积分分离PID算法的电阻炉温度控制系统

为使大惯性、纯滞后的电阻炉温度控制系统的动态性能和稳态精度满足要求,提出了Smith预估结合积分分离PID算法;设计了温度控制器的硬件系统;对控制系统进行辨识;分析了Smith预估结合积分分离PID算法与单纯Smith预估控制算法的区别,并对两种控制算法进行了比较分析,确定了电阻炉温度控制系统参数;最后对Smith预估结合积分分离PID算法进行了电阻炉的温度控制实验;实验结果表明,采用Smith预估结合积分分离PID算法提高了电阻炉温度控制系统的稳定性,降低了系统的超调,稳态精度达到0.2℃,其动态性能和稳态精度满足系统控制要求.     

gain bounds for systems with sector bounded and slope‐restricted nonlinearities

This paper proposes a new method for calculating a bound on the gain of a system comprising a linear time invariant part and a static nonlinear part, which is odd, bounded, zero at zero and has a restriction on its slope. The nonlinear part is also assumed to be sector bounded, with the sector bound being (possibly) different from that implied by the slope restriction. The computation of the gain bound is found by solving a set of linear matrix inequalities, which arise from an integral quadratic constraint formulation of a multiplier problem involving both Zames‐Falb and Popov multipliers. Examples illustrate the effectiveness of the results, and comparisons are made against the state‐of‐the‐art. Copyright © 2011 John Wiley & Sons, Ltd.     

Some investigations on fuzzy P + fuzzy I + fuzzy D controller for non-stationary process

The paper addresses the adaptive behaviour of parallel fuzzy proportional plus fuzzy integral plus fuzzy derivative (FP+FI+FD) controller. The parallel FP+FI+FD controller is actually a non-linear adaptive controller whose gain changes continuously with output of the process under control. Two non-stationary processes, whose characteristics change with time, are considered for simulation study. Simulation is performed using software LabVIEW TM . The set-point tracking response of parallel FP+FI+FD is compared with conventional parallel proportional plus integral plus derivative (PID) controller, tuned with the Ziegler-Nichols (Z-N) tuning technique. Simulation results show that conventional PID controller fails to track the set-point and becomes unstable as the process changes its characteristic with time. But the parallel FP+FI+FD controller shows considerably much better set-point tracking response and does not deviate from steady state. Also, a huge spike is observed in the output of PID controller as the reference set-point and process parameters are changed, while the FP+FI+FD controller gives spike free control signal.     

Memoryless SMC Design Methods for Stochastic Delay Systems

Recently, the sliding mode control (SMC) method has been extended to accommodate stochastic systems. Particularly, restrictive assumption on the structure of the control systems have been removed and a practical SMC design method for stochastic systems has been presented. This paper continues this line of research and studies the SMC methods for stochastic systems with state delay in diffusion. Both delay‐independent and delay‐dependent approaches are investigated. Essentially, this paper studies SMC design methods with memoryless controllers for time delay systems, which has been a problem in the past decades.     

Stability of Impulsive Stochastic Neutral Partial Differential Equations With Infinite Delays

In this paper, we study the existence and asymptotic stability in the pth moment of the mild solutions to impulsive stochastic neutral partial differential equations with infinite delays. Sufficient conditions ensuring the stability of the impulsive stochastic system are established. The results are obtained via the Banach fixed point theorem.     

Delay‐dependent stability for Markovian genetic regulatory networks with time‐varying delays

This paper is concerned with the problem of stochastic stability analysis for a class of genetic regulatory networks with Markovian jump parameters and time‐varying delays. A delay‐dependent stability criterion is derived by using a novel mode‐dependent Lyapunov functional. The derived stability criterion is expressed in terms of linear matrix inequalities and is less conservative than the existing ones in the literature. A numerical example is provided to demonstrate the effectiveness of the proposed stability criterion. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Intelligent control of doubly‐fed induction generator systems using PIDNNs

An intelligent control for a stand‐alone doubly‐fed induction generator (DFIG) system using a proportional‐integral‐derivative neural network (PIDNN) is proposed in this study. This system can be applied as a stand‐alone power supply system or as the emergency power system when the electricity grid fails for all sub‐synchronous, synchronous, and super‐synchronous conditions. The rotor side converter is controlled using field‐oriented control to produce 3‐phase stator voltages with constant magnitude and frequency at different rotor speeds. Moreover, the grid side converter, which is also controlled using field‐oriented control, is primarily implemented to maintain the magnitude of the DC‐link voltage. Furthermore, the intelligent PIDNN controller is proposed for both the rotor and grid side converters to improve the transient and steady‐state responses of the DFIG system for different operating conditions. Both the network structure and online learning algorithm are introduced in detail. Finally, the feasibility of the proposed control scheme is verified through experimentation. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

The volume integral method of eddy-current modeling: Verification

The volume integral method of eddy-current modeling represents a flaw in metal as a set of electric dipoles located within volume elements or cells defining the flaw volume. Given this dipole distribution, impedance changes may be computed. The electric field of the dipole distribution is determined by an integral equation relating, by means of the electric field Green's tensor, the electric field due to the source to the total electric field in the flaw. The integral equation is solved by assuming that the total electric field is constant in each volume element, resulting in a matrix equation. The method has been programmed for use on a microcomputer. The method and computer program are verified using the analytical solution for a small spherical flaw and three sets of measured impedance data, measured by air-core coils along profiles overlying both surface-breaking and buried simulated flaws of known dimensions. Operating frequencies ranged between 900 and 4000 Hz. Generally agreement is good at lower frequencies ( 1000 Hz). At higher frequencies ( 4000 Hz), the agreement is not as good. This is thought to be due to the inability of the constant electric field approximation to model the steep electric field gradients present in the host metal at high frequency. The results are also sensitive to the method of computation of the electric field due to the source. Some improvements can and should be made to the method.     

建立加气砼直观数理模型的探索

若视加气砼为细观的“两相”材料,则可建立起其细观几何结构的随机直观数理模型,本文应用随机几何的方法探索了加气砼最佳合理内部细观几何结构模型的建立,及其计算机随机模拟,由细观角度讨论了改善加气砼性能的可能性。