The quantitative analysis of coal processing solvents by combined g.c.-m.s.

The application of combined g.c.-m.s. with automated data processing to the rapid analysis of coal solvents has been described. An analytical method, using commercially available data processing routines, has been developed for the automatic quantitative analysis of specific aromatic and hydroaromatic compounds in coal processing solvents. To demonstrate the use of this technique, raw anthracene oil was hydrogenated under different conditions and the resulting hydrogenated anthracene oils were analysed. The results showed correlations between the hydrogen content and the absolute concentrations of specific compounds in the samples.     

Supramolecular π–π assembly of a neutral [Cu(salen)] complex via the templating effect of an ionic inorganic complex Na2[Cu(mnt)2] forming a framework type material having well-defined channels

A classical ionic inorganic complex Na₂[Cu(mnt)₂] (mnt²⁻ = maleonitriledithiolate = 1,2-dicyanoethylenedithiolate), that acts as a template in assembling neutral [Cu(salen)] (salen = bis(salicylidene)ethylenediamine) complexes forming a framework type arrangement, is accommodated in the channel formed in the crystal structure of a new type of host–guest compound [Cu(salen)]₄ · Na₂[Cu(mnt)₂] (1). The non-covalent supramolecular interactions among [Cu(salen)] complexes and between [Cu(salen)] and [Cu(mnt)₂]²⁻ complexes in the crystal lattice of 1 result in weak antiferromagnetic coupling.     

Synthesis and Characterization of Segmented Block Copolymers Based on Hydroxyl‐Terminated Liquid Natural Rubber and α,ω‐Diisocyanato Telechelics

Summary: Segmented block copolymers, consisting of non‐polar soft segments from hydroxyl‐terminated liquid natural rubber (HTNR) and polar hard segments from α,ω‐diisocyanato telechelics obtained by “criss‐cross”‐cycloaddition, have been synthesized. The block copolymer formation took place under relatively mild reaction conditions at 80 °C in dichloroethane in the presence of dibutyltin dilaurate as a catalyst. The resulting block copolymers were characterized by spectroscopic techniques (¹H NMR, FTIR, UV‐vis spectroscopy) as well as GPC for molar mass determination. The block copolymers were compression molded in a hot stage press, and the resulting samples were characterized by DSC and stress‐strain measurement. The solubility and phase morphology of the materials have also been studied.

Segmented block copolymer from HTNR and α,ω‐diisocyanato telechelics     

Carbon molecular sieve films produced by dc sputtering

This paper reports adsorption measurements that show molecular sieve effects in amorphous hydrogenated carbon (a-C : H) films deposited by d.c. magnetron discharge decomposition of acetylene. Adsorption of organic gases on the films is studied by using a quartz crystal microbalance technique. The sieve effect in this material depends on both deposition and annealing conditions. Films having significant molecular sieve effects are found to be typically microporous and to have a very small characteristic micropore dimension. It is suggested that the d.c. sputtered a-C : H film may be useful as a molecular sieve material in selective adsorption and gas permeation studies.     

Analysis of epoxidized natural rubber. A comparative study of d.s.c., n.m.r., elemental analysis and direct titration methods

A comparative analysis of epoxidized natural rubber samples by ¹H and ¹³C n.m.r., titrimetric, elemental and d.s.c. techniques has been made. Whereas the titrimetric method is only applicable at low epoxy contents (< 15 mol%) both n.m.r. methods give reasonable precision over the compositional range of 20–75 mol%. Elemental analysis appears less reliable. D.s.c. analysis through measurement of T_g provides the highest precision of measurement but requires independent calibration by one or more of the primary methods. The epoxy content may also be related to the polymer density.     

Assessment of a redox alkaline/iron-chelate absorption process for the removal of dilute hydrogen sulfide in air emissions

The oxidative absorption of hydrogen sulfide (H₂S) into a solution of ferric chelate of trans-1,2- diaminocyclohexanetetraacetate (CDTA) was studied in a counter-current laboratory column randomly packed with 15 mm plastic Ralu rings. The present investigation takes concern about the Kraft pulping situation where dilute H₂S concentrations are omnipresent in large-volume gas effluents. A fractional two-level factorial approach was instigated to determine the significance of six operating variables, namely the solution's alkalinity (pH; 8.5-10.5), the liquid mass flow rate (L;1.73-), the solution's ionic strength (I_C;0.01-), the gas mass flow rate (G;0.19-), the inlet H₂S concentration (C_H2S,0;70-430 ppm) and the initial ferric CDTA concentration (C_Fe,0;100 -). Initially, a Plackett-Burman design matrix of seven duplicated experiments revealed that pH is the leading factor controlling the H₂S conversion rate while the ionic strength and ferric CDTA concentration effects remained negligible within the factorial domain. Surface response analysis based on 11 duplicated factorial experiments plus 10 central composite trials revealed that the H₂S conversion significantly increases with liquid flow rate but decreases with growing H₂S load up. Further examination about the influence of ferric CDTA on H₂S absorption rate was set up over a broader concentration range (C_Fe,0;0- at pH of 9.5 and 10.5. It showed good potential at as H₂S conversion increased by a significant 25% for both pH values in comparison to pure alkaline solutions containing no ferric CDTA.     

脉冲直流PCVD技术在盲孔底部沉积Ti-Si-N薄膜

用脉冲直流等离子体辅助化学气相沉积(PCVD)技术在盲孔的底部获得Ti-Si-N薄膜。用扫描电子显微镜(SEM)，X射线能量色散谱仪(EDX)，X射线衍射仪(XRD)，球痕法(ball-Crater)，显微硬度计(Hv)和涂层压入仪(Pε)分析不同肓孔深度处薄膜的微观结构和力学性能。结果表明，随着盲孔深度的增加，Ti-Si-N薄膜中Ti与Si元素相对比例降低，薄膜厚度下降，薄膜与基体的结合强度有很大提高，膜基复合显微硬度下降，而薄膜的本征硬度在盲孔深度为20mm处出现最大值。     

Microstructure and Application of YBCO Superconductive Films with Low Surface Resistance

ＭｉｃｒｏｓｔｒｕｃｔｕｒｅａｎｄＡｐｐｌｉｃａｔｉｏｎｏｆＹＢＣＯＳｕｐｅｒｃｏｎｄｕｃｔｉｖｅＦｉｌｍｓｗｉｔｈＬｏｗＳｕｒｆａｃｅＲｅｓｉｓｔａｎｃｅＷａｎｇＸｉａｏｐｉｎｇ，ＹａｎｇＢｉｎｇｃｈｕａｎ，ＳｈｉＤｏｎｇｑｉ，ＰｅｎｇＺｈｅｎｇ...     

Memes in a Digital World: Reconciling with a Conceptual Troublemaker

This paper re‐examines the concept of “meme” in the context of digital culture. Defined as cultural units that spread from person to person, memes were debated long before the digital era. Yet the Internet turned the spread of memes into a highly visible practice, and the term has become an integral part of the netizen vernacular. After evaluating the promises and pitfalls of memes for understanding digital culture, I address the problem of defining memes by charting a communication‐oriented typology of 3 memetic dimensions: content, form, and stance. To illustrate the utility of the typology, I apply it to analyze the video meme “Leave Britney Alone.” Finally, I chart possible paths for further meme‐oriented analysis of digital content.     

16＊16点阵显示汉字的分析与制作

本文利用AT89c51作为控制芯片,将广泛使用的88的点阵组合成16＊16的汉字显示屏和串并转换驱动芯片74HC595芯片来完成显示复杂图形,并能在通过按键加快、减慢汉字移动速度的目标,设计极大节省了控制芯片的I／O资源。