炭黑密相气力输送系统设计

随着橡胶工业的发展，以及气力输送特有的优点，气力输送系统越来越广泛地应用于输送炭黑的过程中。以炭黑气力输送系统为研究对象，详细介绍了系统设计的基本参数确定、气力输送形式的确定、压送罐客积的设计、输送管道的设计，并通过输送系统压力降的计算验证了设计参数的取值是合理的。     

注射成型模具排气槽的设计

塑料注射成型模具的排气方式和排气槽结构直接影响塑料制品质量。介绍了塑料注射成型模具的排气方式、排气槽设计经验以及切实可行的排气方案和排气槽结构。     

Experimental design approach to calcium carbonate precipitation in a semicontinuous process

The production of precipitated calcium carbonate, PCC, by a semicontinuous process of slaked lime carbonation was performed in a bench-scale chemical reactor, fully controlled by means of custom built electronics and software for the personal computer. Calcite crystals, with different characteristic morphologies (rhombohedral, truncated prismatic, scalenohedral, spheroidal or chain-like agglomerates) were produced by varying a range of process parameters, like temperature, supersaturation, gas mixture flow rate, stirring rate and mass concentration of Ca(OH)₂ suspension. In order to identify the effects of the chosen process parameters on the PCC morphology and on the related specific surface area, as well as on the extent of CO₂ conversion, an empirical approach based on the experimental design techniques was employed. A multiple correlation analysis of the obtained data suggests that temperature and conductivity significantly influence the PCC morphology, while CO₂ conversion is principally influenced by stirring rate, conductivity and gas mixture flow rate.     

基于TS201的信号处理软件设计

基于TS201处理器的软件优化设计,对于提高运算效率和运行稳定性是非常关键的。结合具体项目和实际工作经验,对如何正确利用TS201处理器的各种资源进行了分析,并提出了优化设计方法。按此方法设计的信号处理软件已成功应用到了某探测系统中,实现了系统提出的各种功能,并满足实时性要求,软件运行稳定,验证了所提方法的正确性。     

便携心电传感器的心房肥大诊断研究

基于便携式传感器的模式识别在心电(ECG)监护领域具有广泛的应用前景,并且在心律不齐、心肌梗塞、心室肥大等心电的识别算法上都已有大量的研究与应用,但在心房肥大诊断上却未有模式识别相关的研究成果。心房肥大病症的心电数据量不足给研究造成重大障碍,部分分类器无法适应小样本训练下的分类。针对小样本训练进行研究,对比了不同分类方法,显示了基于统计模式识别的支持向量机(SVM)应用于心房肥大的应用潜力。另外,由于不同个体的心房肥大心电存在差异,在实际应用环境中,SVM存在无法良好泛化的问题,存在类别错分的医学风险。针对类别错分情况,采用分类器融合的方法改进分类器,提出了在SVM分类器输出端增加了拒绝域的分类器(SVM-R)的方法。实验结果表明:SVMR有较高的分类准确率与诊断可信度。     

一种小型动/静态双坐标感知系统结构设计

针对提高被动式热释电红外(PIR)传感器的探测距离和范围,提出动/静态双坐标感知系统理论,根据动/静态双坐标感知系统对动态目标实现一定距离内和全范围探测的要求,光学基准传递的要求,提出了小型动/静态双坐标感知系统的结构设计方案。该系统配用红外透镜作为其光学装置,在匀速转台的带动下,实现360°全范围探测红外信号,解决了PIR传感器探测距离和探测视场的矛盾,拓宽了PIR传感器的使用领域。经过实验验证,该系统结构设计合理。     

单极板微位移电容传感器结构设计与优化

根据单极板微位移电容传感器结构优化设计的问题,提出了一种基于纵横推进法的电磁场仿真参数化建模方法。在建立合理的单极板电容传感器电磁仿真参数模型基础上,首先通过仿真实验选择保护环和绝缘层缺口的最优值。然后依据仿真得到的最优值,选择结构与最优值接近的电容传感器产品对比,取得了较好的研究结果,电容仿真值与实际测量值误差小于0.3%。最后对电容传感器极板倾斜对测量结果的影响进行了研究,极板倾斜2°时测量误差为1.6%。电容传感器结构优化结果满足实际工程要求。     

机车车载漏电流数字传感器研究与应用

介绍一种机车车载漏电流数字传感器的研究与应用,在模拟漏电流传感器的基础上,经数字化改进而实现.硬件设计采用ARM平台,在分析系统原理的基础上,完成了硬件系统和软件架构的设计,完成了单线和双线的模拟实验.经模拟实验验证检测准确、反应快速,通信采用CAN总线安全可靠.在实际测量中,验证了模拟实验的正确性,设计可行.     

An Elastic Architecture Adaptable to Various Application Scenarios

The quantity of computer applications is increasing dramatically as the computer industry prospers. Meanwhile, even for one application, it has different requirements of performance and power in different scenarios. Although various processors with different architectures emerge to fit for the various applications in different scenarios, it is impossible to design a dedicated processor to meet all the requirements. Furthermore, dealing with uncertain processors significantly aggravates the burden of programmers and system integrators to achieve specific performance/power. In this paper, we propose elastic architecture （EA） to provide a uniform computing platform with high elasticity, i.e., the ratio of worst-case to best-case performance/power/performance-power trade-off, which can meet different requirements for different applications. It is achieved by dynamically adjusting architecture parameters （instruction set, branch predictor, data path, memory hierarchy, concurrency, status~zcontrol, and so on） on demand. The elasticity of our prototype implementation of EA, as Sim-EA, ranges from 3.31 to 14.34, with 5.41 in arithmetic average, for SPEC CPU2000 benchmark suites, which provides great flexibility to fulfill the different performance and power requirements in different scenarios. Moreover, Sim-EA can reduce the EDP （energy-delay product） for 31.14% in arithmetic average compared with a baseline fixed architecture. Besides, some subsequent experiments indicate a negative correlation between application intervals＇ lengths and their elasticities.     

基于幂图的属性约简

针对粗糙集理论中基于差别矩阵的属性约简方法存在的不足,提出一种基于幂图的属性约简算法.首先通过修改样本决策属性值将不相容决策表转化为简化的相容决策表;然后将样本对概念与幂图概念相结合,将基于修正差别矩阵的不相容决策表的属性约简转化为幂图的搜索问题;最后通过实例和实验验证了所提出算法的有效性.