GAO Feng~1,LI Wei~2,TANG Zon

tific Experiment Center of Guangxi Medical University,Nanning 530021,China)Objective:To investigate the mutation pattern of adenomatous polyposis coli(APC),Kirsten-ras(K-ras) and p53 genes in sporadic colorectal cancer tissues.Meth     

Alternating,all-trans polyenynes: Model compounds for poly(diacetylene)s with defined conjugation length

The syntheses of polyenynes as model compounds for poly(diacetylene)s (PDAs) are described. Variation of properties (UV–VIS, Raman, NMR and bond geometries) as a function of the chain length was investigated. After extrapolation to infinite chain length these data were compared to those for PDAs. From UV–VIS spectra a value of λ = 551 nm (2.25 eV) was calculated corresponding to the electronic transition of a single polyenyne chain. This energy is located at the low energy end of a yellow PDA solution spectrum. From Raman scattering v_(C?C) = 2108–2128 cm^?1 and v_(C?C) = 1505–1532 cm^?1 were calculated after extrapolation. Similarly sp-C¹³C NMR data yielded a shift of δ = 100 ppm. These data are almost identical to data known for yellow PDA solutions. Bond geometries are almost identical to those of poly(diacetylene)s and theoretical data.     

Comments on “Equivalence of characterizations of fixed models”

In this note we present a proof to the conjecture given in the above paper, and therefore establish the equivalence of characterizations of fixed modes for the general case.     

SOLUBILISATION OF NITROGENOUS CONSTITUENTS OF BREWERS' SPENT GRAIN

The extraction of nitrogenous material from Brewers' spent grain (BSG) by solvents (water, sodium chloride solution, aqueous alcohol, acidic and alkaline solutions) commonly used to extract cereal proteins, resulted in the relatively low (0·2 to 8·5%) recovery of the total nitrogen. The recovery of nitrogenous material by the use of aqueous alkaline solutions was increased from 3–4% to 41% when the BSG was subjected to cellulase incubation prior to extraction. Approximately 75% of the nitrogen was solubilized with trifluoracetic acid. Detergent solutions (acid, neutral) solubilized more than 80% of the total nitrogen of the BSG. The low solubility of the nitrogenous constituents by conventional protein solvents could be the result of association between cellulosic material and protein.     

An Optimal Model and Algorithm of Distributed Information System

Distributed information system makes itself be placed in changing file storage position according to the users＇ request pattern. In this paper, we rebuild the model for a management system to turn the process of file managing into a 0-1 programming problem, and present a new individual form to improve the operating efficiency. Aiming at the model, we define a neighborhood span to make segmentation for searching space by using the fitness, based on the region contraction algorithm, present a new evolution algorithm which has the capability of self-adaptively generating new individuals, and ultimately solve the management problem of the distributed file system.     

GaAs器件工艺中等离子刻蚀及计算机辅助监控技术研究

用Ｎ２气和ＮＦ３反应气体，在较低的刻蚀功率下实现了用薄正性光刻胶ＡＺ１５１８作掩模，均匀、快速刻蚀ＳｉＯ２，ＳｉＯＮ，Ｓｉ３Ｎ４，ＷＮ，Ｗ等材料的等离子刻蚀技术。利用到蚀过程中射频参数的变化和计算机技术，将射频参数的变化在计算机屏幕上实时显示，实现了计算机辅助监控和终点检测技术。     

应用并行技术实现CAD／CAM的高度集成

传统的CAD/CAM系统由于设计思想本身的局限性,其内部只能达到一种松散的基于数据交换的低水平的集成,产品的设计方法也不符合工程技术人员的设计思路。本文提出了基于全耦合的单一数据模型的并行CAD/CAM系统设计思想,使得CAD/CAM系统内部达到以数据共享为基础的高度集成。并行CAD/CAM系统充分体现了工程技术人员的思维方式及产品设计过程的反复性和协调性。此外,文中还提出广义参数化设计的新概念,它与特征设计方法的有机结合保证了产品模型的完整性和产品设计过程的同步性。特征共享是实现CAD和CAM集成的关键因素。并行CAD/CAM系统应用面向对象软件设计思想,实现了复杂数据模型的内部封装,并为数据模型和功能模块之间提供简单直观的界面。面向对象设计方法是开发并行CAD/CAM系统的有效手段。     

交联型聚醚聚氨酯的表征、力学性能及其碱金属盐络合物的导电性能

采用三羟甲基丙烷（ＴＭＰ）作交联剂与聚乙二醇（ＰＥＯ－１５４０）和甲苯二异氰酸酯（ＴＤＩ）反应，得到了具有较好力学性能的交联型聚醚聚氨酯（ＰＥＵ），该聚合物与ＬｉＣｌＯ４的结合物具有较高的室温电导率（σ３０℃＝１．８７×１０￣（－４）Ｓ／ｃｍ）。采用全反射红外光谱（ＡＴＲ－ＩＲ）对聚合物的结构进行了表征。对聚合物的组成、不同ＴＤＩ类型及络合盐浓度对聚合物力学性能及其络合物电导率的影响进行了探讨。低度交联聚合物的络合物，其电导率与温度的关系符合建立在自由体积理论上的ＶＴＦ方程，表明络合物中离子的传导主要是在无定形区域进行，与自由体积有关。     

��Ȼ����Һ���÷����̽

求文针对我国天然气凝液如何利用问题,结合新技术进展,进行了初步探讨,认为原料较多的场合,应以催化脱氢或芳构化作为当前的主要加工方向。对原料较少的场合,也提出一些看法。