Pattern synthesis of time‐modulated conformal arrays by an improved differential evolution algorithm

In this article, an improved differential evolution algorithm (IDE) based on two different colonies is proposed and applied to time‐modulated conformal arrays syntheses. The whole population of IDE is divided into two parts. The one part searches the solution globally while the other searches the neighborhood of the solution provided by the previous one. Benchmark functions are provided to testify IDE. Furthermore, IDE is applied to synthetize sum‐difference patterns with a 1 × 16 elements time‐modulated circular array and low sidelobe level (SLL) patterns with an 8 × 12 elements time‐modulated cone array. After optimization, the sideband level (SBL) of the circular array at the first sideband frequency is ?1.00 dB. The SLL and SBL at the first sideband frequency of the cone array are lower than ?30.00 and ?20.00 dB, respectively. Experiment results verify the superior performance of IDE. Moreover, to accelerate the computation speed, graphics processing unit parallel computing technique is introduced into pattern synthesis and the acceleration ratios of more than 23 times can be achieved. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:697–705, 2014.     

Synthesis of antenna arrays with an efficient multiobjective differential evolution algorithm

An efficient multiobjective differential evolution algorithm for array synthesis is proposed in this article. By introducing novel strategies in the generalized differential evolution (GDE3), the proposed algorithm can generate a better converged and distributed Pareto front than the standard GDE3. Five typical benchmark functions are optimized by the proposed improved GDE3 (IGDE) to verify its effectiveness. Furthermore, the proposed algorithm is applied in two‐pattern synthesis problems, including an unequal spaced linear array and a conformal array. The superior performance of the proposed IGDE demonstrates that it is an efficient and competitive algorithm in the function optimization, pattern synthesis, and other electromagnetic problems. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:161–169, 2014.     

Preparation of phenolic resin derived 3-D ordered macroporous carbon

Three-dimensionally ordered long-range macroporous carbon structures were prepared using commercially available phenolic resin by utilizing sacrificial colloidal silica crystalline arrays as templates that were subsequently removed by HF etching after pyrolysis in an argon atmosphere. SEM, TEM, and BET were employed to characterize the morphology and the surface area of the porous carbon structures. The pore size (150–1000 nm) and BET surface area, which reflect pore volume (298.6 m²/g (1.32 cm³/g) ∼ 93.7 m²/g (0.12 cm³/g)), of the macroporous carbon structures produced were approximately proportional to the size (150–1000 nm) of the sacrificial silica sphere templates used (annealing temp. 550°C). The achieved 550 nm porous carbon structures were examined to function as potential catalyst carriers and were successfully impregnated with Ag or Pt-Ru on their inner walls after borohydride reduction at room temperature. In addition, porous carbon patterns were fabricated using the ‘micromolding in capillary’ technique, which has potential applications in the microreaction technology.     

混酸冲洗滤盘的可行性

湿法磷酸生产中，均以水为介质冲洗倾覆盘式真空过滤机的滤盘，为实现系统的污水零排放，提高倾覆盘式真空过滤机的生产能力，提出以回磷酸和硫酸配制成混酸去冲洗滤盘的方法。分析了采用该方法的诸多优点及注意事项，指出安全生产问题须认真落实。     

基于RTX的工程飞行模拟器数据采集与存储系统设计

在一些仿真应用中,由于Windows操作系统较差的实时性,从而给许多半物理仿真试验带来了一些不确定的因素.在充分论证的基础上,引入了Ardence公司的基于Windows的硬实时解决方案RTX（Real-Time eXtension）,并结合某型号飞行器仿真课题总结出了Windows环境下RTX实时应用系统的设计方法与开发流程以及RTX下硬件板卡驱动程序的编写,最后将这种设计方法成功应用在某型号飞行器飞行仿真系统中.实验证明该仿真系统是可靠的、稳定的,整个实验过程中飞行器的飞行数据没有丢失,仿真周期确定,结果正确,RTX仿真程序能够满足系统对实时性和确定性的要求.     

一种数字光盘数据保密方法

提出了一种支持数据保密的光盘文件系统以及适用于数字光盘的数据保密方法。改进了ISO 9660 Level 2标准的光盘文件系统, 划分为明文区、保密区和参数区三部分, 分别存储明文、密文和参数数据。光盘制作模块将明文数据、密文数据及参数数据制作成光盘文件系统的镜像文件, 同时将光盘阅读模块注入到明文区。光盘阅读模块专门存取保密区数据。该方法能实现明文、密文数据及其解密工具并存于同一光盘, 无需安装额外的软件, 该文件系统兼容目前所有的光盘设备。     

局部表面改性紫铜方柱阵列池沸腾传热特性和机理

以局部表面改性的紫铜直方柱和梯度方柱阵列为研究对象，实验研究了表面润湿性、表面形貌和表面活性剂对池沸腾换热性能和气泡生长特性的影响。实验工质为去离子水，浓度分别为100、200、400、800 mg·L^-1的异丙醇溶液和正庚醇溶液。实验结果表明：方柱阵列表面镀银之后润湿性变差，表面产生的气泡数量减少。向去离子水中添加异丙醇或正庚醇后，在热通量为66.1～202 kW·m^-2时，气泡脱离直径变小、数目减少，而当热通量增至413 kW·m^-2时，活性剂能够有效阻碍气泡合并，故池沸腾传热系数随着浓度增加先减小后增大。上下层宽分别0.5 mm和1 mm、间距为2 mm的梯度方柱阵列结构有助于气泡的合并，但由于促进了固体表面气膜的形成，从而降低了沸腾换热性能。     

纳米ZnO传感阵列对多组份气体的智能识别

采用物理热蒸发法制备纯ZnO纳米线及Al,Ag,Ni掺杂的ZnO纳米线.以纯ZnO纳米线及Al,Ag,Ni掺杂的ZnO纳米线为基料分别制成气敏传感器;利用气体敏感的差异性,构建纳米ZnO基气敏传感器阵列,结合BP人工神经网络来实现纳米ZnO基气敏元件对目标混合气体组分和相对浓度的识别.结果表明:将传感器阵列输出灵敏度值进行处理后,输入BP神经网络完成训练,能够准确识别混合气体(CO,H2,CH4)的组分与相对浓度。     

基于SIMD PE阵列的图像同态滤波并行算法

为了满足G级像素帧实时处理的要求,提出图像同态滤波的数据并行实现方法.讨论了图像帧和滤波器在SIMD PE阵列中的预置及数据并行的滤波处理实现方法,其处理方式规则性强、并行度高,提高了处理速度.由于SIMD PE阵列具有可裁减性,可以适合不同规模图像帧的处理需求,满足不同的嵌入式应用环境.     

运用硬件提高计算全息运算速度综述

计算全息技术的快速发展使得全息电视、全息电影成为可能.许多研究者正在致力于开发的电子全息三维显示系统的最关键的技术之一就是提高计算全息技术的运算速度.由于计算全息技术所需要的计算量很大,使用一般计算机无法以帧频速率实现全息图的计算,因此研究者们在提高全息图的计算速度方面进行了大量的研究工作.在主要调查研究使用硬件加速的方法来提高全息图计算速度的基础上,论述了其研究现状以及未来的发展动态.