. In the most favorable conditions, over 80% of conversion of 2-nitrotoluene and 50% of selectivity to 2-nitrobenzaldehyde was achieved. Effects of the reaction parameters on the conversion of the reactant and the selectivity of the product were examined. These results, together with EPR spectroscopic study, show that a benzyl anion was formed in the early stage of the reaction, which was then converted to the final product via a free radical mechanism.     

硝酸铵的膨化机理研究

膨化硝酸铵是一种自敏化改性硝酸铵,由硝酸铵溶液在专用表面活性剂作用下,经真空强制析晶工艺制得.文中研究了膨化硝酸铵制备的膨化过程和专用表面活性剂的作用,结果表明:在真空和表面活性剂作用下,硝酸铵溶液由不饱和状态至饱和状态,进而达到过饱和状态,最终导致硝酸铵的快速结晶和体系的膨胀.在真空干燥过程中,形成中心空穴、微细孔道和裂缝,它们使膨化硝酸铵的起爆感度提高;专用表面活性剂具有降低硝酸铵溶液表面张力、发泡剂和加快结晶成核的作用.