A Brief Introduction on Joint Radar and Communication Systems

Joint radar and communication(JRC) technology is gradually becoming an essential approach to alleviating spectral congestion. Radar and communications systems were designed with common spectral and hardware resources to reduce size, improve performance, reduce cost, and decongest the spectrum. Various approaches have been proposed to achieve the coexistence of radar and communication systems. This paper mainly focuses on the research directions of radar communication coexistence(RCC) and dual-function radar communication systems(DFRC) in JRC technology. We summarize and analyze the existing research problems in the JRC era. According to the characteristics and advantages of JRC technology, we highlight several potentials in military and commercial applications.     

一种信息中心移动自组网中的数据访问控制机制

针对信息中心移动自组网场景中节点间间歇连接和网内泛在缓存的特点,提出一种基于门限秘密共享机制的数据访问控制机制.通过构建辅助密钥块,降低了消费者解密的开销和网络节点的存储资源消耗.同时,通过引入双变量单向函数,保障了消费者子秘密份额的唯一性,减少了消费者侧秘密份额管理所带来的空间开销.仿真和理论分析结果表明,该机制显著降低了消费者侧的解密开销,良好地适应了信息中心移动自组织网络场景.     

基于动态模式分解的移动用户信道容量预测算法

在多输入多输出环境下,为了能够连续预测出移动用户的信道容量并以此合理地分配用户资源,提出了一种基于动态模式分解（DMD）的信道容量预测方法及其优化方法：基于经验模态分解的选择性归一化动态模式分解（ESN-DMD）.仿真结果表明,DMD算法只适用于预测低移速低复杂度的用户信号,ESN-DMD算法可以预测不同移速的用户信道容量.     

Effect of equal channel angular extrusion on the microstructure and superplasticity of an Al-Li alloy

This research investigates the use of equal channel angular extrusion (ECAE) processing to produce a superplastic form of the aluminum alloy 2098. The starting material was a hot-rolled and precipitation-hardened plate with elongated grains of width 67–92 μm, and a composition in weight percent of 2.2% Li, 1.3% Cu, 0.73% Mg, 0.05% Zr, balance Al. Microstructural evolution was investigated with optical and transmission electron microscopy (TEM) and microhardness measurements after each step of a multipass ECAE process. ECAE produced a submicron grain structure with an average size of about 0.5 μm. The sub-grain microstructure size was a function of the magnitude of the input strain and the extrusion temperature. Misorientation angles of the developed submicron structure increase with increasing number of passes at warm working temperatures. Superplastic behavior of the ECAE-processed alloy was achieved. However, the low zirconium content of the 2098 alloy resulted in grain growth of the refined structure at the superplastic processing temperatures, placing a lower limit on the deformation rates that can be used.     

一种基于RSA安全可行的（t，n）门限签名方案*

分析了大多数RSA门限群签名方案存在的缺陷,RSA的模数是n,φ(n)是秘密参数,参加部分签名的成员无法知晓,求Lagrange相关系数存在困难,也为建立门限RSA密码体制带来困难.提出一种新的方案以克服上述困难,通过求ai无须在求Lagrange相关系数时进行求逆运算,使该方案在保证安全的前提下变得可行实用.     

变流场情景下基于鱼类游泳特性的上溯通道分析

水电开发对洄游性鱼类的生境造成了影响,预测目标鱼类洄游期的上溯通道可为修建过鱼设施提供依据,从而减缓其负面效应。本文选取虎渡溪航电工程的下游河段作为研究区域,将长薄鳅、白甲鱼、异鳔鳅鮀作为目标鱼类,针对几种目标鱼类的游泳能力对不同流速进行分区后,得出了适用于多种过鱼目标的流速适宜度曲线,然后对研究区域过鱼期的典型流量进行了数值模拟。根据流速适宜度曲线对研究区域的多种过鱼目标进行了流速适宜度评价,并由评价结果预测了满足多目标过鱼要求的上溯通道。结果表明：流速适宜度评价最优区域出现的位置随流量变化而有所不同,低流量运行条件下出现在主流区域,而高流量运行条件下出现在主流区域两侧;上溯的通道面积占总面积的比例也随流量变化而有所不同,低流量运行条件下的占比约为高流量运行条件下的3 ~ 4倍。根据预测通道特征,对鱼道的进口布置及电站运行调度提供了建议。该结果可为相关鱼类的保护工作提供依据。     

TRPM7-Mediated Calcium Transport in HAT-7 Ameloblasts

TRPM7 plays an important role in cellular Ca²⁺, Zn²⁺ and Mg²⁺ homeostasis. TRPM7 channels are abundantly expressed in ameloblasts and, in the absence of TRPM7, dental enamel is hypomineralized. The potential role of TRPM7 channels in Ca²⁺ transport during amelogenesis was investigated in the HAT-7 rat ameloblast cell line. The cells showed strong TRPM7 mRNA and protein expression. Characteristic TRPM7 transmembrane currents were observed, which increased in the absence of intracellular Mg²⁺ ([Mg²⁺]_i), were reduced by elevated [Mg²⁺]_i, and were inhibited by the TRPM7 inhibitors NS8593 and FTY720. Mibefradil evoked similar currents, which were suppressed by elevated [Mg²⁺]_i, reducing extracellular pH stimulated transmembrane currents, which were inhibited by FTY720. Naltriben and mibefradil both evoked Ca²⁺ influx, which was further enhanced by the acidic intracellular conditions. The SOCE inhibitor BTP2 blocked Ca²⁺ entry induced by naltriben but not by mibefradil. Thus, in HAT-7 cells, TRPM7 may serves both as a potential modulator of Orai-dependent Ca²⁺ uptake and as an independent Ca²⁺ entry pathway sensitive to pH. Therefore, TRPM7 may contribute directly to transepithelial Ca²⁺ transport in amelogenesis.     

考虑传输能力的含分布式电源配电网扩展规划方法

为灵活性资源提供快速、及时调度的网架传输通道,在规划阶段充分考虑网架结构与分布式电源(DG)规划对配电网传输能力的影响,提出考虑网架通道传输能力的配电网扩展规划及DG选址定容双层优化方法.首先建立了线路负荷裕度指标和潮流均衡度指标用以评价配电网传输能力;其次分析了网架通道传输能力的影响因素,在此基础上构建了配电网扩展规划及DG选址定容双层优化模型,保证了规划方案具有良好的经济性和网架通道传输能力,利用嵌套的混合粒子群优化算法进行优化求解;最后将所提规划方法与只考虑经济性规划方法进行了算例验证.仿真结果表明,所提方法不仅没有增加经济费用,而且所得规划方案网架潮流更均衡,线路负荷裕度更高,传输能力更优.     

纯铝等径角挤技术（I）——显微组织演化

研究了纯铝在 3种 (A、B和C)不同等径角挤工艺中的显微组织演化。结果表明 :纯铝经过等径角挤压变形后 ,其显微组织特征与加工路线有很大的关系。提出了立方元素扭转模型 ,分析了 3种不同加工路线的剪切面和剪切方向 ,较好地解释了采用 3种不同路线挤压后材料显微组织的演化规律。在路线C(各道次挤压间试样旋转 180°)中 ,每次挤压样品总是在相同的剪切面上发生剪切 ,每相邻道次之间的剪切方向相反 ,前一次变形产生的剪切应变被随后紧接着的下一次挤压所抵消 ,这导致了多余的剪切应变 ;在路线A(各道次挤压间试样不旋转 )中 ,有两个相交成 6 0°的剪切面 ,剪切交替地在两个剪切面上进行 ;在路线B(各道次挤压间试样旋转 90°)中 ,存在 4个不同的剪切面和剪切方向 ,挤压交替地在 4个剪切面上进行 ,X ,Y和Z平面上的晶粒都发生了剪切 ,这有利于等轴晶结构的形成     

Monte-carlo modeling of grain growth in Zr equal channel angular pressed and recrystallized

Grain boundary character distribution in equal-channel-angular pressed Zr was studied. Using a die design of 90°/20° and an operation temperature of 350°C. The initial grain size of 20 μm was reduced to about 270 nm with 4 passes via route B_c. The grain growth kinetics of the recrystallized state was obtained by experiment and Monte-Carlo computer simulation, respectively, which showed good agreement. Based on kinetics and morphological characteristics, it was concluded that the grain coarsening mechanism was governed by normal grain growth. No sign of abnormal grain growth was detected either in the experiment or in simulation despite taking into consideration anisotropy in grain boundary energy as well as its mobility. This indicates that grain boundaries produced by severely deformed Zr are stable against explosive coarsening. The evolution characteristics of the microstructure in the present ECA pressed and recrystallized Zr differed from those of cold rolled Ti in that the grain boundary misorientation distribution and texture were rather stable during grain growth. Jointly Appointed by the Center for Advanced Aerospace Materials This article is based on a presentation made in the 2002 Korea-US symposium on the “Phase Transformations of Nano-Materials,” organized as a special program of the 2002 Annual Meeting of the Korean Institute of Metals and Materials, held at Yonsei University, Seoul, Korea on October 25–26, 2002.