改进的永磁同步电机双矢量模型预测转矩控制

针对永磁同步电机（PMSM）传统模型预测转矩控制（MPTC）权重系数设置复杂、转矩和磁通脉动大的问题,提出了一种改进的PMSM双矢量MPTC方法。该方法扩展虚拟矢量以增加候选电压矢量,结合电压矢量作用于转矩和磁链的原则,减少选择候选矢量的计算量。同时,针对转矩无差拍和磁通无差拍,运用候选矢量的转矩占空比和磁通占空比构造了优化规则代替传统预测转矩控制中的代价函数,避免权重系数的整定问题。仿真结果表明,所提改进方法不仅提高稳态性能,而且能保持MPTC动态响应迅速的特点。     

Effect of Bio-Based Cobalt Alginate on the Fire Safety and Mechanical Properties for Epoxy Resin

There is a growing demand to develop epoxy resins (EP) with smoke suppression as well as satisfactory flame retardancy. Herein, bio-based cobalt alginate is successfully fabricated and incorporated into EP to prepare EP/Cobalt Alginate composites with better fire safety performance. The addition of cobalt alginate reduces the thermal-decomposition rate, temperature at maximum weight-loss rate of EP, whereas obviously improves the thermal stabilities at a higher temperature range. Furthermore, the addition of cobalt alginate substantially reduces the fire hazard of EP, resulting in 56.2% reduction in peak heat release rate, as well as 17.8% and 56.3% reduction in total smoke production and peak smoke production rate, respectively, compared with EP matrix. Moreover, the presence of cobalt alginate increases smoke-suppressant properties, according to the smoke density test. Additionally, the incorporation of cobalt alginate has no obviously destructive effect on the mechanical properties of EP, while EP/Cobalt Alginate-3 exhibits a 27.0% improvement in impact strength. In prospective, this study may provide a significant method for producing eco-friendly flame retardant EP.     

基于多变量解耦控制的配电网单相接地故障集成化柔性消弧方法

随着静止无功补偿装置、柔性消弧装置、大功率逆变器等电力电子装备应用逐渐增多,配电网柔性化加快发展,但已有电力电子装备存在功能单一、成本高等问题.基于直流侧并接储能元件的直挂式级联H桥变流器,将多变量解耦控制方法与电流消弧方法相结合,实现柔性电力电子装备输出电流在dq0坐标系下的独立调节,使单套柔性电力电子装备同时集成配电网有功功率、无功功率双向流动控制,以及单相接地故障柔性消弧功能,有效提高电力电子装备的利用效率.理论分析以及功率控制和单相接地故障消弧建模仿真结果验证了所提方法的可行性.     

Roll force,torque, lever arm coefficient,and strain distribution in edge rolling

Due to the growing importance of width control in strip and plate mills, edge rolling is currently an im-portant process in hot rolling mills. Research in edge rolling has been carried out, and in the present ar-ticle, models for roll force, torque, and lever arm coefficient are derived using the upper bound method. A simple, kinematically admissible deformation zone and velocity field, independent of friction in the roll gap, is proposed, and the energy dissipation rate is derived. The formula for energy dissipation rate has, in practice, no limitation because all edge rolling geometries are safely in the area where the formula is valid. Roll force and torque are derived by means of two independent integrals. Thus, the lever arm coef-ficient is evaluated from the expressions for roll force and torque using conventional rolling theory. Roll-ing trials report good agreement with theory. Measured roll forces are similar to calculated forces. Furthermore, the shape of the dogbone that arises during edge rolling is in fairly good agreement with the calculated dogbone shape. Deviations are due to the deviation from ideally plastic material in the ex-periments. Also, the strain distribution over the dogbone is similar to the proposed deformation zone. Thus, a new formula has been developed to a stage that it can be implemented in width control systems for edge rolling stands in hot strip and plate mills.     

液压伺服系统常用的干扰抑制方法

本文介绍了目前常见的抑制干扰的几种方法，分析了它们各自的特点和适用范围，为合理选择不同抑制干扰的方法提出了一些参考意见。     

An experimental evaluation of the effects of ripple current generated by the power conditioning stage on a proton exchange membrane fuel cell stack

In this article, an impedance model of the proton exchange membrane fuel cell stack (PEMFCS) is proposed. The proposed study employs an equivalent circuit of the PEMFCS derived by the frequency response analysis technique. An equivalent circuit for the PEMFCS is developed to evaluate the effects of ripple currents generated by the power-conditioning unit. The calculated results are then verified by means of experiments using a commercially available PEMFCS. The relationship between ripple current and fuel cell performance, such as power loss and fuel consumption, is investigated. Experimental results show that the ripple current can contribute up to a 6% reduction in the available output power. This paper was presented at the Fuel Cells: Materials, Processing, and Manufacturing Technologies Symposium sponsored by the Energy/Utilities Industrial Sector & Ground Transportation Industrial Sector and the Specialty Materials Critical Technologies Sector at the ASM International Materials Solutions Conference, October 13–15, 2003, in Pittsburgh, PA. The symposium was organized by P. Singh, Pacific Northwest National Laboratory, S.C. Deevi, Philip Morris USA, T. Armstrong, Oak Ridge National Laboratory, and T. Dubois, U.S. Army CECOM.     

拧紧力矩和热应力对螺纹插装阀的影响分析

在分析螺纹插装阀整体结构和工作原理的基础上,建立螺纹插装阀阀套与阀芯间隙变化量在拧紧力矩和热应力作用下的理论计算模型,通过理论计算分析其间隙的变化规律,同时结合有限元分析结果对计算模型进行初步验证。结果表明:该计算模型可以用于分析螺纹插装阀在热应力下的使用性能,对螺纹插装阀的设计使用具有一定的指导意义。     

Grinding-hardening with liquid nitrogen: Mechanisms and technology

This paper studies an innovative development of a steel grinding–hardening technology using an inert cryogen—liquid nitrogen. It was found that phase transformations took place during grinding with the application of liquid nitrogen and resulted in hardened surface layer in a ground component. The layer had a fine laths martensite structure which gave rise to a remarkably high hardness. It was also shown that the treatment can produce superior surface integrity, with compressive surface residual stresses and without surface oxidation. Due to the inert nature of the liquid nitrogen, the grinding process becomes environmentally conscious.     

塔式旋转混凝土布料机的工况计算及配重调控分析

塔式旋转混凝土布料机是一种可高效输送混凝土的工程机械,被广泛用于混凝土浇筑。施工过程中,为减小其布料端悬臂力矩、保证其塔架的稳定性,需要随时根据其伸缩桁架的伸缩量来调节其配重块的位置。运用有限元ANSYS软件,分析了布料机在极限工况条件下的结构强度和最大合力矩,计算了19种不同工况下力矩、桁架伸缩量及配重调节距离之间的数值关系。在此基础上,利用MATLAB的拟合优化功能得出三者之间的函数关系并绘制三维曲线。研究结果为塔式旋转混凝土布料机的安全运行提供数据支持,同时为其后续的优化设计提供参考。     

高水头船闸一字闸门水动力特性数值模拟

针对某山区高水头船闸30 m淹没水深下一字闸门的水动力特性进行研究,借助FLUENT软件提供的Realizable k-ε紊流模型对门体启闭过程非恒定流场进行动态模拟,通过建立由二维平面混合网格纵向拉伸成的三维棱柱体网格,结合2.5D重构和弹性光顺动网格法,在降低网格数量、提高计算效率的同时,实现一字闸门启闭全过程三维流场模拟。引入VOF法对自由水面迭代求解,得到一字闸门启闭过程门前后水位差及动水阻力矩变化规律,将计算结果与模型试验进行比较,两者吻合较好。模拟计算发现:门底间隙对闸门运行整个阶段动水阻力矩均有影响,动水阻力矩峰值随门底间隙增大而变小。