热电厂锅炉运行技术指标的微机管理

本文从锅炉运行技术指标台帐微机管理的实际出发，提出了热量计算中主蒸汽流量修正系数Ｃ和给水焓值Ｚ两项参数回归的计算公式，提高了热量计算数值精度。     

搪瓷釉料新颖添加剂铝溶胶

搪瓷釉料新颖添加剂铝溶胶任岳荣（浙江省明矾石综合利用研究所３２５０２８）ＮｅｗＡｄｄｉｔｉｖｅＡｌｕｍｉｎａＳｏｌｆｏｒＧｌａｚｅｏｆＥｎａｍｅｌ￥ＲｅｎＹｕｅｒｏｎｇ（ＺｈｅｊｉａｎｇＩｎｓｔｉｔｕｔｅｏｆＣｏｍｐｒｅｈｅｎｓｉｖｅＵｔｉｌｉｚａｔ...     

特大型油罐整体一次性控爆拆除

本文介绍了特大型油罐整体一次性控制爆破拆除方案及其实施方法，这一方法与水压爆破拆除和常规钻孔爆破拆除方法相比，具有工效高，安全性好的突出优点。     

钻井泵阀箱密封面CO2堆焊试验研究及应用

介绍了用CO_2堆焊35CrMo钢钻井泵阀箱密封面磨损修复工作,通过试验表明,采用Φ1.2mm的H08Mn2Si焊丝,以短路过渡CO_2焊法施焊,可以获得致密、耐磨的堆焊金属层。该法已成功地用于生产,取得了良好的经济效益。     

论黄河三角洲流路演变及河口治理的指导原则

通过分析黄河三角洲流路演变中溯源堆积及溯源冲刷对典河下游河道影响的范围，幅度和作用历时，提出在黄河泥沙从根本上减少之前，河口治理的指导原则应是在有利于工农业发展和有利于防洪防凌前提下，有计划地安排河口流路。     

SiCf/O′-SiAlON composite: properties and oxidation retained properties

A composite of O′SiAlON (Si_2-xAl_xN_2-xO_1+x, with x 0.14) reinforced with 20 vol.% SiC monofilaments was fabricated by hot-pressing, at 1600°C, for 2 h under 34 MPa pressure. The mechanical and interfacial properties of the composites, as-fabricated as well as post-oxidized, were, investigated. The composite exhibited a significant improvement in ultimate flexure strength (640 MPa) and work of fracture (42 kJ m⁻²) compared with that (350 MPa and 1.8 kJ m⁻², respectively) of the monolithic material. These mechanical properties were slightly increased after the composite was heat treated for 24 h in air at 1200 and 1300°C. However, the composite exhibited a significant degradation in ultimate strength, while the work of fracture (WOF) remained unchanged after exposure in air at temperatures beyond 1400°C. The as-fabricated composite revealed a low interfacial shear strength (6.2 MPa) and a frictional sliding stress (3.2 MPa). After the composite was oxidized at elevated temperatures, the interfacial bonding and sliding stresses were reduced to noticeable extents, resulting from the degradation of the carbon coating layer of the SiC monofilaments.     

�±���������͹��ữ���ֳ�ʩ��������Է���

本文介绍了陕北气区陕35井第一次下光油管(即不带封隔器)酸化的施工情况,并结合该地区的地层压力特征分析了光油管酸化施工的可行性及应用限度。     

一种8毫米波变张角,半径突变多模圆锥馈源

我们研制了一种8毫米波变张角、半径突变的多模圆锥馈源。计算出其模比并推导出其辐射方向图公式;给出其在两个主平面——E平面与H平面上的辐射方向图和波束场分布特性的测试结果以及电压驻波比VSWR的测量结果;同时给出频带和旁瓣特性。分析与测试共同表明,在34.5GHz～37GHz频带里,该多模馈源的辐射图在大于24dB范围内获得幅度等化且不出现旁瓣,因此具有一定的应用价值。     

专科学生参加专业技能考核的实践与效果

工业分析专业实践性极强,要求学生掌握具体样品分析的各项技能,参加专业技能等级考核很有必要。考核工作要力求规范化,有章可循,精心组织安排。专业技能考核促进了教学改革,有利于培养实践动手能力强的高等应用性专门人才。