Maximum principle for mean-field jump–diffusion stochastic delay differential equations and its application to finance

This paper investigates a stochastic optimal control problem with delay and of mean-field type, where the controlled state process is governed by a mean-field jump–diffusion stochastic delay differential equation. Two sufficient maximum principles and one necessary maximum principle are established for the underlying system. As an application, a bicriteria mean–variance portfolio selection problem with delay is studied to demonstrate the effectiveness and potential of the proposed techniques. Under certain conditions, explicit expressions are provided for the efficient portfolio and the efficient frontier, which are as elegant as those in the classical mean–variance problem without delays.     

Delay time compensation based on coefficient of restitution for collision hybrid motion simulator

A hybrid motion simulator embeds a hardware experiment in a numerical simulation loop. However, it is often subjected to the inherent problem of an energy increase in the collision of two pieces of hardware in a loop because of the delay time. This paper proposes a delay time compensation method based on contact dynamics model for a collision hybrid motion simulator under delay time and establishes a compensation method for coupled translational and rotational motion. The model developed in this paper describes linear uniform motion of a floating object during the period of the delay time until the force and torque are observed and non-linear motion according to environmental stiffness after the initial delay time period in contact. By using the above model, compensation parameters are designed based on desired coefficient of restitution with iterative calculation. The proposed method achieves accurate delay time compensation and simultaneously realizes a variable desired coefficient of restitution over a wide range of frequencies. Furthermore, the compensation method for multi-dimensional motion is established under the assumption that the friction effect is very small. The efficiency of the proposed method is verified through collision experiments for the coupled motion in two dimensions.     

软件定义网络中交换机处理时延的仿真

针对目前的网络仿真工具在对软件定义网络(SDN)的仿真过程中,未考虑交换机的处理时延的问题,提出一种处理时延的仿真方法,目的是为了使仿真结果更加真实和准确。该方法首先将交换机的转发处理过程分解为对流表的查询操作和执行不同的动作;然后,利用交换机的处理器频率和访存周期,将查询流表和执行动作转换为处理时间。实验中测量了真实环境中不同配置的交换机处理时延,并与利用该方法仿真出的处理时延进行对比。实验结果表明,利用该方法仿真出的处理时延和真实交换机的处理时延基本一致,该方法能够较准确地仿真交换机处理时延。     

一种多接口多信道VANET动态信道分配算法研究

为了合理地实现多接口多信道车载自组织网络（VANET）车辆节点间通信信道的动态分配,提出了一种基于通信双方车辆节点信道切换队列的动态信道分配算法。定义了车辆节点的射频接口状态,给出了信道的性能因子以及信道切换队列的生成方法,通过综合考虑通信双方车辆节点的射频接口状态和信道切换队列,快速自主地建立通信链路,从而解决了信道公平接入和分配不合理的问题。通过软件仿真比较可以看出,该算法实现了信道的动态分配,减小了平均端到端时延,增加了网络平均吞吐量,显著提高了多接口多信道VANET的网络性能。     

TETRA数字集群系统SNDCP层的设计与实现

为了满足TETRA数字集群用户对分组数据业务的需求,提出了一种TETRA数字集群交换机子网相关汇聚协议（SNDCP）的实现方案。在描述TETRA数字集群通信系统分组交换域架构的基础上,给出了SNDCP层的设计方案,并详细阐述了SNDCP层的实现过程中的关键技术;基于Telelogic TAU G2集成开发平台和Linux c开发环境,利用UML语言与C语言开发了SNDCP实体,实现了SNDCP层的功能。在TETRA数字集群通信系统中对SNDCP实体进行测试,测试结果符合TETRA数字集群系统空中接口协议标准,满足设计需求。     

Stability analysis and controller design of interval type-2 fuzzy systems with time delay

The type-2 fuzzy models can handle the system uncertainties directly based on the type-2 fuzzy sets. In this paper, the Takagi–Sugeno fuzzy model approach is extended to the stability analysis and controller design for interval type-2 (IT2) fuzzy systems with time-varying delay. Delay-dependent robust stability criteria are developed in terms of linear matrix inequalities by using the improvement technique of free-weighting matrices. Less conservative results are obtained by considering the information contained in the footprint of uncertainty. Finally, two simulation examples are presented to illustrate the effectiveness of the theoretical results. One is provided to show the merits of the proposed method, the other based on the continuous stirred tank reactor model is given to illustrate the design processes of IT2 fuzzy controller for a nonlinear system with parameter uncertainties.     

Three stage trade credit policy in a three-layer supply chain–a production-inventory model

The main purpose of this paper is to investigate the optimal replenishment lot size of supplier and optimal production rate of manufacturer under three levels of trade credit policy for supplier–manufacturer–retailer supply chain. The supplier provides a fixed credit period to settle the accounts to the manufacturer, while the manufacturer gives a fixed credit period to settle the account to the retailer and the retailer, in turn, also offers a credit period to each of its customers to settle the accounts. We assume that the supplier supplies the raw material to the manufacturer and sends back the defective raw materials to the outside supplier after completion of inspection at one lot with a sales price. The system always produces good items in the model. Also, we consider the idle times of supplier and manufacturer. Finally, numerical examples are provided to illustrate the behaviour and application of the model with graphical simulation.     

变电运行倒闸操作的危险点及预防对策探究

在实际操作中,由于变电运行非常复杂,很容易出现危险,因此,做好相关危险点的分析和预防工作,对保证电力系统运行安全有着非常重要的意义。结合变电运行倒闸操作中的危险点,对其预防对策进行了分析和探讨。     

浅谈变电运行中等电位倒闸操作的应用

倒闸操作是变电运行的重点和难点工作之一,倒闸操作的正确性直接关系到操作人员的人身安全及设备的安全运行,如果操作不当,将会导致整个电力系统处于崩溃的边缘,其重要性不言而喻。分析了倒闸操作的基本原理和存在的问题,并探讨了变电运行中等电位倒闸操作的具体程序。