基于LMD的PWM整流电路故障特征提取新方法

脉冲宽度调制(PWM)整流电路结构日益复杂,对其可靠运行提出了更高的要求;对局域均值分解(LMD)用于PWM整流电路的故障特征提取进行研究,提出一种基于LMD和加权频带能量法的特征提取新方法;该方法通过逐步抽取调频调幅成分将故障信号在频域上展开,然后基于信号能量的频带分布特点,充分考虑各频带成分与故障的相关性,构造故障特征向量,实现特征提取;最后以PWM整流电路为例进行仿真,相电压380V,仿真时间0.5s,0.1s时注入故障;结果表明,该方法能有效地提取故障信号的特征,并降低特征向量的维数。     

Computational Parametric Analysis of Cellular Solids with the Miura-Ori Metamaterial Geometry under Quasistatic Compressive Loads

Origami-based metamaterials have widespread application prospects in various industries including aerospace, automotive, flexible electronics, and civil engineering structures. Among the wide range of origami patterns, the fourfold tessellation known as Miura-ori is of particular attraction to engineers and designers. More specifically, researchers have proposed different 3D structures and metamaterials based on the geometric characteristics of this classic origami pattern. Herein, a computational modeling approach for the design and evaluation of 3D cellular solids with the Miura-ori metamaterial geometry which can be of zero or nonzero thicknesses is presented. To this end, first, a range of design alternatives generated based on a numerical parametric model is designed. Next, their mechanical properties and failure behavior under quasistatic axial compressive loads along three perpendicular directions are analyzed. Then, the effects of various geometric parameters on their energy absorption behavior under compression in the most appropriate direction are investigated. The findings of this study provide a basis for future experimental investigations and the potential application of such cellular solids for energy-absorbing purposes.     

Diode-Pumped Solid-State Lasers for Inertial Fusion Energy

We have begun building the Mercury laser system as the first in a series of new generation diode-pumped solid-state lasers for inertial fusion research. Mercury will integrate three key technologies: diodes, crystals, and gas cooling, within a unique laser architecture that is scalable to kilojoule and megajoule energy levels for fusion energy applications. The primary near-term performance goals include 10% electrical efficiencies at 10 Hz and 100J with a 2–10 ns pulse length at 1.047 m wavelength. When completed, Mercury will allow rep-rated target experiments with multiple chambers for high energy density physics research.     

Structural and properties of nanocrystalline WO3/TiO2-based humidity sensors elements prepared by high energy activation

Nanocrystalline WO₃/TiO₂-based powders have been prepared by the high energy activation method with WO₃ concentration ranging from 1 to 10 mol%. The samples were thermal treated in a microwave oven at 600 °C for 20 min and their structural and micro-structural characteristics were evaluated by X-ray diffraction, Raman spectroscopy, EXAFS measurements at the Ti K-edge, and transmission electron microscopy. Nitrogen adsorption isotherms and H₂ Temperature Programmed Reduction were also carried out for physical characterization. The crystallite and particle mean sizes ranged from 30 to 40 nm and from 100 to 190 nm, respectively. Good sensor response was obtained for samples with at least 5 mol% WO₃ activated for at least 80 min. Ceramics heat-treated in microwave oven for 20 min have shown similar sensor response as those prepared in conventional oven for 120 min, which is highly cost effective. These results indicate that WO₃/TiO₂ ceramics can be used as a humidity sensor element.     

Structure damage diagnosis using neural network and feature fusion

A structure damage diagnosis method combining the wavelet packet decomposition, multi-sensor feature fusion theory and neural network pattern classification was presented. Firstly, vibration signals gathered from sensors were decomposed using orthogonal wavelet. Secondly, the relative energy of decomposed frequency band was calculated. Thirdly, the input feature vectors of neural network classifier were built by fusing wavelet packet relative energy distribution of these sensors. Finally, with the trained classifier, damage diagnosis and assessment was realized. The result indicates that, a much more precise and reliable diagnosis information is obtained and the diagnosis accuracy is improved as well.     

合成氨工艺参数优化技术开发及应用

以氨净值为响应值,影响响应值的17个过程参数为变量,经逐步回归选入触媒温度左3,触媒温度左4,循环CH_4%,H/N,NH_3%(进口)5个过程参数建立预测方程,并根据该方程对响应值的拟合结果和误差分布对样本进行分类。在此基础上,采取图形显示技术和统计分析的方法对分类样本集的过程参数进行比对分析,由此获取优类信息制订优化的工艺参数方案,经仿真验证后用于指导合成氨装置的生产试验。试验结果与试验前的对照期比较,氨净值均值由13.86提高到14.54,吨氨气耗减少15.9887m~3,吨氨电耗减少15.8kWh,节能效益十分明显     

特种电动机高压阀门准确制动的仿真计算

对于特种异步电动机拖动的高压阀门 ,切断电动机交流供电电源后 ,在电机的定子绕组中通入适当的直流电流 ,产生直流磁场 ,使电机进行能耗制动 ,让阀心和电机转子的能量 ,包括动能消耗在转子的绕组中 ,达到准确停车的目的。介绍了这一过程的计算机仿真计算     

A new neural network algorithm for planarization problems

To deal with the planarization problem widely used in many applications including routing very-large-scale integration （VLSI） circuits, this paper points out that only when its vertices are arranged in some specific order in a line can a planar graph be embedded on a line without any cross connections or cross edges. Energy function is proposed to meet the need of embedding a graph on a single line and route it correctly. A Hopfield network is designed according to the proposed energy function for such embedding and routing. The advantage of the proposed method is that it not only can detect if a graph is a planar one or not, but also can embed a planar graph or the maximal planar subgraph of a non-planar graph on a single line. In addition, simulated annealing is employed for helping the network to escape from local minima during the running of the Hopfield network. Experiments of the proposed method and its comparison with some existent conventional methods were performed and the results indicate that the proposed method is of great feasibility and effectiveness especially for the planarization problem of large graphs.     

无线传感器网络中影响能源消耗的因素的研究

在传感器网络中,电源能量是各个节点最宝贵的资源。为了使传感器网络的使用时间尽可能地长,必须合理有效地利用能量。该文从无线传感器网络的体系结构出发,对影响网络能源消耗的因素进行了研究。