亚齐示范屋与生态技术

亚齐示范屋是在传承印度尼西亚当地住宅传统的基础上，海啸灾区重建的示范性建筑。从当地传统的传承、设计理念及生态技术方面对该示范屋进行了分析、研究，结合我国的情况得出我国生态建筑的发展策略。     

Modeling and performance analysis of IP access interface in optical transmission networks with packet switching

The article analyzes the influence of the Internet Protocol (IP) access interface on the packet loss probability and delay times in the optical packet switched network. The network and node model have been proposed, and the structure of the IP access interface, including assembler and holder, have been included in the analysis. It has been shown that the increase of the maximum optical packet sizes, as well as use of the holding feature as contention resolution mechanism, decrease the packet loss probability, but introduce delays at the optical network access points. Modeling and analysis were based on the discrete event simulation assuming self-similar traffic sources. IP packet lengths were modeled using empirical data. This work has been conducted while the author was affiliated with the Telecommunication Laboratory, Swiss Federal Institute of Technology (EPFL-STI-ITOP-TCOM), Lausanne, Switzerland     

FD—TD在分析FSS中的应用

本文讨论了用FD TD分析FSS的有关问题,提出了一种适合于在任意入射角情况下分析FSS的有效吸收边界条件,分别以单层、双层FSS为例进行了计算.数值结果和矢量模式法、谱域法的结果非常一致.     

Nitrogen dioxide effect in the reduction of nitric oxide by propane in oxidizing atmosphere

The role of nitrogen dioxide in the selective reduction of NO by propane over a Cu-MFI zeolite is investigated. NO₂ and NO reductions were carried out under similar conditions of reaction. In the presence of oxygen, the reduction of NO by C₃H₈ does not differ significantly from that of NO₂. In the absence of oxygen, the reduction of NO₂ by propane occurs with a partial decomposition of the nitric dioxide molecule. Such a decomposition leads to the formation of oxygen, which is responsible for the increase in catalytic activity by comparison with the same reaction performed with NO. NO₂ formed and released in the gas phase during the reduction of NO by propane in the presence of oxygen does not play a predominant role in the catalytic process.     

Valid parameter range analyses for chemical reaction kinetic models

The present work quantifies the relations between the structure of a chemical reaction kinetic model, its valid parameter range, and the truncation error tolerance of the model. General methods are presented to solve the three important problems of valid parameter range analysis: (1) identification of the valid parameter range of a kinetic model, (2) estimation of the error tolerance required when applying a kinetic model over a specified parameter range, and (3) improvement of existing model generation algorithms to construct more robust models. Finally, the relationship between a model's structure, its valid parameter range, and the truncation error tolerance are illustrated by the flexibility-tolerance-model graph. The new methods are applied to pyrolysis of methane/ethane mixtures.     

基于SolidWorks的螺杆压缩机机体三维建模设计

应用SolidWorks软件,建立了螺杆压缩机机体三维实体模型.对螺杆压缩机机体的内、外螺旋面的建模进行了分析和研究,提出了建立分段螺旋面模型的基本思路和方法.     

TES modeling for analysis of a video multiplexer

The transport of video images is likely to be a major application of high-speed networks of the future. These applications are capable of utilizing the high bandwidths that will become available with the advent of B-ISDN. In this paper, we propose a new methodology (called TES) for modeling the frame bitrate stream generated by compressed video sources. The main characteristic of this method is that it can model an arbitrary marginal distribution and approximate the autocorrelation structure of the random bitrate process generated by compressed frames. We present a modeling example utilizing this method, based on data from a video coding algorithm employing a layering technique. Using the source model, we develop a simulation model of a multiplexer of video sources. We show that this model can be used to address a number of design issues that arise in this class of problem. In particular, we show that for a layered video coding algorithm, it is possible to have a gain in the number of sources multiplexed at the cost of some loss of low priority packets.     

镇沅金精矿选择性固砷焙烧—氰化浸出新工艺研究

对云南镇沅金矿的难当金精矿进行了选择性固砷焙烧－氰化浸出的试验研究，取得了满意结果。砷固定率大于９２％，硫挥发率为７８％－８４％，金浸出率可达９１％－９３％。选择性固砷焙烧－氰化浸出新工艺可有效消除砷害，综合利用有价成分硫，特别适宜于含砷高硫，同时含碳等杂质的细粒浸染型难浸金矿石的处理，在我国有较大的发展前景。     

Heterogeneous object modeling: A review

A review on the recent development in heterogeneous object modeling is provided in this paper. General problems and prevalent solutions to the modeling of heterogeneous objects are investigated. Vigorous heterogeneous object representations are roughly classified into three major categories: evaluated models, unevaluated models and composite models. We reveal their similarities and study their strengths and weaknesses in terms of the representational capacities, intuitiveness, exactness, compactness, efficiency and other criteria. Different design paradigms are briefly reviewed to provide an overview of the state-of-the-art in heterogeneous object design. Finally, open problems and possible future directions are discussed.     

Crystallographic orientation dependence of the growth rate for GaAs low pressure organometallic vapor phase epitaxy

The complete crystallographic orientation dependence of the growth rate for GaAs low pressure organometallic vapor phase epitaxy (LPOMVPE) is determined using a previously described semi-empirical model. A set of LPOMVPE growth rate polar diagrams is presented for reactor temperatures near 550°C as well as near 700°C. Also, the variation of the growth rate polar diagrams as a function of process variables is given. The experimental data utilized in the semiempirical model was attained using a typical horizontal reactor LPOMVPE system and typical LPOMVPE process parameters.