基于ASM的混合式情境感知共享机制研究

移动的用户能够方便地访问分布在普适计算环境中的传感器,进而获得情境信息,是情境感知系统的核心目标。本文提出了一种融合分布式P2P和Publish/Subscribe模式的混合式情境感知共享机制,基于抽象状态机对该机制的高鲁棒和可扩展的特性进行设计和规约,并采用AsmL测试工具生成有限状态机验证该机制的有效性和合理性,表明该机制可满足动态的分布式情境感知系统要求。     

高空作业平台臂架伸缩运动的横向振动特性

为了探究高空作业平台做伸缩运动时变幅平面内的横向振动动力学特性,针对臂架的实际搭接和支承情况,将臂架等效为根部铰接、中间弹性支承且带有集中参数的变截面变长度梁. 基于牛顿第二定律建立各臂段的运动微分方程,采用模态叠加法、结合边界条件求解臂架一系列时刻的瞬态振型函数,曲线拟合时变参数以近似表示梁的振型,并依据伽辽金截断方法,得到广义坐标下的状态空间方程. 在Matlab/Simulink环境下进行动态仿真,得到伸缩过程中臂架头部的变幅平面横向振动动态响应. 结果表明,就横向振动振幅而言,搭接简化会带来15.63%计算结果误差;支承简化会加大臂架整体刚度、减小臂架振动响应,不可取。     

高强度结构钢的韧性启裂和稳态扩展

研究了具有一定韧度的高强度结构钢裂纹早期扩展阻力与材料的微观组织结构、应力状态、变形历史和应变特性之间的关系。结果表明:裂纹扩展阻力(指J_R阻力曲线中的J_i和dJ/da)主要决定于裂纹尖端的塑性约束程度和应力应变场中消耗的弹性能和塑性功。这与三轴应力状态函数σ_mσ~(1/2)有关。材料的流变曲线描述了形变过程中的变形历史和应变特性,有明显的阶段性,其中第Ⅱ阶段的变形历史和应变特性制约着裂纹的启裂过程,第Ⅲ阶段的变形历史和应变特性制约着裂纹的扩展过程。应变硬化率dσ/dε可以敏感地反映出材料内部的应力分布和微观断裂机制。     

The transient state in the oxidation of binary alloys forming the most-stable oxide: A numerical solution

The initial transient high-temperature oxidation stage for binary alloys forming the most-stable oxide has been examined by means of a numerical procedure based on the finite-difference method. At variance with previous models, the present treatment takes into account the effect of the rate of the reaction at the scale/gas interface over the corrosion kinetics. The calculations concerning the transient stage are developed either using the general parabolic rate law to represent the overall scaling kinetics or using the rate law of the reaction at the scale/gas interface as a boundary condition without imposing any particular rate law to the overall process. A correct analysis of the oxidation behavior of binary alloys during the transient stage must take into account the kinetics effect of the rate of the surface reaction. The concentration of the most-reactive element at the alloy/scale interface changes regularly with time, decreasing gradually from the initial bulk value to its final steady-state value. The present results are in good agreement with those obtained by means of an approximate analytical model developed previously.     

基于电网电力设备“两态”管理体制的安全生产责任体系建设的研究与应用

介绍了安全生产责任体系建设的基本内容,分析了电网电力设备安全生产现状及存在问题,并结合相关实践经验,分别从强化电网电力设备状态检修等多个角度与方面,探讨了电网电力设备安全生产责任体系建设策略。     

Electronic struture of titanium silicides

ＥＬＥＣＴＲＯＮＩＣＳＴＲＵＣＴＵＲＥＯＦＴＩＴＡＮＩＵＭＳＩＬＩＣＩＤＥＳＬｏｎｇ，Ｘｉａｎｇｙｕｎ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓｔｒｙ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏｆＴｅｃｈｎｏｌｏｇｙ，Ｃｈａｎｇｓｈａ４１００８３）Ｃ...     

Metallochemical Analysis of the Reaction in a Mixture of Nickel and Aluminum Powders

Phaseformation processes are considered at the level of a mesocell of a mixture with the use of the state diagram for a binary system. Consecutive schemes of metallochemical reactions of formation and decomposition of intermetallide compounds in a mixture of nickel and aluminum powders are suggested. The problem of diffusion annealing of this mixture is numerically solved for two different conditions: at a constant temperature and at a temperature slowly increasing by a linear law.     

如何培养学生的健康心理

我们的社会需要的是身心都健康的人才，而目前无论是学校还是家庭，都过多地重视学生的知识掌握和身体训练，忽视对学生健康心理的培养。为此，提出了培养学生健康心理的措施。     

Solid‐state polymerization of poly(ethylene terephthalate). I. Experimental study of the reaction kinetics and properties

The solid‐state polymerization (SSP) reaction kinetics of poly(ethylene terephthalate) were investigated in connection with the initial precursor intrinsic viscosity (IV; molecular weight). Evaluations were performed with otherwise equivalent precursors melt‐polymerized to IVs of 0.50, 0.56, and 0.64 dL/g. The changes in the molecular weight and other properties were monitored as functions of the reaction times at solid‐state temperatures of 160–230°C. Precursors with higher initial molecular weights exhibited higher rates of SSP than those with lower initial values, as discussed in connection with the levels of crystallinity and the carboxyl and hydroxyl end‐group composition. Activation energies decreased at temperatures above 200°C, and this indicated a change in the SSP reaction mechanism. At temperatures of 200–230°C, similar activation energies were required for the polymerization of all three precursors. Lower temperature polymerizations, from 160 to 200°C, required higher activation energies for all precursors, with the 0.50‐IV material requirement almost twice as high as that calculated for the higher IV precursors. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 197–212, 2003     

New shape factor for corresponding states principle

1 INTRODUCTIONThe CSP(Corresponding States Principle)has been considered to be a useful methodfor the prediction of fluid properties from a minimum amount of information.One ofits form,the shape factor methods is developed through relating the pVT of any interestedpure fluid"a"to that of another"0"by writing