车辆位置实时监测网的研制

ＲＴ－ＡＧＶＳ是物流管理中十分重要的课题，车辆位置监测网是其重要的组成部分。本文详细介绍了一个基于单片机系统的车辆位置实时监测网，本监测网设计先进，性能价格比高，它的设计方法和技术对其他许多领域有借鉴作用。     

A neural network model for fault detection in conjunction with a programmable logic controller

This paper discusses the feasibility of using neural networks as a tool in the fault detection process. A neural network is integrated with a state language programmable logic controller, an important device in an automatic control system. Time series data related to time spent in a state is gathered and used as input into a neural network, for the purpose of identifying when a fault has occurred. A feedforward neural network is used to identify which (if any) of three types of faults may have occurred. Experimental results related to sensitivity and accuracy measures are presented. A brief review of related applications and research is also presented.     

有环境约束时完成一族跟踪任务的力控制

本文为工业机器人提出了一种极点配置控制法，这种控制方法的优点有：一是它的积分作用消除了机器人的微小扰动和稳态误差；二是能任意设置系统的极点，因此能保证闭环系统的稳定性和规定状态变量的暂态响应；三是加入了加速度反馈，抑制了由电枢电感所引起的机械手的振动，最后，给出了ＰＵＭＡ５６２机器人的计算机仿真和实验结果验证了此控制法的有效性。     

Experimental and numerical investigation of fracture in double-edge notched steel plates

Double-edge notched (DENT) steel plates were pulled until complete fracture and several experimental observations were made (using profilometry and scanning electron microscopy). The essential work of fracture (EWF) model was found to be well verified. Numerical simulations—up to the maximum load only—of some experiments were performed using the finite element method (FEM), and incorporating geometric and material non-linearities (large deformation elasto-plasticity). Some experimental measurements were compared with the corresponding numerical computations and excellent agreement was found.     

用于非均匀介质重建的选代算法收敛性的研究

研究轴对称二维非均匀介质重建迭代算法的收敛性问题。首先借助于玻恩近似将非线性积分方程线性化，然后，利用玻恩迭代法和变形玻恩迭代法，由散射场数据对轴对称二维非均匀介质进行重建。通过几个例子研究了影响迭代算法收敛性的几种因素，如送代算法本身、积分离散化后的网格划分、正则化方法中的正则化参数选取等。     

四种别藻蓝蛋白三聚体的时间分辨荧光光谱研究

研究了从Ａｎａｂａｎａｖａｒｉｂｉｌｉｓ中提取的４种别藻蓝蛋白ＡＰＣＩ，ＡＰＣＩＩ，ＡＰＣＩＩ及ＡＰＣＢ三聚体的稳态光谱和皮秒荧光光谱。采用Ｍｏｎｔｅ－Ｃａｒｌｏ方法对瞬态荧光光谱进行拟合，实验结果表明：ＡＰＣＩ荧光有两个带，其中第一个带位于６６２ｎｍ，有两个时间组分：３５．８ｐｓ和１．６７ｎｓ；第二个带位于６８０ｎｍ，有两个时间组分：３４．２ｐｓ和１．６４ｎｓ；ＡＰＣＩＩ瞬态荧光位于６６０ｎｍ，有两个时间组分：２０．４ｐｓ和１．６４ｎｓ；ＡＰＣＩＩ瞬态荧光位于６６０ｎｍ，有两个时间组分：２３．８ｐｓ和１．７６ｎｓ；ＡＰＣＢ瞬态荧光有两个带，其中第一个带位于６６２ｎｍ，有两个时间组分：３６．６ｐｓ和１．４５ｎｓ；第二个带位于６８０ｎｍ，有两个时间组分：２５．８ｐｓ和１．６２ｎｓ。实验结果一方面说明了藻胆体核内４种别藻蓝蛋白形成能量传递的两条途径；另一方面瞬态荧光解叠结果揭示了ＡＰＣＩ和ＡＰＣＢ三聚体内能量传递的超快过程。     

强折射轴对称流场的干涉再现方法

利用光学方法测量气体状态参数的关键在于确定气体折射率场的变化。光线通过稳定的非均匀折射率场时发生偏折，并且在强折射对称场中会产生交叉，使得条纹位移量的判读困难。本文首先分析了光线在轴对称折射率场中的偏折效应，在此基础上，给出了一种利用成像透镜对强折射轴对称场中折射率的干涉再现方法。该方法与其它方法相比较能够精确地确定折射率ｎ（ｒ）的值。     

Prediction of High-Temperature Long-Term Strength for Damaged Structures

A method is proposed for analytical estimation of the high-temperature long-term strength of structures with material discontinuities, which are stress raisers. We consider the processes involving the formation of diffusion pores. Diffusion processes in metals are strongly enhanced with increasing temperature and stresses.     

柴油机低频排气噪声规律分析

针对柴油机（4－85）低频排气噪声，对其产生机理、规律及其影响因素等作了理论计算、分析及实验。对低频排气噪声信号进行频域分析后可知，其主要由一系列离散的谐波组成，是以柴油机点火频率为基频的一种类周期性噪声，有可能应用有源噪声控制技术。     

光敏丝室探测器PET的触发判选处理器

介绍了为光敏丝室探测器PET而设计的触发判选处理器（TRIG）的结构和原理，该处理器具有触发判选，计数率损失测量，随机符合事例率测量，探测器分区计数统计以及系统定标等多项功能，由于应用了EPLD技术和流水线作业等技术，实现了TRIG系统的高集成度和高性能 。