建立加气砼直观数理模型的探索

若视加气砼为细观的“两相”材料,则可建立起其细观几何结构的随机直观数理模型,本文应用随机几何的方法探索了加气砼最佳合理内部细观几何结构模型的建立,及其计算机随机模拟,由细观角度讨论了改善加气砼性能的可能性。     

温度梯度机理下激光参数对激光成形的影响

以纯铝板和低碳钢板为主要研究对象，对温度梯度机理下激光输入功率、扫描速度、离焦量以及扫描次数等参数与成形弯曲角之间的关系进行了试验研究，深入分析了温度梯度机理下影响成形的主要因素。     

断层破裂过程对减隔震桥梁地震反应的影响

为了研究断层破裂过程对减隔震桥梁地震反应的影响,提出利用相位特性模拟方向性效应的改进随机格林函数法. 以1994年美国北岭地震的断层条件为例,通过与实际地震记录对比验证模拟方法的有效性;应用改进的随机格林函数法模拟相同震中距离的4组地震动时程作为输入条件,比较断层破裂过程对相同震中距离、不同方位的减隔震桥梁地震反应影响. 结果表明,利用持时包络曲线与相位差分分布的相似性可以方便模拟随机格林函数的地震动加速度时程;在相同震中距离条件下,断层破裂方向的观测点地震动以及对应位置的桥梁结构地震反应明显大于非破裂方向位置的观测点;当破裂方向上地震动时程不具有脉冲特性时,断层周围的减隔震桥梁地震反应主要受地震动强度的影响,桥梁方位的影响不明显.     

一种新的基于梯度方向直方图的图像配准方法*

构建了一种新的局部梯度方向直方图,同时定义了特征点的主方向,从而提出了一种具有旋转不变性的图像配准算法.首先采用高斯加权求模技术对特征点邻域内的像素的梯度作直方图统计,确定出具有旋转不变性和抗噪性的特征点主方向;然后用主方向作角度直方图统计,确定待配准图像之间的旋转角度.根据得到的特征点信息及旋转角度定义了特征点对互信息匹配准则,这样使得新配准算法对于图像间旋转角度的范围没有限制,获得了良好的配准效果.     

参激随机共振及纠错码技术的应用

为了有效地降低数字信号传输过程中的比特误码率,提出了纠错编码与参数调节随机共振技术的结合.在经过噪声污染后,依据参数调节随机共振技术的性质,给出通过系统参数调节的二进制脉冲幅值调制（PAM）输入信号的渐近误码率公式,应用纠错码技术采用中间值估计的方法得到修正的比特误码率.数字仿真试验证实,理论计算结果与试验结果相吻合,纠错码技术与参激随机共振技术的结合应用于二进制基带信号传输,可以降低误码率,从而可以得到更好的效果,提高通信的可靠性和有效性.     

Numerical simulation of microstructure formation ofAZ91 using mCA method

A stochastic model for simulating the microstructure formation of Mg alloy AZ91 during solidification was developed based on the finite element method（FEM） for macroscopic model of heat transfer calculation and a modified Cellular Automaton （mCA） for microscopic modeling of nucleation, growth of crystal. In this model, the effect of solute redistribution, interface curvature and preferred orientation was considered. A numerical simulation was developed with C＋＋ program language. The computation was carded out to understand the effect of varying processing parameters, such as nucleation parameters and heat transfer coefficient, on the microstructure formation of AZ91. The result of simulation was displayed on screen.     

Effects of temperature and blank holding force on biaxial forming behavior of aluminum sheet alloys

Biaxial forming behavior is investigated for three aluminum sheet alloys (Al 5182 containing 1% Mn (5182+Mn), Al 5754, and 6111-T4) using a heated die and punch in the warm forming temperature range of 200–350 °C. It is found that, while all three alloys exhibit significant improvement in their formability compared with that at room temperature, the non-heat-treatable alloys 5182 + Mn and 5754 give higher part depths than that of heat-treatable 6111-T4. The formability generally increases with decreasing BHP (BHP), but increasing the forming temperature and/or BHP minimizes the wrinkling tendency and improves the forming performance. The stretchability of the sheet alloys increase with increasing temperature and increasing BHP. For the alloys and forming conditions involved in the current study, the formability, measured in terms of part depth, comes mainly from the drawing of metal into the die cavity, although stretching effects do influence the overall forming behavior. The optimum formability is achieved by setting the die temperature 50 °C higher than the punch temperature to enhance the drawing component. Setting the die temperature higher than the punch temperature also improves the strain distribution in a part in such a manner that postpones necking and fracture by altering the location of greatest thinning.     

Al-18%Si合金在梯度强磁场中凝固时初生硅的行为

研究了Al-18%Si合金在10 T梯度强磁场下加热至半固态和全熔态后的凝固过程,观察了初生硅的分布和形态,测定了其冷却曲线.结果表明:在磁场的磁感应强度和磁场梯度的乘积Bz·dBz/dz为正时,初生硅向上部聚集;而在Bz·dBz/dz为负时,初生硅向下部聚集;在强磁场下,加热至全熔态冷却下来的凝固组织中初晶硅的形态发生了明显的改变,由板片状转变为块状,初晶硅显著细化.对强磁场细化初晶硅的机制进行了探讨.     

Investigation on gradient material fabrication with electron beam melting based on scanning track control

A new electron beam control system was developed in a general vacuum electron beam machine by assembling with industrial control computer, programmable logic control （PLC）, deflection coil, data acquisition card, power amplifier, etc. In this control system, scanning track and energy distribution of electron beam could be edited off-line, real-time adjusted and controlled on-line. Ti-Mo gradient material （GM） with high temperature resistant was fabricated using the technology of electron beam melting. The melting processes include three steps, such as preheating, melting, and homogenizing. The results show that the GM prepared by melting technology has fine appearance, and it has good integrated interface with the Ti alloy. Mo and Ti elements are gradually distributed in the inter.face of the gradient material. The microstructure close to the Ti alloy base metal is α ＋ β basket-waver grain, and the microstructure close to the GM is a single phase of β solid solution.     

CdZnTe Crystal Growth by Vertical Gradient Freezing Method

ＣｄＺｎＴｅＣｒｙｓｔａｌＧｒｏｗｔｈｂｙＶｅｒｔｉｃａｌＧｒａｄｉｅｎｔＦｒｅｅｚｉｎｇＭｅｔｈｏｄＨｏｕＱｉｎｇｒｕｎ；ＷａｎｇＪｉｎｙｉ；ＤｅｎｇＪｉｎｃｈｅｎｇ；ＤｕＢｉｎｇ，（侯清润）（王金义）（邓金诚）（杜冰）；ＬｉＭｅｉｒｏｎｇａｎｄＣ...