砷化镓声电荷转移延迟线的设计与工艺研究

由于声电荷转移(ACT)这一新颖的高速缓冲抽样技术的发明,使得新一代高速高频信号处理器件的实现成为可能。本文研究了第二代平面结构的ACT器件转移沟道的电位分布特性,给出了平面结构ACT延迟线的设计,并研究了ACT器件的工艺实现。     

三辊穿孔和轧管所产生的钢管壁厚极差和波浪形内螺纹

定量描述了实际生产过程中三辊斜轧穿孔所产生的钢管壁厚极差和波浪形内螺纹，初步探讨了三辊轧管机对钢管壁厚极差和波浪形内螺纹的影响。     

A new approach to the mechanism of chlorine evolution: Separate examination of the kinetic steps using ac impedance on a rotating thin ring electrode

In the absence of a bulk diffusion effect, it is shown for the first time that the impedance spectra for the chlorine evolution reaction on a rotating thin ring electrode comprise three consecutive semicircles in the capacitive half of the complex plane. The first (highest frequency) semicircle is due to the charge-transfer resistance for chloride discharge and the simultaneous chlorine adsorption coupled to the double-layer capacitance. The second semicircle (around 5 Hz) is due to the adsorption and desorption of a chlorine intermediate. The third (lowest frequency, around 0.5 Hz) semicircle is due to the relaxation of surface oxygen species. The impedance data allow the steps of the overall reaction to be examined individually. On a Pt surface the rate of chloride discharge and simultaneous chlorine adsorption (the admittance of the first semicircle) is first order with respect to chloride concentration and has a potential-dependence close to 58 mV/decade. The rate of the adsorption and desorption process (the admittance of the second semicircle) is second order with respect to chloride concentration, and has a potential dependence close to 30 mV/decade. The time constant for the adsorption/desorption processes is ca 20 ms, independent of electrode potential in the range studied. These features are consistent with a mechanism in which a faster discharge reaction (Cl⁻ Cl_ad + e) is followed by a slower surface combination reaction (2Cl_ad → Cl₂), but inconsistent with mechanisms in which ion + atom desorption is predominant, the initial chloride discharge is slow, or a unipositively charged chlorine species is involved.     

航空齿轮表面硬化层断裂性能研究

按照航空齿轮的具体工艺过程，对材料12Cr2Ni4A的拉伸试样和断裂试样进行设计和加工，通过三点弯曲实验，重点研究了齿轮材料硬化层的硬度分布，硬化试样拉伸力学性能参数和断裂性能参数，实验结果表明，所采用试样的加工工艺方案是可行的，所获得的Kc基本反映我国航空硬化齿轮材料的断裂性能特征，为定量预测航空硬化齿轮疲劳寿命提供实验和理论分析的依据。     

优化SMC模压工艺控制制品收缩率和表面粗糙度

优化SMC模压工艺参数：模压压力分为二阶段，选定最佳压力释放时机和压力；适宜降低模压温度。可显著降低SMC制品的固化收缩率，提高其表观质量、试验表明，同时采用的线收缩率和表面粗糙度两种检测和村定方法具有很好的同一性。     

The amylose and lipid contents,dimensions, and gelatinisation characteristics of some wheat starches and their A- and B-granule fractions

Starches isolated from 23 bread wheats (Triticum aestivum) and 26 durum wheats (T. durum) contained 26.3-30.6% (mean 29.1%) total amylose, 19.3–25.1% (mean 22.9%) apparent amylose and 783–1144mg 100g^?1 (mean 977 mg 100g^?1) lysophos-pholipids. Gelatinisation temperatures were 57.3–64.9°C (mean 61.8°C) and enthalpies 6.4–11.8 Jg^?1 (mean 9.7Jg^?1) in excess water, measured by differential scanning calorimetry. There were no correlations between any of these parameters. Starch granule size distributions were determined with a Coulter Counter and 100–channel analyser. A-granule mean volumes were 1235–2585μm³ (av. 1778), modal volumes 863–1804μm³ (av. 1264), mean diameters 13.9–16.0μm (av. 13.99), and specific surface areas 0.236–0.302m²g^?1. B-granule mean volumes were 35.4–100.4μm³ (av. 55.9), modal volumes 16.5–54.5μm³ (av. 27.7), mean diameters 3.66–5.07μm (av. 4.09), and specific surface areas 0.684–0.920m²g^?1. The B-granule contents of the starches were 12.8–34.6% (av. 27.3) by weight (sedimentation method) and 13.0–37.3% (av. 24.0) by volume (Coulter method), the latter being the more accurate method.     

The influence of additives on the rheological and sensory properties of nonfat yogurt

In this work, response surface methodology was applied to a study of the effects of the addition of skim milk powder and stabilizers on the apparent viscosity and sensory attributes of nonfat yogurt. The addition of stabilizers has been shown to produce a significant effect on sensory attributes, while high concentrations of xanthan and guar gum are seen to decrease the overall acceptability of the yogurt, with gelatin producing the higher apparent viscosity and consistency. The correlation among apparent viscosity, which is an instrumental measurement, and consistency, which is a sensory evaluation, was 0.72.     

薄板坯表面变形实验分析

对连铸薄板坯的坯壳表面变形的物理模拟实验方法进行了分析,提出一种"铜裹铅双金属"新实验方案,并对坯壳表面弯曲变形进行了分析.     

Linear interpolation in a fuzzy information space

An approach to solving a linear interpolation problem in a fuzzy information space is proposed. Two different schemes of interpolation are outlined: a heuristic one, based on the geometrical interpretation of operations, and an optimization one, based on the expansion principle. The results obtained allow performing fuzzy linear prediction. __________ Translated from Kibernetika i Sistemnyi Analiz, No. 2, pp. 55–68, March–April 2006.     

差热法测定钢样表面氧与体内氧的方法研究

本文利用美国LECO公司生产的TC-436氧氮仪,研究了光谱纯Fe2O3,Al2O3和在大量脱氧铁存在下Al2O3的氧释放曲线,得到了它们的分解功率、分解电流和分解计算温度.成功地分离了钢样的表面氧和体内氧,并对钢样不同表面氧的组成做了初步研究.