光热电站容量效益评估及影响因素研究

光热发电作为一种清洁能源,配置储热后具有良好的调节性能,近年得到大力发展。依据自身经济性,光热电站往往配备较大的储热装置,能够平移所吸收的光热能,且具有跨日调节能力,使得光热机组有一定替代常规机组带负荷的能力,即容量效益。本文提出一种基于等可靠性的光热电站容量效益评估方法,考虑了调峰方式、储热时长、新能源规模、光热电站规模对光热电站容量效益发挥的影响,采用基于数学优化的生产模拟仿真程序,以周为尺度,计算全年8760 h的系统运行状态,计及了机组启停、水电跨日调节、抽蓄跨日调节、光热电站的跨日调节等因素。最后通过对西北地区实际电网的仿真,验证了所提方法的有效性。     

新能源汽车电池负极材料的制备与性能研究

采用原位合成法制备了镍-氧化镍/多孔碳纳米片（Ni-NiO/PCNs）负极材料,对比分析了氯化钠模板、退火温度和退火时间对负极材料物相组成、显微形貌和电化学性能的影响。结果表明,Ni/PCNs、Ni-NiO/C和Ni-NiO/PCNs负极材料都主要含有镍和无定型C相,且后2种负极材料还含有氧化镍相;300 ℃/4 h为Ni-NiO/PCNs负极材料适宜的退火工艺,此时Ni-NiO/PCNs负极材料中Ni-NiO粒子分散性较好且保持着三维片层结构,平均尺寸约为27 nm,Ni-NiO实现了对无定型C的包裹;退火时间过长（6 h）会使得镍粒子过氧化且发生团聚,而温度过高（400 ℃）会使得粒子以团聚为主,三维片层状结构消失。电流密度为1 A/g、循环5 000圈后Ni-NiO/PCNs负极材料的放电比容量为235 mA·h/g,此时的放电比容量约为首圈放电比容量的83.93%;Ni-NiO/C和Ni/PCNs负极材料在充放电循环过程中以及循环5 000圈后的放电比容量和容量保持率都明显低于Ni-NiO/PCNs负极材料,Ni-NiO/PCNs负极材料具有更好的循环稳定性,这主要与其具有独特的多孔三维片层结构有关。     

高镍三元正极材料表面碱性物质研究进展

高镍三元正极材料表面形成的碱性物质容易导致电池容量衰减加快、寿命缩短,因而调控三元材料表面碱性物质对于提高锂离子二次电池的功能和安全性至关重要。综述了高镍锂离子电池三元正极材料表面碱性物质的形成机理及处理手段,从不同角度阐述了环境中的水、二氧化碳对表面碱性物质形成的影响。探讨了表面碱性物质形成过程中,由于锂离子和过渡金属的迁移与固化引发的表面结构的相变现象,造成了三元正极材料的加工储存性能的恶化。还对降碱工艺中的洗涤、干燥、低温烧结等过程进行了重点说明,阐述了洗涤工艺对三元材料表面碱性物质降低及对材料性质的影响,指出需选择合适的洗涤、干燥条件,减小材料表面发生的变异。最后结合目前降碱工艺对后续研究方向提出了建议。     

无机超细粉体改性锂离子电池隔膜的研究进展

综述了近年来无机超细粉体改性锂离子电池隔膜的研究进展,首先介绍了已在锂电隔膜改性上商业应用的Al₂O₃和AlOOH对传统聚烯烃膜和新型静电纺丝膜的改性方法和改性效果,随后又对常规无机材料TiO₂和SiO₂粉体对锂电隔膜的改性进行了叙述,最后对BN等非常规隔膜改性无机材料进行了简介;总结和讨论了无机材料改性后隔膜的组分、结构和性能对锂离子电池综合性能的影响,并对其无机材料改性锂电池隔膜的未来发展趋势进行了展望。     

化学交联聚酰亚胺隔膜增强锂离子电池性能研究

隔膜作为锂离子电池的重要组成部分,用于阻隔阴极和阳极直接接触,同时为锂离子在电极间的传输提供有效通道。聚酰亚胺隔膜因其具有充放电循环寿命长、机械强度适中、良好的电绝缘性能以及自熄能力等优点,而受到广泛关注。以对苯二甲胺作为交联剂,将聚酰亚胺隔膜进行化学交联,研究了交联时间与隔膜形貌、结构及性能之间的构效关系。随着交联时间的增加,隔膜的孔隙率和吸液率逐渐降低,电解液接触角和机械强度逐渐增大。电化学测试表明,随着交联时间的增加,隔膜的本体阻抗逐渐增大,进而离子电导率逐渐降低,而交联隔膜的界面阻抗均远小于未交联隔膜,且交联隔膜的电化学窗口也均大于未交联隔膜。通过组装半电池测试发现,交联隔膜所组装电池的倍率性能和循环性能均优于未交联隔膜,当交联时间为48 h时,电池性能表现最优,循环100次以后,放电比容量为130.2 mA·h/g,容量保留率为91.1%。     

LiNi1-xMxO2 (M =Co3+, Al3+)的制备与性能

采用球形Ni(OH)2和LiNO3、CoO、Al(OH)3为原料，在空气气氛条件下700℃恒温8h，合成了锂离子电池正极材料LiNixCo1-xO2和LiNi0.75Al0.25O2。X射线衍射分析表明合成的材料粉末结晶良好，具有规整的α-NaFeO2层状结构；SEM分析表明粉末颗粒呈球形，粒径约为7μm。充放电测试表明：合成的LiNixCo1-xO2正极材料的充电比容量为160mAh／g，放电比容量为152mAh／g；LiNi0.75Al0.25O2正极材料的充电比容量为140mAh／g，放电比容量为129mAh／g；这两种正极材料具有优良的电化学性能。     

STUDY ON Ni-Cr SYSTEM SOLAR SELECTIVE THIN FILMS PREPARED BY MAGNETRON REACTIVE SPUTTERING PROCESS

1. IntroductionSolar selective thiIl solid fil1us are the key part for solar heat collect'ors. But ll1ostfactories still produced solar absorptive filn1s by traditional tecIl11ology sucl1 as pai1ltillga1ld electrocl1eluical process that nlust result in po…     

CRYSTAL STRUCTURE OF γ-Li_xFe_2O_3 WITH ELECTROCHEMICAL INSERTION OF Li

Crystal structure of γ-Li_xFe_2O_3,inserted Li electrochemically,was studied by Moss-bauer spectroscopy together with X-ray diffraction,XPS and electrochemical method,Onthe insertion of Li at low current density,the crystal structure is keeping original spinel;while at higher current density or by thermal activation,owing to violent movement ofLi~+ ions,part of crystal structure transforms into rock type similar to face-centeredcubic structure of ferrous oxide.The transition channels during insertion of Li~+ ions andlimitation of Li~+ ions inserted were discussed.     

Kinetics of synthesis of Li4Ti5O12 through solid-solid reaction

1. Introduction The solid-solid reaction used in synthesizing various kinds of electrochemical materials has many advantages, such as simple process, without using solvent, saving energy, friendly to the environment and easy to obtain good quality materials like nano-size materials. Recently, the manufacturing of electrochemistry materials has been paid more atten- tion due to its increasing needs. Therefore it is a natural interest to study the synthesis of electro- chemical materials by usin…     

Effect of oxygen precipitates in solar grade silicon on minority carrier lifetime and efficiency of solar cells

The effect of oxygen precipitates on minority carrier lifetime and performance of solar cell was studied by means of Fourier Transform Infrared Spectroscopy (FTIR), quasi-steady state photoconductance (QSSPCD), optical microscope, spectrumresponse and solar cell efficiency test. The minority carrier lifetime and performance of solar cell reduced depend on oxygen precipitates. A few of oxygen precipitates have formed after single-step annealing; and they do not impact the efficiency dramatically. Pre-annealing at 650 ℃ for 4 h enhances the oxygen precipitation when it is subjected to middle temperature annealing. The solar cells performance decayed sharply. Especially annealing at 950 ℃ for 3 h, the V os and I sc of cells decrease 12% and 25% respectively. Few oxygen precipitates have formed in silicon after high temperature annealing at about 1050 ℃ whether pre-annealing is used or not, and the performance of cells is notbe affected.