含钼废渣冶炼钼铁的优化试验

利用含钼废料钼酸钙为原料,采用碳还原法冶炼钼铁,通过单因素分析试验及正交试验优化得出最佳的试验条件,钼酸钙加入量应低于10%,熔炼温度为1 525 ℃,保温时间为25 min,碱度为1.3。通过XRD、SEM、EDS分析得出用此方法生产得到的钼铁合金中,钼以Mo₂C、Fe₃Mo以及Fe₃Mo₃C的形式存在,渣系为二元玻璃渣系,具有与普通玻璃相似的成分系统。经测定合金中钼的回收率大于99%,钼资源回收效益可观。     

生产线试运行过程工艺分析软件的应用

介绍了生产线试运行过程中，用工艺分析软件解决所遇到的工艺问题，为工艺分析软件开拓了一个新的应用领域。     

复吹转炉“留渣 双渣”脱磷工艺试验

摘要：在国内某转炉钢厂采用“留渣 双渣”工艺技术进行脱磷工艺试验。结果表明：随着转炉前期脱磷率不断升高,终点脱磷率不断提高。铁水硅含量对前期脱磷率的影响最大。根据铁水成分,在冶炼前期适当降低供氧强度、降低气固氧比、加入适量石灰及烧结矿,均有利于前期脱磷率的提高。在一倒时每吨钢液加入4~8kg石灰,不影响出钢温度,可提高一倒-终点阶段脱磷率,同时可提高终点脱磷率。从终点的控制效果可知,终点炉渣碱度应保持不小于3.0,炉渣中FeO质量分数在16%~20%,并适当降低终点出钢温度在1610~1630℃,有利于终点脱磷率的提高。通过加强熔池搅拌,促进钢渣反应趋于平衡,有利于终点磷分配比提高,从而可进一步提高终点脱磷率。     

少片渐变刚度钢板弹簧的优化设计与计算

讨论了渐变刚度钢板弹簧的载荷、变形量、刚度和应力的计算，建立了少片渐变刚度钢板弹簧的优化数学模型，利用MATLAB优化工具箱进行优化，并给出了计算实例。     

Numerical Analysis of the Constrained Blister Test

The constrained blister test is investigated through finite element analysis to determine the applicabilities and the limitations of the new technique. Numerical results confirm that the strain energy release rate asymptotically approaches a constant value. These results also show that the test technique and the approximate solution for strain energy release rate are applicable for some practical cases.     

Effect of additives on formation of natural gas hydrate

The formation of natural gas hydrate (NGH) is studied in this work. Kinetics data of hydrate formation with no agitation were collected at various concentrations of the aqueous solutions with different additives such as alkylpolyglucside, sodium dodecyl benzene sulfonate and potassium oxalate monohydrate. Various kinds of additive increased the formation rates of NGH and its storage capacity and reduced the induction time of NGH formation. Moreover, the storage capacity, the induction time and the hydrate formation rate were influenced by the concentration of the aqueous solution.     

Estimating oxygen consumption from heart rate using adaptive neuro-fuzzy inference system and analytical approaches

In new approaches based on adaptive neuro-fuzzy systems (ANFIS) and analytical method, heart rate (HR) measurements were used to estimate oxygen consumption (VO₂). Thirty-five participants performed Meyer and Flenghi's step-test (eight of which performed regeneration release work), during which heart rate and oxygen consumption were measured. Two individualized models and a General ANFIS model that does not require individual calibration were developed. Results indicated the superior precision achieved with individualized ANFIS modelling (RMSE = 1.0 and 2.8 ml/kg min in laboratory and field, respectively). The analytical model outperformed the traditional linear calibration and Flex-HR methods with field data. The General ANFIS model's estimates of VO₂ were not significantly different from actual field VO₂ measurements (RMSE = 3.5 ml/kg min). With its ease of use and low implementation cost, the General ANFIS model shows potential to replace any of the traditional individualized methods for VO₂ estimation from HR data collected in the field.     

Comparative analysis of methods for determining the metabolic rate in order to provide a balance between man and the environment

The incorrect determination of metabolic rate can be linked to discrepancies between the model of the PMV (Predicted Mean Vote) and real thermal sensation collected in field studies. Aiming to improve the correlation of the PMV model and the real thermal sensation, this work established new values for the metabolic rate: one way being called “calculated” using Newton's Method and the other called "measured" using a metabolic analyzer. Welder's activities were evaluated, through the measurements of environmental and personal variables. New values of metabolic rate were determined for this activity. The values found for the calculated form and the measured one were, respectively, 178.63 and 145.46 W/m², different from the range provided by the table of ISO 8996 (2004) for this activity (75–125 W/m²). In order to verify which of the values of the metabolic rate was closer to the real thermal sensation of PMV, a linear regression was made between the PMV and the real thermal sensation in three ways: S × PMV_tabulated (R² = 0.1749), S × PMV_calculated (R ² = 0.7481) and S × PMV_measured (R² = 0.7854). It was found that the values measured by the instrument gave a higher coefficient of determination which was chosen for the correction of the table. The correction of the table provides a value of M_predicted, that is a value of metabolic rate that corrects the values provided by the tables of ISO 8996 (2004), by means of a correction coefficient. For the welder's activities in a metal-mechanics industry, tabulated values can be multiplied by the correction coefficient 1.4648 in order to minimize inaccuracies. The PMV_predicted, obtained through the M_predicted, when related to the actual thermal sensation, provides a coefficient of determination of 0.7511, thereby improving the model of the PMV.