原油集输太阳能加热节能技术的应用

在油田的采油、集输等过程中,传统技术使用燃烧煤、油、天然气和电加热方法来实现原油加热,造成大量的能源消耗和严重的环境污染。原油集输太阳能加热计算机控制节能系统,为油田的采油、集输开辟了节能新途径。该系统不仅具有自动化、智能化的特点,而且节能效果显著,实际节气率超过40%。文章介绍了该系统的结构、工作原理、功能特点以及应用效果。     

个人剂量仪两种电源电路设计的比较

个人剂量仪器一般要求采用电池供电，并且希望电池使用的时间越长越好，随着电池电压的降低，仪器的一些性能也会下降，合理的电源设计会延长电池的使用寿命，也能提高仪器性能，介绍了电池直接供电和采用电源芯片转换供电两种方法，并结合个人剂量仪主要进行了仪器功耗，电池使用寿命的比较，也进行了仪器其它性能，仪器成本，体积等方面的比较，通过比较结果，可根据仪器的实际要求来选择电源电路设计的方法。     

Mg-doped LiNi0.5Mn1.5O4 spinel for cathode materials

Lithium-ion batteries are becoming more and more important not only for portable electronic devices, but also in prevision of high power electric vehicles. In such an optic, deep studies regarding all the components of a secondary battery are in development. In this study, high voltage cathode materials have been selected. Crystals with spinel structure have a 3D vacancy pathway suitable for Li-ions transport. The material under study was LiNi_0.5Mn_1.5O₄ doped with magnesium replacing the nickel. Various samples were synthesized via three different routes: a solid-state method, a modified sol–gel method and a xerogel method. The structure and morphology of the powders were analyzed with HRTEM and XRD. Electrochemical tests were also performed. A wide range of particle sizes (from micro to nanosize) was the result of the different synthesis routes. Unfortunately pure materials were not always obtained. The electrochemical tests showed improvement of the material's cyclability, by reducing the particle size. The electrochemical tests further confirmed the existence of a Li_1+dMn_2−dO₄ impurity. The results are quite promising, however, further improvement of the purity of the electrode composition are needed.     

晶体硅薄膜电池制备技术及研究现状

晶体硅薄膜太阳电池近些年来得到广泛的研究和初步的商业化探索。根据所采用的晶体硅薄膜沉积工艺中温度范围的不同，晶体硅薄膜电池研究可分为高温路线和低温路线两个不同发展方向。本文分别从这两个方向综述了目前国外晶体硅薄膜电池制备技术的最新进展，最新实验室研究结果。报导了晶体硅薄膜电池商业化进展状况，指出了晶体硅薄膜电池实现产业化必须解决的问题。     

提高摩托车用干荷电电池综合性能的研究

通过改进铅膏的配方及极板的独特处理工艺 ,提高了干电荷电摩托车电池的低温高率放电性能、充电接受能力和储存性能 ,完全可以满足国内外摩托车主机厂的各种要求。     

穿壁焊极柱合金探索

本文对起动用铅酸蓄电池穿壁焊极柱用合金配方进行了探索 ,并得到了良好的应用效果     

光催化氧化后四环素的分解率与COD去除率之间关系的探讨

以粉状无机半导体（ＺｎＯ）为催化剂，探讨了水溶液中四环素经光催化氧化分解率和ＣＯＤ去除率之间的关系。实验表明，在本实验中四环素的分解率和ＣＯＤ去除率之间有较好的正相关性。当反庆系统中有足量的活性催化剂和足够的光照时间时，绝大部分四环素将被较彻底地氧化分解成ＣＯ２，这不仅有助于光催化反应机理的研究，助于今后在环保中的实际应用。     

太阳能热水器内表面电刷镀锌

用电刷镀的方法,对尺寸为2000mm×1000mm×0.8mm 的 A_3钢板电刷镀锌保护层;并对影响镀锌层质量的因素进行了充分的研究。     

Flexible and light weight copper indium diselenide solar cells on polyimide substrates

Thin film flexible CuInSe₂ (CIS) solar cells have been fabricated for the first time on light-weight polymeric substrates. Evaporated Cu---In alloy precursors were selenized in H₂Se atmosphere at around 400°C to grow the CIS absorber layers. Low temperature techniques which are compatible with the polymeric substrates were used to deposit the window layers of CdS and ZnO. The demonstrated active area conversion efficiency of 9.3% makes this light-weight device very attractive for many terrestrial and space power generation applications where high specific power and mechanical flexibility are needed.     

Heat and Moisture Transfer in Wet Sand Exposed to Solar Radiation—Models and Experiments Concerning Buried Objects

One promising method of locating buried objects, such as land mines, is to use optical systems for detecting contrasts in surface temperature. With enhanced knowledge about the interacting physical processes behind these temperature contrasts, it is possible to improve detection precision. In such a context, moisture movement in the soil and moisture evaporation from the surface have been found to be of particular interest. This study was based on indoor experiments on wet and dry sand exposed to radiation from a solar panel. Simulations of heat and moisture transfer conducted with a one-dimensional model are also presented for the experiments. The calculations were successful in accurately predicting surface temperatures for both wet and dry sand, making it possible to predict surface temperatures under different conditions. These findings will contribute to increasing the probability of successful detection of buried objects under real conditions using optical methods.