Relationship between Transformation Temperature and Time-Temperature-Transformation Curves of Tetragonal-to-Monoclinic Martensitic Transformation in Zirconia-Yttria System

The tetragonal → monoclinic ( t → m ) martensitic phase transformation in ZrO₂–0.5–4 mol% Y₂O₃ proceeds during isothermal aging at various temperatures from 350 to 800 K; i.e., the transformation increases sigmoidally with aging time. The time-temperature-transformation ( T - T - T ) curves show a typical C shape, with very high rate for lower Y₂O₃-content specimens, and the rate decreases with higher Y₂O₃ content. The transformation temperature ( M _s) of the t → m transformation obtained from dilatation curves during the cooling stage coincides well with C curves above the nose temperature. The t → m transformation should occur isothermally, as suggested by a nucleation and growth mode.     

一体化锅炉水处理剂的制备及性能研究

利用自制SW-56共聚物，复配有机磷酸盐和焦亚硫酸钠除氧剂及消泡剂，成功制备XF-4一体化锅炉水处理剂。对XF-4锅炉水处理剂的阻垢、缓蚀进行了试验研究，表明其具有优良的阻垢能力，可以明显抑制热水锅炉积垢现象；加入改性除氧剂能降低锅炉水中溶解氧的含量，使腐蚀控制较理想；配方中的消泡剂组分可防止锅炉水表面起泡，抑制高悬浮物下的携带作用。     

Studies on phase separation rate in porous polyimide membrane formation by immersion precipitation

Phase separation rate during porous membrane formation by immersion precipitation was investigated by light scattering in a polyimide/N‐Methylpyrrolidone (NMP)/water system. In the light scattering measurement, plots of scattered intensity against scattered angle showed maxima in all cases, which indicated that phase separation occurred by a spinodal decomposition (SD). Characteristic properties of the early stage of SD, such as an apparent diffusion coefficient D_app and an interphase periodic distance Λ, were obtained. The growth process of Λ was also followed by light scattering. The growth rate had the same tendency as D_app when water content in the nonsolvent bath and the polymer concentration in the cast solution were changed. The pore size of the final membrane increased with decreasing water content, which was opposite to the tendency of Λ growth rate. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 292–296, 2003     

Energy Efficiency of Two‐Phase Mixing in a Modified Bubble Column

Energy efficiency for gas liquid mixing in a modified downflow bubble column reactor has been analyzed in this paper. Efficiencies of the different parts of the bubble column have been assessed on the basis of energy dissipation. Prediction of the energy dissipation coefficient as well as energy utilization efficiency due to gas‐liquid mixing as a function of different physical, geometric and dynamic variables of the system has been done by correlation method. The distribution of energy utilization in the different zones of the column has also been analyzed. Experiments were carried out with air‐water and air‐aqueous solutions of carboxy methyl cellulose with different concentrations.     

Characterization of electrodeposited WO3 films and its application to electrochemical wastewater treatment

WO₃ films have been prepared on to IrO₂-coated Ti substrate by cathodic deposition, and as-deposited and annealed films have been characterized using XRD, TEM, Raman and FT-IR spectroscopy. The as-deposited film consists of nanocrystalline, orthorhombic WO₃·H₂O and this phase transforms to amorphous WO₃ by annealing at 250 °C and to monoclinic WO₃ by annealing at and above 350 °C. The as-deposited and annealed films have been used as anodes for electrochemical decomposition of phenol in aqueous solutions with and without chloride ions. The monoclinic WO₃ anodes prepared by annealing at 350 and 400 °C show relatively high electrochemical activity in the chloride-containing solution. In addition, the anodes possess high chemical and physical stabilities: very low dissolution rate of WO₃ during the electrolysis and good adhesion to the substrate. Thus, WO₃ anodes may be promising materials for anodic oxidation of bio-refractory organics in wastewater, although further improvement of electrochemical activity is needed for more effective decrease in total organic carbons in wastewater.     

6,6'-二甲基-2,2'-联吡啶固相萃取光度法测定水中铜的研究

根据试剂6,6' 二甲基 2,2' 联吡啶与铜(Ⅰ)的显色反应及WatersPorapakR○　Sep Park固相萃取小柱对显色配合物的固相萃取,建立了一种测定水样中μg/L级铜的新方法,在pH=4.5HAc NaAc缓冲介质中,6,6' 二甲基 2,2' 联吡啶与铜(Ⅰ)反应生成2∶1稳定配合物,该配合物可用WatersPorapakR○　Sep Park固相萃取小柱富集,小柱上富集的配合物用乙醇(内含1%醋酸)洗脱后用光度法测定,可测定水样中μg/L级的铜。该方法用于几种水样中铜含量的测定,结果令人满意。     

含氨废水处理技术及工艺设计方案

本文根据氮肥厂废水的特点，研究了高浓度氨氮废水的处理方法-吹脱法的除氨机理和氨氮去除率的影响因素。针对pH值和温度对氨氮去除率的影响，我们做了实验，结果表明若去除率要达到90％以上，pH值必须大于12且温度高于90C。同时可以用CaO将废水的pH值调节到12以上。最后，针对这种废水的处理设计了可行的工艺方案。     

废水处理中的复极性固定床电解槽技术

复极性固定床电解槽（bipolar packed bed cell,BPBC)是在三维电极原理基础上发展起来的新型电化学工程技术，其在治理含氰及重金属废水、有机废水和印染废水方面具有良好的处理效果。介绍了BPBC的电化学特性，综述了国内外BPBC废水处理技术应用现状及其机理研究的概况。同时，提出了该技术目前存在的问题，并对其进一步的深入研究作了展望。     

国外柴油车减少排放污染的发展趋势

叙述了美国和欧共体柴油车排放法规和最新发展及世界主要固定柴油质量和规格的最新发展趋势，报道了柴油组成和性质对排放物影响的主要研究结果；分析了减少柴油车排放污染的主要措施，例如改进发动机、改进炼油工艺、采用尾气处理、采用颗粒物过滤－捕集器及采用减少尾气排污的三类柴油添加剂，最后提出了几点建议。