试验温度和停放时间对胶料加工性能的影响

研究试验温度和停放时间对胶料加工性能的影响。结果表明，试验温度对胶料的门尼粘度、门尼焦烧时间和硫化特性均有一定影响。门尼粘度测定的试验温度选择100℃；门尼焦烧时间测定的试验温度一般选120℃，SBR胶料可提高至130℃左右，以缩短试验时间；硫化特性测定的试验温度一般选185℃。试验前模腔达到规定温度后再保持15min，以使转子与模腔温度一致。胶料停放时间应控制在2h左右。     

改进的APRIORI算法在试卷系统数据挖掘中的应用

本文通过对数据挖掘技术的研究,采用关联规则法对学生答题数据进行分析,并在关联规则使用中采用改进型的Apriori算法进行运算,构建高频集,并对于高分学生和低分学生的试卷进行了加权处理,使得高频集中的试题在知识点和难度上的关联更加突出,便于在自动组卷时更科学地评价试卷.     

基于B/S的资料信息管理系统的设计和实现

该文介绍了基于B/S资料信息管理系统的设计和开发,重点阐述了资料信息管理系统的开发设计的难点和要点,同时提供了部分数据库表信息和代码。     

Bulk and Interphase Effects in Aged Structural Joints

Although structural adhesives are becoming widespread in numerous applications, one important limitation at present is the long term behaviour of bonded assemblies under conditions of high humidity, especially at elevated temperatures. This study presents a comparison between bulk properties of a structural epoxy resin and its behaviour in a torsional joint consisting of a hollowed-out cylinder bonded to a plate—both substrates being in stainless steel. Exposure to ca. 100% relative humidity at 70°C leads to modification of the bulk properties of the polymer, notably reduction of its elastic modulus. Although this may explain some differences in behaviour of the torsional joint, premature failure is attributed to weaknesses in the interphase zone.

Auger Electron Spectroscopy (AES) has been employed to investigate both unbonded steel surfaces and fracture zones. Although prolonged exposure to water leads to a more extensive degree of (apparently) adhesive failure at the interface polymer/metal, AES has shown the presence of non-negligible quantities of carbon, attributed to residual polymer. Failure would seem to occur, at least partly, in a weak interphase of the polymer, near, but not at, the interface.

Various possible causes are evoked. For dry failure, residual polymer may be due to the topography of the metal surface and/or local modification of the adhesive during cure. In the case of aged joints, in addition there are potential effects due to swelling and differential stresses, secondary bond failure and molecular chain scission within the polymer, all provoked by the presence of water.     

考试综合管理信息系统的关键技术研究

基于.NET技术成功开发了考试综合管理信息系统,针对考试管理工作面临的问题,提出了相应的解决方案,并以此为依据介绍了该系统开发过程中的自动编排算法、安全策略等关键技术。该系统已成功运用,并解决了高校日益复杂的考务管理工作。     

电网企业物资集约化管理探讨

分析电网企业的物资集约化管理现状,明确物资集约化管理的重要性和必要性,从而探索研究电网企业物资集约化管理的途径.     

提升检测机构水平、保持体系有效的运行

探讨了检测机构提高管理水平和技术能力的途径,提出了保持管理体系的持续有效运行方法。     

导电涂料的研制

为了获得性能优良的导电涂料 ,采用对比试验和正交试验的方法对导电涂料进行了研究 ,分别对导电涂料的电阻、硬度、耐冲击强度、柔韧性等性能进行了测试 ,经过试验 ,确定了无机导电涂料的最佳配方为 :石墨 10 0g ,铅酸钡 10g ,三氧化二锑 5g ,二氧化钛 35g ,碳化硅 10g ,硅酸盐溶胶 170g。以此配方研制出了一种成本较低、生产工艺简单、具有良好的导电、导热性能的无机导电涂料。     

基于无线通信方式的TV二次压降现场测试方法

针对传统的TV二次压降现场测试方法存在的问题,提出基于无线通信技术的检测方法。以提高工作效率,降低安全风险。